木材測試夾具
木材材料的特性分析需要在不同負載條件下進行一系列測試，例如拉伸、壓縮、剪切和彎曲。Instron 提供一系列高性能木材測試夾具，符合相關 ASTM、ISO、EN、JIS 及其他測試標準的要求。
木材材料的特性分析需要在不同負載條件下進行一系列測試，例如拉伸、壓縮、剪切和彎曲。Instron 提供一系列高性能木材測試夾具，符合相關 ASTM、ISO、EN、JIS 及其他測試標準的要求。
請填寫下方表格，我們將很樂意與您聯繫並回覆。我們通常會在 1-2 個工作天內回覆線上請求。如需更快回覆，請致電 +886-3-572-2155。
作為首屈一指的延伸計解決方案，AVE3 在
，抗拉、抗壓和彎曲測試的準確度高達 1 微米。AVE3 提供
、複合材料的爆炸性破壞，甚至可在腔室或液浴中進行非環境測試。AVE3 符合
ISO 9513 和 ASTM E83 標準，這表示您可以使用單一裝置可靠地依任何標準進行測試，無需購買
和維護多個夾式裝置。
AVE3 幾乎可以測量所有應用的模量和斷裂應變，包括扁平和圓形樣品的靜態拉伸、彎曲和 壓縮試驗。測量可以在環境條件下進行，也可以在高溫和低溫條件下進行 使用環境箱或液體槽進行測量。無論您測試的是塑膠、金屬、複合材料、紡織品、 薄膜、箔片、彈性體、紙張、組件或生物材料，AVE3 都能提供豐富的功能，以滿足不斷變化的測試需求 並符合以下標準。
鏡頭經過配置並在工廠進行校準，以適用於您獨特的測試設定。光圈和對焦設定已鎖定，以
注意：選擇鏡頭時，請確保您知道最小和最大標距長度要求，以及您計劃測試的試樣範圍的總伸長率。
借助新的 AVE3，您現在能夠執行需要應變控制的測試，包括 ASTM E8 和 ISO 6892。 憑藉準確度的進步和 500 Hz 的資料擷取速率，AVE3 可提供快速的見解，使 測試系統能夠即時回應應變速率的變化 — 確保您擁有符合測試標準的可重複和可比較的 結果。
AverEdge32 是 AVE3 的一個可選進階功能，它利用邊緣偵測技術同時 測量沿試樣標距長度 32 個位置的橫向應變。然後，它會即時對它們進行平均， 從而產生平滑且可重複的橫向應變值，這對於計算金屬板的 r 值至關重要。
數位圖像相關 （DIC） 是一種光學技術，可比較被測樣品表面的圖像以生成全場 應變和位移圖。它創建的圖片可用於可視化試樣整個二維表面上的應變和位移。
Instron 的液壓夾具泵專為高負載測試應用提供精確可靠的夾持力而設計，支援負載能力高達 600 kN。
These machines are developed to obtain specimens by punching, using hollow dies of different sizes and contours. Several hundreds of dies can be created by interchangeable socket punches with different profiles and size according to the standards and to the customer needs. Dies are made of steel with hand finished cutting edges and can be provided with ejector for easy removal of the specimen after punching.
Compact design of instrument for an easy and fast preparation
Manual and automatic models obtain specimens of different size and geometries for a wide range of plastics testing applications
High level of results repeatability and time saving test procedures
For Universal Testing Systems
Our standard furnaces, mounts, grips, and load string assemblies for universal testing systems allow for testing up to 1200°C in air. Our engineered solutions group is also able to develop solutions to meet higher temperature requirements and additional furnace dimensions.
1200°C Three-Zone Split Tube Furnace
This three-zone split tube furnace features a side entry extensometer port and is manufactured with a wire-wound element for maximum operation up to 1200°C (2200°F). The elements are uniquely formed to provide optimum temperature uniformity, ensuring conformance with testing standards such as ASTM E21, ISO 6892-2, EN10002-5,and EN2002-2. The top and bottom furnace endplates are durable, provide excellent insulation, and include a 20 mm (0.787 in) diameter hole for use with pull rods.
| Specifications | |||
| Specimen Temperature Range | 200 - 1050°C (392 - 1922°F) | ||
| Overall Heated Length | 300 mm (11.81 in) | ||
| Interior Diameter | 75 mm (2.95 in) | ||
Mounting brackets are used to securely attach the furnace to the test system.
| Specifications | |||
| Description | Catalog No. | ||
| Floor Model Standard Furnace Mounting A standard 3-knuckle design furnace mounting that allows for manual adjustments. | CP119938 | ||
| Floor Model Advanced Furnace Mounting The advanced mounting allows for quick and easy fine adjustments of the vertical position of the furnace as well as parallelism to the load string. | CP107737 | ||
Three-Zone Temperature Control Systems
Temperature control systems are designed for controlling the heat output of furnaces. The control systems can be configured to operate nearly any furnace with any one of several different thermocouples types. Three zone control systems are designed for heat-only furnaces with three separate zones of heating elements, and typically three different thermocouples to control those zones.
| Specifications | |||
| Description | Catalog No. | ||
| Type K Control System | 3119-960 | ||
| Type R/S Control System | 3119-962 | ||
| Stepdown Transformer The wall mount 3KVA stepdown transformer assembly provides the ability to operate the 120V, single phase Model TCS3203 3-zone furnace control system from 190/200/208/220V, 50/60Hz power sources. | W-C015-TRAN | ||
Quick-change adapters are typically used in hot tensile applications to provide simplified load train installation. They consist of a button-head washer that is threaded onto the room temperature end of a pull rod. The washer and pull rod are then inserted through a slot in the adapter body.
| Specifications | |||
| Force Capacity | Effective Length | Catalog No. | |
| 90 kN | 6.43 in | W-7556M4 | |
| 10 kN | 5.58 in | W-7556M2 | |
Threaded End Specimen Holders
Catalog No. W-7551-C
Threaded-end specimen holders made of Inconel 713-C rated for a maximum temperature of 1100 Deg. C (2000 Deg. F).
| Specifications | ||
| Specimen Thread Size | Catalog No. | |
| Metric M6 x 1.0 | W-7551-CM1 | |
| Metric M8 x 1.0 | W-7551-CM2 | |
| Metric M8 x 1.25 | W-7551-CM3 | |
| Metric M10 x 1.5 | W-7551-CM4 | |
| Metric M12 x 1.5 | W-7551-CM5 | |
| Metric M12 x 1.75 | W-7551-CM6 | |
| Metric M14 x 2.0 | W-7551-CM7 | |
| Metric M16 x 1.5 | W-7551-CM8 | |
| Metric M16 x 2.0 | W-7551-CM9 | |
| Metric M18 x 2.5 | W-7551-CM10 | |
| Metric M19 x 1.5 | W-7551-CM11 | |
| US Customary 10-24 | W-7551-CU1 | |
| US Customary 10-32 | W-7551-CU2 | |
| US Customary 1/4-20 | W-7551-CU3 | |
| US Customary 1/4-28 | W-7551-CU4 | |
| US Customary 5/16-24 | W-7551-CU5 | |
| US Customary 5/16-18 | W-7551-CU6 | |
| US Customary 3/8-16 | W-7551-CU7 | |
| US Customary 3/8-24 | W-7551-CU8 | |
| US Customary 7/16-14 | W-7551-CU9 | |
| US Customary 1/2-13 | W-7551-CU10 | |
| US Customary 5/8-11 | W-7551-CU11 | |
| US Customary 3/4-10 (Type R3f) | W-7551-CU12 | |
Pull Rods
High temperature pull rods made of made of Inconel 713-C for strength and resistance to corrosion and oxidation. Both ends are threaded 0.75-10m-RH and are compatible with a range of grips, adapters, and specimen holders.
Rated for 9070 kgs (20,000 lbs) load up to 760°C (1400°F) and 1360 kgs (3000 lbs) load at a maximum temperature of 1100°C (2000°F).
| Specifications | |||
| Pull Rod Length | Force Capacity | Catalog No. | |
| 273 mm (10.75 in) | 90 / 26.7 kN | W-7546-C | |
| 330 mm (13.00 in) | 90 / 26.7 kN | W-7547-C | |
High Temperature Tension Wedge Grips
Catalog No. W-7554
One set (2) wedge grip specimen holders made of Hastelloy X. Holders designed for tension-only loading and may be equipped to accept flat specimens from 1.13 mm to 3.18 mm thick (0.005 in to 0.125 in) by 12.7 mm to 22.225 mm wide (0.5 in to 0.875 in). Design of holders requires drilling of holes in specimen end tabs for initial loading and jaw alignment. Centering pin diameter 4.1148 mm (0.162 in). Holders are 70mm (2.75 in) long by 38mm (1.375 in) diameter contain 0.75-10f-RH thread for attachment to pull rods. Jaw inserts ordered separately, selected based on thicknesses of specimens to be tested. See W-7554-A1, -A3, and -A4 below for available inserts and corresponding thickness ranges.
| Specifications | |||
| Specimen Diameter | Pin 4.1148 mm (Pin 0.162 in) | ||
| Specimen Thickness | 1.13 - 3.18 mm (0.005 - 0.125 in) | ||
| Specimen Width | 12.700 - 22.225 mm (0.500 - 0.875 in) | ||
| Temperature Rating | 926°C (1700°F) | ||
High Temperature Wedge Jaw Inserts
One set (two pairs) of high temperature wedge jaw inserts for use with the W-7554 high temperature tension wedge grips.
| Specifications | |||
| Type | Specimen Thickness | Temperature Rating | Catalog No. |
| Smooth-Faced | 0.13 to 1.0 mm (0.005 to 0.040 in) | 926°C (1700°F) | W-7554-A1 |
| Serrated-Faced | 1.0 to 2.0 mm (0.040 to 0.078 in) | 926°C (1700°F) | W-7554-A3 |
| Serrated-Faced | 2.0 to 3.18 mm (0.078 to 0.125 in) | W-7554-A4 | |
Pin and Clevis Holders
Pin and clevis specimen holders are designed for flat specimens that have a hole in each end. The specimen fits into the slot of the holder and is secured by the pin.
Note: Using a specimen that is smaller (thinner) than the slot width specified for a given set of holders can result in misalignment of the specimen.
| Specifications | |||
| Material | Iconel 713-C | ||
| Temperature Rating | 1100°C (2000°F) | ||
| Upper and Lower Fittings | US Customary 3/4 in-10 (Type R3f) | ||
| Coupling Length | 69.9 mm (2.75 in) | ||
| Coupling Diameter | 28.6 mm (1.125 in) | ||
| Available Sizes | |
| Size | Catalog No. |
| 1 mm slot, 3 mm pin | CP112249 |
| 2 mm slot, 3 mm pin | CP112250 |
| 3 mm slot, 4 mm pin | CP112251 |
| 4 mm slot, 4 mm pin | CP112252 |
| 6 mm slot, 6 mm pin | CP112253 |
| 10 mm slot, 10 mm pin | CP112255 |
用於彎曲、彎曲和斷裂韌性黏合測試
彎曲工裝可以進行各種彎曲和斷裂韌性黏合測試，包括測定彎曲模量、彎曲強度和彎曲屈服強度。 安裝簡便，三點式夾具可透過選配的轉換套件改裝為四點彎曲轉換。下部砧座可調整以容納不同跨距的試樣。試樣的偏移量可透過橫樑位移進行測量，或者為了更精確的測量，您可以使用中跨距直接測量柱塞配合夾式延伸計。
工作原理
試樣支撐在兩個精確加工的、半徑確定的砧座上。力施加於試樣中心（3點式）或中心兩側規定距離處（4點式）。支撐梁縱向刻有公制刻度，以便準確定位砧座，砧座與中心線等距分佈。
特徵
應用範圍
載重類型：靜態彎曲、循環彎曲試驗
試樣材料：塑膠、金屬、合金、複合材料、陶瓷等材料
試樣形狀：條狀、棒狀、部件
常見標準：ASTM D790、ISO 178
| 規格 | |
|---|---|
| 目錄編號 | 2810-400 |
| 最大容量 | 5 kN（1125 磅力、500 公斤力） |
| 溫度範圍 | -100 °C 至 350 °C（-148 °F 至 660 °F） |
| 可調跨距 | 10 - 200 毫米（0.39 - 7.87 英寸） |
| 查看完整規格 | 下載手冊 |
Today's testing laboratories and manufacturers have a wide variety of material and component testing needs. To meet these varying requirements, Instron has several accessories designed to help interface with external equipment and measuring devices.
2810-500/505
有關更多資訊，請下載文獻
訪問 ElectroPuls 網頁
Revolutionary Strain Control
Revolutionary Strain Control
If you want to protect your strain measurement device from damaging shock loads then contact us to discuss your non-contacting strain application today.
叉形對叉形轉接器用於具有比負載元件或機器轉接器更大或更小叉形的夾具和固定裝置連接。
| 可用型號 | |||
| 端部 1 | 端部 2 | 連接類型 | 目錄編號 |
| 公 - Type OO (6 mm 連接，2.5 mm 叉形銷) |
母 - Type O (12 mm 連接，6 mm 叉形銷) |
剛性 | 2501-350 |
| 公 - Type OO (6 mm 連接，2.5 mm 叉形銷) |
母 - Type C (5/8 英吋連接，1/4 英吋叉形銷) |
剛性 | S1-13807 |
| 公 - Type O (12 mm 連接，6 mm 叉形銷) |
母 - Type B (1/2 英吋連接，3/16 英吋叉形銷) |
剛性 | 2501-134 |
| 公 - Type O (12 mm 連接，6 mm 叉形銷) |
母 - Type C (5/8 英吋連接，1/4 英吋叉形銷) |
剛性 | 2501-133 |
| 公 - Type O (12 mm 連接，6 mm 叉形銷) |
母 - Type D (1.25 英吋連接，1/2 英吋叉形銷) |
剛性 | 2501-093 |
| 公 - Type D (1.25 英吋連接，1/2 英吋叉形銷) |
母 - Type O (12 mm 連接，6 mm 叉形銷) |
剛性 | 2501-346 |
| 公 - Type D (1.25 英吋連接，1/2 英吋叉形銷) |
母 - Type B (1/2 英吋連接，3/16 英吋叉形銷) |
剛性 | 2501-119 |
| 公 - Type D (1.25 英吋連接，1/2 英吋叉形銷) |
母 - Type C (5/8 英吋連接，1/4 英吋叉形銷) |
剛性 | 2501-120 |
| 公 - Type D (1.25 英吋連接，1/2 英吋叉形銷) |
母 - Type 1 (34 mm 連接，16 mm 叉形銷) |
剛性 | 2501-338 |
叉形對叉形轉接器用於具有比負載元件或機器轉接器更大或更小叉形的夾具和固定裝置連接。柔性轉接器用於某些應用中的試樣對準。
| 可用型號 | |||
| 端部 1 | 端部 2 | 連接類型 | 目錄編號 |
| 公 - Type OO (6 mm 連接，2.5 mm 叉形銷) |
母 - Type B (1/2 英吋連接，3/16 英吋叉形銷) |
柔性 | 2501-115 |
| 公 - Type OO (6 mm 連接，2.5 mm 叉形銷) |
母 - Type C (5/8 英吋連接，1/4 英吋叉形銷) |
柔性 | 2501-157 |
| 公 - Type O (12 mm 連接，6 mm 叉形銷) |
母 - Type O (12 mm 連接，6 mm 叉形銷) |
柔性 | 2501-348 |
| 公 - Type O (12 mm 連接，6 mm 叉形銷) |
母 - Type B (1/2 英吋連接，3/16 英吋叉形銷) |
柔性 | 2501-109 |
| 公 - Type O (12 mm 連接，6 mm 叉形銷) |
母 - Type C (5/8 英吋連接，1/4 英吋叉形銷) |
柔性 | 2501-094 |
| 公 - Type O (12 mm 連接，6 mm 叉形銷) |
母 - Type D (1.25 英吋連接，1/2 英吋叉形銷) |
柔性 | 2501-091 |
| 公 - Type D (1.25 英吋連接，1/2 英吋叉形銷) |
母 - Type D (1.25 英吋連接，1/2 英吋叉形銷) |
柔性 | 2501-356 |
| 公 - Type 1 (34 mm 連接，16 mm 叉形銷) |
母 - Type C (5/8 英吋連接，1/4 英吋叉形銷) |
柔性 | 2501-170 |
| 公 - Type 1 (34 mm 連接，16 mm 叉形銷) |
母 - Type D (1.25 英吋連接，1/2 英吋叉形銷) |
柔性 | 2501-090 |
當負載元件或機器具有螺紋連接時，叉形對螺紋轉接器用於落地型系統的夾具和固定裝置連接。
| 可用型號 | |||
| 端部 1 | 端部 2 | 連接類型 | 目錄編號 |
| 公頭 - Type D (1.25 英吋連接，1/2 英吋叉形銷) |
公頭 - Type I (M30x2 右旋螺紋) |
剛性 | 2501-173 |
| 公頭 - Type D (1.25 英吋連接，1/2 英吋叉形銷) |
公頭 - Type II (M48x2 右旋螺紋) |
剛性 | 2501-172 |
| 公頭 - Type 1 (34 mm 連接，16 mm 叉形銷) |
母頭 - Type O (12 mm 連接，6 mm 叉形銷) |
剛性 | 2501-159 |
| 公頭 - Type 1 (34 mm 連接，16 mm 叉形銷) |
母頭 - Type D (1.25 英吋連接，1/2 英吋叉形銷) |
剛性 | 2501-092 |
| 公頭 - Type 1 (34 mm 連接，16 mm 叉形銷) |
公頭 - Type I (M30x2 右旋螺紋) |
剛性 | 2501-073 |
| 公頭 - Type 1 (34 mm 連接，16 mm 叉形銷) |
公頭 - Type II (M48x2 右旋螺紋) |
剛性 | 2501-171 |
| 公頭 - Type I (M30x2 左旋螺紋) |
母頭 - Type D (1.25 英吋連接，1/2 英吋叉形銷) |
剛性 | 8005-061 |
| 公頭 - Type II (M48x2 左旋螺紋) |
母頭 - Type D (1.25 英吋連接，1/2 英吋叉形銷) |
剛性 | 8005-062 |
螺紋轉接器通常用於高容量測試的夾具和固定裝置。它們適用於大多數液壓負載串連接、超過 100kN 的負載串，以及具有螺紋底座和負載元件連接的系統。
| 可用型號 | |||
| 端部 1 | 端部 2 | 連接類型 | 目錄編號 |
| 公 - Type II (M48x2 左旋螺紋) |
母 - 1.5 英吋 -12 右旋螺紋 | 剛性 | 2501-206 |
| 公 - Type II (M48x2 左旋螺紋) |
母 - Type I (M30x2 左旋螺紋) |
剛性 | 2501-205 |
| 公 - Type II (M48x2 左旋螺紋) |
母 - 2 英吋 -12 右旋螺紋 | 剛性 | 8005-022 |
| 公 - Type I (M30x2 左旋螺紋) |
公 - Type I (M30x2 右旋螺紋) |
剛性 | 8005-041 |
| 公 - Type I (M30x2 左旋螺紋) |
公 - Type II (M48x2 右旋螺紋) |
剛性 | 8005-045 |
| 公 - Type II (M48x2 左旋螺紋) |
公 - Type I (M30x2 右旋螺紋) |
剛性 | 8005-046 |
| 公 - Type II (M48x2 左旋螺紋) |
公 - Type II (M48x2 右旋螺紋) |
剛性 | 8005-042 |
| 公 - Type IIA (M72x3 左旋螺紋) |
公 - Type IIA (M72x3 右旋螺紋) |
剛性 | 8005-043 |
機器底座轉接器通常用於將夾具或固定裝置連接到機器上。在 10 kN 及以下的機器上，使用帶有螺絲通孔的叉形轉接器。在 30 kN、50 kN 和 100 kN 的機器上，使用帶有叉形和螺栓圓的法蘭轉接器。對於 100 kN 以上的機器，請參見螺紋轉接器部分。
| 可用型號 | |||
| 端部 1 | 端部 2 | 連接類型 | 目錄編號 |
| 6 x M10 螺栓圓 | 母 - Type D (1.25 英吋連接，1/2 英吋叉形銷) |
剛性 | 2501-113 |
| 6 x M10 螺栓圓 | 母 - Type II (M48x2 左旋螺紋) |
剛性 | 2501-148 |
快速安裝負載元件轉接器可以更輕鬆地將高達 50 kN 的負載元件固定到橫梁上。轉接器的一部分安裝在橫梁上，另一部分安裝在負載元件上 – 使負載元件能夠在橫梁上穩固懸掛，無需支撐，同時您可以穿過螺栓完成安裝。還提供其他負載元件轉接器，可用於多種負載元件。
| 可用型號 | |
| 說明 | 目錄編號 |
| 5900 或 6800 台式機型用於 2580、2530 和 2525 系列負載元件的完整套件 (包含橫梁轉接器和一個負載元件轉接器) |
2501-212 |
| 500 N - 5 kN 2580 負載元件的額外負載元件轉接器 | 2501-213 |
| 適用於 10 kN – 50 kN 2580 Load Cells 的額外荷重元轉接器 | 2501-214 |
| 適用於 5 N – 5 kN 2530 Load Cells 的額外荷重元轉接器 | 2501-215 |
背負式荷重元轉接器允許系統的主要荷重元保持在原位，同時安裝次要的低容量荷重元。
| 可用型號 | ||||
| 相容的主要荷重元連接類型 | 相容的次要荷重元 | 產品目錄編號 | ||
| D 型 | 500 N 至 5 kN 用於安裝 2580 Series 荷重元。 | 2501-208 | ||
| D 型 | 5 N 至 5 kN 用於安裝 2530 Series 荷重元。 | 2501-210 | ||
| D 型 | 10 kN 至 50 kN 用於安裝 2580 Series 荷重元。 | 2501-209 | ||
| II 型 (M48) | 500 N 至 50 kN 2580 Series，從 500 N 到 50 kN（M10 或 M16 連接螺栓） 2530 Series，從 500 N 到 50 kN（M10 或 M16 連接螺栓） 2525 Series，從 50 kN 或更小 2519 Series，從 10 N 到 5 kN（M6 或 M10 連接螺栓） 2518 Series，從 50 kN 或更小 |
2501-227 | ||
| IIA 型 (M72) | 500 N 至 50 kN 2580 Series，從 500 N 到 50 kN（M10 或 M16 連接螺栓） 2530 Series，從 500 N 到 50 kN（M10 或 M16 連接螺栓） 2525 Series – 500 N 到 50 kN 2519 Series，從 10 N 到 5 kN（M6 或 M10 連接螺栓） |
2501-228 | ||
背負式荷重串轉接器允許高容量夾具保留在荷重串上，同時提供連接以利用各種其他夾具。
| 可用型號 | ||||
| 主要夾具 | 提供的連接 | 產品目錄編號 | ||
| 100 kN 液壓楔形夾具（產品目錄編號 2743-401） | Df 型（低外形） | 2501-258 | ||
| 100 kN 液壓楔形夾具（產品目錄編號 2743-401） | Df 型 | 2501-260 | ||
| 300 kN 液壓楔形夾具（產品目錄編號 2742-501） | II 型 (M48) | 2501-255 | ||
| 300 kN 液壓楔形夾具（產品目錄編號 2742-501） | Df 型 | 2501-256 | ||
| 600 kN 液壓楔形夾具（產品目錄編號 2743-601） | IIA 型 (M72) | 2501-259 此轉接器僅可用於壓縮應用。 | ||
| 100 kN 精密手動楔形夾具（產品目錄編號 2716-028） 250 kN 精密手動楔形夾具（產品目錄編號 2716-030） |
Df 型 | 2501-700 | ||
| 100 kN 精密手動楔形夾具（產品目錄編號 2716-028） 250 kN 精密手動楔形夾具（產品目錄編號 2716-030） |
II 型 (M48) | 2501-702 | ||
直通式荷重元轉接器可將 2580 Series 荷重元安裝到舊款 Instron 萬用試驗系統和已進行 6800 Series 系統改造的系統。轉接器直接穿過橫樑放置，可用於高達 100 kN 力的桌上型和落地型系統。
| 可用型號 | ||||
| 框架相容性 | 荷重元相容性 | 最大淨空減少量 | 產品目錄編號 | |
| 4464、4465、4466、5564、5565、5566 | 2580 Series （500 N - 10 kN） |
153 mm | 2501-290 | |
| 4467、4469、5567、5569 | 2580 Series （500 N - 10 kN） |
165 mm | 2501-291 | |
| 4481、5581 | 2580-50kN (50 kN) |
133 mm | 2501-291 | |
| 4482、5582 | 2580-100kN (100 kN) |
111 mm | 2501-292 | |
萬向球形拉伸轉接器 (USTA) 套件為拉伸應用提供獨特的球形運動，在這些應用中，對準至關重要且需要少量補償。這些螺紋轉接器用於將拉伸夾具安裝到機器荷重元或底座，或用於次要荷重串轉接。
| 可用型號 | ||||
| 力容量 | 端 1 機器介面 | 端 2 配件介面 | 連接類型 | 產品目錄編號 |
| 300 kN | IIm 型 (M48x2m LH) |
300 kN 容量：R4m 型 (M36x4) 100 kN 容量：R3f 型 (0.75-10) |
一個球形 一個剛性 |
W-5551-A |
| 300 kN 縮短 |
IIm 型 (M48x2m LH) |
完整容量：R4m 型 (M36x4) 100 kN 容量：R3f 型 (0.75-10) |
一個球形 一個剛性 |
W-5551-G |
| 300 kN | IIm 型 (M48x2m LH) |
300 kN 容量：R4m 型 (M36x4) 100 kN 容量：R3f 型 (0.75-10) |
兩個球形 | W-5551-B |
| 100 kN | Dm 型 (1.25 英吋連接) |
完整容量：R4m 型 (M36x4 RH) 100 kN 容量：R3f 型 (0.75in-10 RH) |
一個球形 一個剛性 |
W-5551-H |
| 300 kN 螺紋轉接器襯套套件 | R4f 型 (M36x4f) | 剛性 | W-5551-D | |
| 600 kN | IIAm 型 (M72x3m LH) |
600 kN 容量：IIm 型 (M48x2m) 100 kN 容量：R3f 型 (0.75-10) 螺紋 |
一個球形 一個剛性 |
W-5552-A |
| 600 kN | IIAm 型 (M72x3m LH) |
600 kN 容量：IIm 型 (M48x2m) 100 kN 容量：R3f 型 (0.75-10) 螺紋 |
兩個球形 | W-5552-B |
| 400 kN | IIm 型 (M48x2m LH) |
400 kN 容量：IIm 型 (M48x2m) 100 kN 容量：R3f 型 (0.75-10) 螺紋 |
一個球形 一個剛性 |
W-5552-E |
| 400 kN | IIm 型 (M48x2m LH) |
400 kN 容量：IIm 型 (M48x2m) 100 kN 容量：R3f 型 (0.75-10) 螺紋 |
兩個球形 | W-5552-F |
| 600 kN 螺紋轉接器襯套套件 | IIf 型 (M48x2f) | 剛性 | W-5552-G | |
Versatile Gripping Solution for a Wide Range of Materials and Specimen Types
Pneumatic side action grips are an effective solution for gripping a wide range of materials and specimen types, including fibers, wires, sheet, foils, film, textiles, plastics, elastomers, and components. Repeatable gripping force and speed of operation make pneumatic grips the ideal choice for a wide range of testing applications. In addition, the 2712-04x and 2712-05x grips also have a number of enhanced features to further improve ease of use, repeatability and operator safety including jaw face shields, super-quick jaw face changes and an optional specimen centering device.
50 N - 10 kN Force Capacities
Mid-Range Grips
1 kN, 2 kN, 5 kN, and 10 kN Force Capacities
The 2712-04x Series grips are ideal for static tensile testing on a wide range of materials and specimen types including plastics, elastomers, metals, textiles, paper, thin sheet, foil, and wire.
Low-Force Grips
50 N and 250 N Force Capacities
The 2712-05x grips are ideal for static tensile testing on a wide range of materials and specimen types including plastics, elastomers, textiles, paper, thin sheets, foil, wire, film, and monofilaments.
For high and low temperature testing requirements, the temperature rated pneumatic grips provide a convenient method for clamping a variety of materials within a temperature controlled environment.
Catalog no. CP122505, CP124893, CP125726, CP126077
Pneumatic action grips clamp the specimen through a dual lever arm, actuated by an air cylinder built into the grip body. Gripping force can be controlled by adjusting the input air pressure and remains constant even if the specimen contracts in the gripped area providing the ultimate in 'follow-up' action. Pneumatic grips can be operated by a foot switch or by grip mounted air-valves (most models) making them quicker and simpler to operate than screw-action grips.
| Force Capacity | Catalog no. |
|---|---|
| 50 N | 2712-051 |
| 250 N | 2712-052 |
| 1 kN | 2712-041 |
| 2 kN | 2712-042 |
| 5 kN | 2712-045 |
| 10 kN | 2712-046 |
Swipe to Spin
Protect Operators from Pinch Hazards
Jaw Face Shields
Protect fingers from pinching hazard between the jaw faces (patent pending).
Adjustable Air Flow Control
The adjustable flow-control valve can be used to slow down the jaw face closing speed to help prevent accidents.
Adjustable Opening
The 1, 2, 5, and 10 kN models feature an adjustable jaw face opening which can be set to the thickness of the specimen.
Easily Change Grips and Jaw Faces Without Any Tools
Unique Lock Nut Design
Designed for easy and comfortable hand-tightening to eliminate backlash. The smaller thread pitch also makes it easier to apply the required pre-load.
Quick Release Air Hose
A rotatable connection allows for tidy hose runs. Quick-connect makes disconnecting air supply quick and simple.
Changes jaw faces in seconds without any tools or pins, and without removing the grips from the testing system.
Designed to Increase Testing Throughput and Repeatability
Alignment Device
The optional specimen alignment device increases repeatability by helping operators load the specimen in the center of the grips.
Wire Alignment
The notch in the jaw face shields makes testing wires quicker and easier.
Self-Centering Design
Easily maintain axiality of loading without adjusting for changes in specimen thickness.
Offsettable Jaw Faces
Available on the 5 kN and 10 kN grips, offsettable jaw faces allow testing of irregular specimens or components (e.g. lap shear).
Precision Specimen Loader
Available for 250 N grips, this optional device improves the alignment and setup process for testing thin films and foils, reducing variability in test results while improving ergonomics and safety.
Specimen Holding Device
The optional specimen holding device allows the operator to close the grips with their fingers out of the test space.
Wide Range of Jaw Faces
Available in rubber-coated, serrated, smooth-ground, brake-lining (HFC), line-contact, wave-profile, and vee-serrated.
用於測量高彈性材料的應變
長行程 （XL） 引伸計設計用於單柱和雙柱萬能試驗系統，可用於測量最大 30 英寸或 750 mm 的試樣伸長率。XL 設計用於快速輕鬆地直接夾持到試樣上。它將調整為從0.5英寸到5英寸或10毫米到200毫米的增量標距長度。
工作原理
高伸長率引伸計設計用於快速輕鬆地直接夾在試樣上。它將調整為從0.5英寸到5英寸或10毫米到200毫米的增量標距長度。XL 可以容納高達 10 in 的夾具位移，並且經過專門設計，允許在不損壞引伸計或以其他方式中斷測試程式的情況下通過破裂測試樣品。XL 引伸計基於一對精心平衡的夾具元件，這些元件通過連接電纜驅動電位計。兩個夾具都可以自由移動，但分離或差分運動的任何增加都會使感測器前進。上下試樣夾具分別進行平衡，並引導在帶有線性軸承的拋光研磨軸上，因此引伸計的重量不會施加到試樣上。
特性和優勢
| 可用型號 | ||
|---|---|---|
貨號 |
相容框架 | 全尺寸行程 |
| 2603-084 | 單列 | 250 毫米 |
| 2603-086 （超長行程） | 單列 | 750 毫米 |
| 2603-080 | 雙柱 | 250 毫米 |
| 2603-085 （超長行程） | 雙柱 | 750 毫米 |
用於金屬和複合材料的靜態和動態測試
先進液壓楔形夾具是一種多功能夾具，可用於靜態和動態材料測試應用——動態測試的力容量高達 500 kN，靜態測試則高達 600 kN。 適用於金屬和複合材料測試，可互換的夾具夾爪面可容納扁平及圓形試樣，且夾具設計對試樣保持恆定的夾持力，無論施加的測試力為何。 只要有足夠且啟用並連接的液壓供應，夾具就會施加這種受控的夾持力。
操作原理
每個夾具獨立運作，外部液壓供應提供壓力以開啟和關閉夾具。 當施加夾持壓力時，試樣/夾爪面的相對垂直位置保持不變，以防止在夾持過程中產生試樣負載。 一旦夾爪面接觸試樣，液壓會在夾具頭上產生垂直力。 夾持力將保持恆定，因為設計會自動補償試樣厚度變化。
應用範圍
添加試樣對準裝置 (型錄編號 CP135054)，以確保您的試樣對準一致。 此裝置與我們的先進液壓楔形夾具的 2743-401、2742-501 和 2742-601 版本相容。
用於靜態應變數
Instron 的靜態軸向夾持式引伸計是一種測量應變的快速簡便的解決方案，適用於各種材料，如塑膠、金屬和複合材料。 我們數十年的應變數經驗幫助我們優化了這些設備的設計，包括：輕巧、堅固的交叉支撐設計，消除了物理變形引起的誤差;內置保護，以減少設備過度伸展造成的損壞;以及設備臂，其設計需要最小的力即可保持與試樣的連接，從而最大限度地減少測試過程中的刀口滑動。所有引伸計均符合 ASTM E83 和 ISO 9513 標準，並附有校準證書，顯示每個裝置在出廠校準時的具體性能。
2630-100 系列
工作原理
2630 系列引伸計可以準確、一致地安裝或安裝到位，標距長度鎖定裝置在安裝後會自動釋放，確保作的速度和可靠性。這種獨特的“錐形閂鎖”機制還克服了在開始測試之前必須移除銷釘或夾子的問題，或者在引伸計意外鎖定在標距長度處的情況下進行測試。
特性和優勢
应用范围
| 可用型號 | ||
|---|---|---|
貨號 |
標距長度（公制） | 行程 （軸向） |
| 2630-120 | 8 毫米 | ±50% |
| 2630-101 | 10 毫米 | ±10% |
| 2630-102 | 10 毫米 | ±50% |
| 2630-105 | 25 毫米 | ±10% |
| 2630-106 | 25 毫米 | +50% |
| 2630-107 | 25 毫米 | +100% |
| 2630-111 | 50 毫米 | ±10% |
| 2630-112 | 50 毫米 | +50% |
| 2630-113 | 50 毫米 | +100% |
| 票價 2630-123 | 75 毫米 | +10% |
| 2630-117 | 80 毫米 | +10% |
| 2630-118 | 80 毫米 | +50% |
| 2630-119 | 100 毫米 | +50% |
貨號 |
標距長度（美國習慣） | 行程 （軸向） |
| 2630-121 | 0.3 英寸 | ±50% |
| 2630-103 | 0.5 英寸 | ±10% |
| 2630-104 | 0.5 英寸 | ±50% |
| 2630-108 | 1.0 英寸 | ±10% |
| 2630-109 | 1.0 英寸 | +50% |
| 2630-110 | 1.0 英寸 | +100% |
| 2630-114 | 2.0 英寸 | ±10% |
| 2630-115 | 2.0 英寸 | +50% |
| 2630-116 | 2.0 英寸 | +100% |
W-6280 系列
用於測試鋼筋和其他棒材
工作原理
這款長標距夾持式引伸計採用獨特的拉開式設計，減少了試樣斷裂過程中損壞的機會，快速連接套件（隨附）可輕鬆安裝在試樣上。由於 W-6280 系列引伸計的框架尺寸較大，因此需要雙手作才能將儀器連接到試樣上，因此這些引伸計仍然依靠銷釘來設置標距長度。
应用范围
| 可用型號 | ||
|---|---|---|
貨號 |
標距長度（公制） | % 行程 （軸向） |
| W-6280-200 | 200 毫米 | +12.5% |
| W-6280-250 | 250 毫米 | +10% |
貨號 |
標距長度（美國習慣） | % 行程 （軸向） |
| W-6280-8 | 8 英寸 | +12.5% |
Lever Action Grips and O-Ring Type
Fibers and filaments tend to be relatively thin materials compared to most, but within these types of materials there can be a wide range of thicknesses and tensile strengths that determines the appropriate gripping method. To properly hold onto these materials, Instron offers two types of grips: a lever action style and an O-ring type.
LEVER ACTION GRIPS
Catalog no. 2711-006
The Lever Action Grips provide the ideal means to hold single fiber specimens. The grips are simple, lightweight, and symmetrical in design.
Principle of Operation
Lever Action Grips are generally used for the thicker range of fiber filament specimens. These grips have an adjustable clamping force, self-aligning hard rubber coated faces, and provide ease of operation similar to a clothes pin. An adapter is provided to use the lower grip in the vertical or horizontal orientation to ease specimen insertion.
Application Range
| Specifications | |
|---|---|
| Capacity | 5 N |
| Specimen Diameter | 2.5 mm |
| Temperature Range | -10 °C to 100 °C |
| Upper and Lower Fittings | Type Om (12 mm connection with 6 mm clevis pin) |
| Misc. | Includes a Type A (hook) for the upper grip |
The O-Ring type of grip is designed to hold very small diameter fiber specimens during tension testing. The rubber v-groove provides a gradually increased frictional hold on the specimen and helps reduce grip face pinching and subsequent specimen jaw breaks. Special considerations are built into the design, where the U-shaped bend provides sufficient area for specimen loading.
Principle of Operation
The O-Ring fiber grip utilizes two rubber o-rings sandwiched between two knurled wheels. These wheels thread on a stud and compress the o-rings to achieve desired gripping force on the specimen.
Application Range
| Specifications | |
|---|---|
| Capacity | 0.825 N |
| Specimen Diameter | 1 to 25 microns |
| Temperature Range | -10 °C to 100 °C |
| Upper and Lower Fittings | Type Om (12 mm connection with 6 mm clevis pin) |
| Misc. | Includes a Type A (hook) for the upper grip |
Featuring adjustable clamping pressure and quick-change jaw faces, these grips can be adapted to test a wide variety of specimens.
The grips can also be positioned at 0, 30, and 90 degrees, making them fully compatible with our non-contacting video extensometer products.
The precision specimen loader improves alignment and the setup process for testing thin films and foils, resulting in reduced variation in test results and improved safety and ergonomics. Available for our 250 N pneumatic side action tensile grips (catalog no. 2712-052), this device uses a detachable alignment clip and linear rail to guide the specimens into the grips. The precision specimen loader is available in multiple sizes to accommodate a wide range of specimen dimensions.
For more information on the importance of specimen alignment for tensile testing of thin films and foils, read our white paper that covers the results of experiments designed to determine the impact specimen alignment has on results.
This extensometer can be attached to round and flat specimens to perform tensile, compression, and cyclic tests in environmental chambers up to 600°C with no cooling required. A quick attach kit for mounting on specimens is included. The device has a low operating force that prevents it from affecting the test.
| Specifications | |
| Gauge Length | 25 mm |
| % Travel (Axial) | +50% / - 8.0% |
| Specimen Size (Round) | Up to 15 mm diameter |
| Specimen Size (Flat) | Up to 50 mm wide for specimens up to 6.35 mm thick Up to 19 mm wide for specimens 6.35 mm to 12.5 mm thick |
| Catalog Number | CP118413 |
2632 Series
High temperature strain gauge extensometers suitable for use up to 1000°C in a resistance furnace. These extensometers are particularly suited to low cycle fatigue, creep, and stress relaxation testing. The extensometer attaches to a specimen using ceramic wrap-around cord (supplied) or by using a spring type attachment (catalog no. 2632-061). These extensometers are compatible with 3117-150, 3117-152, and 3117-200 furnaces.
| Gauge Length | % Travel (Axial) | Chisel and End Rods | Catalog No. |
| 12.5 mm | +20% / -10% | Quartz | 2632-054 |
| 12.5 mm | +20% / -10% | Alumina | 2632-055 |
| 25 mm | +10% / -5% | Quartz | 2632-056 |
| 25 mm | +10% / -5% | Alumina | 2632-057 |
E-Series
The E-Series high temperature extensometer is a self-supporting, side-entry axial strain gauge designed for use in furnaces with a slot for extensometers or with an induction heating system. The device uses a ceramic fiber cords to attach the extensometer to the specimen.
| Gauge Length | % Travel (Axial) | Catalog No. |
| 25 mm | ± 20% | W-E418-25 |
| 50 mm | ± 20% | W-E418-50 |
非接觸式高級影像延伸計
除出色的靜態測試性能外，Instron 高級影像延伸計 (AVE2) 現新增循環測試和高速單調測試測量選項。這款輕巧的非接觸式引伸計設計用於輕鬆跨系統移動，可在實驗室內快速移動，為尋求非接觸試樣研究材料動態行為的科學家、工程師和品質專家提供靈活性。
優化的動態測試能力
通過非接觸式
動態應變控制和測量發現更多
先進的非接觸式解決方案
這種非接觸式引伸計可最大限度地減少測試環境和作員的負面影響，以防止對試樣的過早損壞，從而產生本質上更加一致、準確和可重複的數據。
防衍射氣流系統
一般實驗室環境會受到氣流變化的影響，可能導致高達數微米的誤差。因此，為了最大限度地提高測試精確度，AVE2 使用專利 CDAT 風扇，在試樣和相機之間產生穩定的層流，即使在空調運作期間也能在自由場空間中產生一致的結果。
交叉極化照明系統
不同的實驗室有不同的照明條件，隨著一天時間的推移，同一房間的光線強度也會改變，這種差異可能導致相同類型測試結果的變化。為確保 AVE2 觀察的影像保持一致，Instron 開發了一種專利交叉偏光照明系統，能夠在任何實驗室光線條件下產生可重複的結果。
完全整合的解決方案
該解決方案自信地提供未來許多年所需的結果，還可以適應實驗室不斷變化的需求。與一系列環境室、生物浴、可選鏡頭和附件相容，這些都可以使用我們專有的測試軟體解鎖，因此潛在的測試應用幾乎是無窮無盡的。
革命性的動態功能，
適用於各種迴圈和單調測試
相較於傳統的夾式延伸儀等替代方案，AVE2 提供更高的靈活性和可用性。除了拉伸和壓縮測試外，它還能在各種材料和試樣幾何形狀上進行循環應變的測量和控制。現在您的實驗室只需一台設備就能涵蓋多種規格長度和不同伸長率的測試試樣。
Please
accept marketing-cookies
to watch this video.
高級影像延伸 2 可與一系列
INSTRON 動態和疲勞測試系統配合使用
ElectroPuls® 全電動
動態和疲勞測試系統
通用液壓疲勞系統
資源
工作原理
AutoX750 與 Instron 的 3360、 3380、 3400、5500、 5960、 5980 和 6800 系列 機電測試系統以及 LX、 DX、 HDX 和 KPX 靜態液壓測試系統集成，並通過 USB 介面使用 Bluehill® Universal 測試軟體進行控制。該軟體提供了易於使用的測試序列和設置，有助於在測試前後自動確定標距長度、參考臂位置以及臂的打開和關閉。
平衡測量臂幾乎是無重量的，因此不會對被測材料特性產生任何影響。測量臂由電機驅動，每次都會自動將自身定位到正確的位置和標距長度。
应用范围
AutoX750 的高精度和行程使其成為適合所有材料
（包括金屬、塑膠和複合材料）的理想引伸計。確定各種計算方法，包括模量、偏移屈服、
塑性失效伸長率（非比例）以及鈑金的 r 和 n 值。
對於具有特定對中要求的應用，AlignPRO 系統可用於控制載荷鏈中的同心度和角度，以優化對中。該系統由安裝在稱重感測器和負載框架之間的 AlignPRO 夾具組成，用於調整同心度和角度。AlignPRO 軟體監控安裝在平面或圓形對準單元上的應變片的輸出。然後，這些輸出用於計算由於角度和同心對中誤差引起的彎曲，允許您使用 AlignPRO 夾具進行調整，同時在 AlignPRO 軟體中實時監控對彎曲的影響。
| 規格 | |
| 貨號 | 描述 |
| 2910-130 | 用於 100 kN （22 kip） 機電設備 |
| 2910-132 | 用於 150 和 250 kN（34 和 56 kip）機電設備 |
| 8000-082 | 用於動態機器 - 容量高達 250 kN （56 kip） |
| 8000-084 | 用於動態機器 - 容量高達 500 kN （112 kip） |
| 規格 | |
| 貨號 | 描述 |
| 8000-171 | 應變片對中單元，8 個片片，片寬截面直徑 8 mm |
| 8000-172 | 應變片式對中單元，8 個量規，片寬截面直徑 10 mm |
| 8000-173 | 應變規對準池，8 個規，扁平 12 mm x 6 mm 規段 |
| 8000-174 | 應變規對準單元，8 個儀錶。薄扁平 15 mm x 2 mm 測量截面 |
With a Patented Self-Centering Mechanical Synchronizer
Instron hydraulic side acting grips provide an innovative solution for high-capacity testing and deliver enhanced gripping performance, usability, and operator safety over traditional grip designs. These advanced grips maintain a constant clamping force on the specimen that acts perpendicular to the direction of testing and is independent of tensile loading.
Instron’s dual side-acting grips incorporate our latest DuraSync technology. This patented self-centering mechanical synchronizer provides many improvements over hydraulic or mechanical rack and pinion designs commonly found in the marketplace.
Features
Application Range
| Specifications | ||||||
|---|---|---|---|---|---|---|
| Catalog no. | Force Capacity | Operation | Specimen Range | |||
| Rounds | Flats | Cable | ||||
| W-5450 | 250 kN | Dual Side-Acting | Standard | 3 - 60 mm | 0 - 60 mm | - |
| W-5400 | 600 kN | Single Side-Acting | Standard | 3 - 57 mm | 0 - 75 mm | - |
| W-5410 | 600 kN | Dual Side-Acting | Standard | 3 - 60 mm | 0 - 100 mm | - |
| W-5420 | 600 kN | Dual Side-Acting | Premium Premium Model The premium grips can be configured for testing standard flat, round, wire strand, and cable specimens. This model can also be configured for thru-zero (negative load) testing, provided the load frame is capable of thru-zero (cyclic) loading. |
3 - 60 mm Thru-Zero Specimen Range: 3 - 60 mm | 0 - 100 mm Thru-Zero Specimen Range: 0 - 75 mm | 4.8 - 25.4 mm |
| W-5460 | 1000 kN | Dual Side-Acting | Premium Premium Model The premium grips can be configured for testing standard flat, round, wire strand, and cable specimens. This model can also be configured for thru-zero (negative load) testing, provided the load frame is capable of thru-zero (cyclic) loading. |
3 - 85 mm | 0 - 120 mm | 4.8 - 25.4 mm |
| W-5430 | 1500 kN | Dual Side-Acting | Premium Premium Model The premium grips can be configured for testing standard flat, round, wire strand, and cable specimens. This model can also be configured for thru-zero (negative load) testing, provided the load frame is capable of thru-zero (cyclic) loading. |
3 - 85 mm Thru-Zero Specimen Range: 3 - 85 mm | 0 - 120 mm Thru-Zero Specimen Range: 0 - 85 mm | 4.8 - 25.4 mm |
| W-5440 | 2000 kN | Dual Side-Acting | Premium Premium Model The premium grips can be configured for testing standard flat, round, wire strand, and cable specimens. This model can also be configured for thru-zero (negative load) testing, provided the load frame is capable of thru-zero (cyclic) loading. |
3 - 100 mm Thru-Zero Specimen Range: 3 - 85 mm | 0 - 120 mm Thru-Zero Specimen Range: 0 - 85 mm | 4.8 - 25.4 mm |
氣動夾具用之氣源套件
可選配氣動套件、腳踏開關或分配套件，以提升夾具操作便利性與工作效率。
液壓夾具泵浦
Instron 的液壓夾具泵浦旨在為高容量測試應用提供精確可靠的夾緊力，支持高達 600 kN 的負載能力。
Loadframe 支撐台/底座
可以將測試框架台或底座添加到地板和檯面模型系統中，為您的操作者帶來更符合人體工程學的高度。
碎片防護罩
防護罩用於隔離測試區與操作人員，對於如複材、鋼筋、纜線等易於劇烈破裂的材料測試，為必要的安全配備。
當今的測試實驗室和製造商有各種各樣的材料和元件測試需求。為了滿足這些不同的要求，Instron 擁有不同的儀器配置，以確保為測試應用提供正確的解決方案。
PC 硬體
使用電腦的系統需搭配電子介面。若系統採用 GPIB 通訊，則電腦需配備相容的 通訊卡。
For Tensile Testing on a Wide Range of Materials and Specimen Types
Screw action grips provide a very simple and efficient method for holding test specimens in a wide range of applications. The dual-acting design means that jaw faces can be adjusted to accommodate different specimen thicknesses, this ensures that the line of tensile force remains concentric with the grip body. They can be equipped with a selection of interchangeable grip jaw faces in various sizes and choice of surfaces including smooth ground, rubber-coated, and serrated.
2710-100 Series | 100 N - 10 kN Force Capacities
The 2710-100 Series dual-acting screw design accommodates specimens up to 46 mm (1.8 in) thick and can be offset for irregular or asymmetrical specimens such as lap-shear types and component testing. Screw knobs on either side are knurled to facilitate hand tightening and the higher capacities also feature hex socket screw knobs that accommodate a hex key or torque wrench. Engraved scales on the carriages aid in centering the planes of gripping.
| Force Capacity | Catalog no. |
|---|---|
| 100 N | 2710-111 |
| 500 N | 2710-112 |
| 1 kN | 2710-113 |
| 2 kN | 2710-114 |
| 5 kN | 2710-115 |
| 10 kN | 2710-116 |
Advanced Screw Side Action Grips
Quick Change Jaw Faces
The quick change jaw face design allows all jaw faces to be changed single-handedly in seconds without the use of tools or pins.
Designed to Ease Alignment
Carriages with engraved scales ease alignment of specimens to the axis of testing. Self-aligning jaw faces compensate for specimen irregularities. Optional specimen alignment devices increases repeatability by helping operators load the specimen in the center of the grips.
Versatile
Wide opening suitable for a wide range of specimen thicknesses and unique components. Large space between the jaw faces and the grip body eases specimen insertion.
Wide Range of Jaw Faces
Available in rubber-coated, serrated, smooth-ground, brake-lining (HFC), line-contact, wave-profile, and vee-serrated.
OTHER MODELS
Mid-Range and Low-Force Grips
Basic Mid-Range Grips
2710-200 Series | 1 kN - 5 kN Force Capacities
2710-200 Series screw side action grips are designed for basic mid-force-range static tensile testing on a wide range of materials.
Basic Low-Force Grips
2710-004 | 500 N Force Capacity
2710-004 screw side action grips are designed for basic static tensile testing for low-force applications.
For Tensile Testing on a Wide Range of Materials and Specimen Types
The manual wedge action grip is designed for easy specimen loading, alignment, and positioning. After initial specimen contact, gripping force increases as the testing load increases. Virtually no preload is seen during specimen clamping due to the design of the moving grip bodies, making them particularly suitable for testing high strength materials, such as metals and composites, ensuring that specimen slippage is eliminated.
1 kN - 150 kN Force Capacities
Low-Force Grips
1 kN - 50 kN Force Capacities
The low-force 2716 Series wedge grips are ideal for static tensile testing on a wide range of materials including plastics, elastomers, and metals.
High-Force Grips
100 kN and 150 kN Force Capacities
The high-force range of 2716 Series wedge grips are ideal for static tensile testing on metal and composite material.
Principle of Operation
The wedge action principle of these grips allows them to be tightened onto a specimen without altering the vertical position of the faces in relation to the specimen. This is accomplished by a design, which moves the grip body to close the faces. This feature makes it possible to pre-select the exact point at which the specimen will be held with consistent gauge length and no compressive force applied which may cause specimen buckling.
A strong clamping force can be applied to materials that are difficult to hold through a high mechanical advantage achieved by the tightening mechanism. The grip faces are spring loaded against a shoe which is in a fixed position in respect to the testing frame holding mechanism, only a light initial gripping force needs to be applied to the specimen. As the grip is tightened, it's frame is drawn up and the inclined sides push against the matching side of the faces which move laterally against the specimen. A shoe incorporated to the driving shaft prevents the faces from moving.
The open front design of the grip frames allows faces to be easily interchanged as well as easy specimen loading. Because the faces are held in fixed position, there is no recoil, or loosening, when the specimen ruptures and if an extensometer is attached, it will remain in place.
Features
Application Range
| Available Models | ||
|---|---|---|
| Force Capacity | Maximum Specimen Width | Catalog no. |
| 1 kN | 19 mm | 2716-016 |
| 2 kN | 19 mm | 2716-017 |
| 5 kN | 25 mm | 2716-010 |
| 30 kN | 25 mm | 2716-015 |
| 30 kN [High Temperature] | 25 mm | 2736-015 |
| 50 kN | 25 mm | 2716-020 |
| 100 kN | 25 mm | 2716-002 |
| 100 kN | 50 mm | 2716-003 |
| 100 kN [High Temperature] | 25 mm | 2736-004 |
| 100 kN [High Temperature] | 50 mm | 2736-005 |
| 150 kN | 50 mm | 2716-008 |
OTHER MODELS
For High Force Testing
Precision Mechanical Wedge Grips
100 kN and 250 kN Force Capacities
Catalog nos. 2716-028 and 2716-030
Tensile grips for composites and metal that provides accurate and repeatable specimen alignment capable of meeting the alignment requirements of Nadcap AC7122-1 and AC7101.
High Capacity Wedge Action Tensile Grips
300 kN Force Capacity
Catalog no. CP130950
Manual wedge grips are designed to provide a high-capacity gripping solution without the need for pneumatic or hydraulic actuation.
For Tensile Testing Thin Sheets, Films, Flexible Plastics, Rubber, and Elastomers
The self-tightening grips are primarily designed for the precision testing of elastomeric and other flexible materials exhibiting a large reduction in cross-section area under load. They provide excellent testing accuracy, positive non-slip gripping action and are quick and simple to use. The upper grip is counter balanced so that the specimen can be aligned with the load cell to eliminate non-axial forces.
1 kN - 5 kN Force Capacities
1-kN-Modell | 2713-007
2-kN-Modell | 2713-004
5-kN-Modell | 2713-002
The self tightening grip uses an eccentric roller type clamping action. A single fast action lever reduces the time required to load specimens. Specimen insertion is extremely easy and the spring pressures of the roller bracket gives a positive non-slip action gripping force. This is sufficient to hold the material until a load is applied. The follow up action of the roller while under test prevents the specimen from slipping out of the grip as the load increases.
Specimen Loading: 1 kN Grips
Specimen Loading: 2 kN Grips
| Specifications | |||
|---|---|---|---|
| Catalog no. | 2713-007 | 2713-004 | 2713-002 |
| Force Capacity | 1 kN | 2 kN | 5 kN |
| Maximum Specimen Width | 43 mm | 28 mm | 28 mm |
| Temperature Range | -70 °C to 150 °C | -70 °C to 315 °C | -70 °C to 315 °C |
| View Full Specifications | Download Brochure | Download Brochure | Download Brochure |
Self-Tightening Eccentric Roller Grips
Fast action for rapid specimen insertion to increase testing throughput.
Positive, non-slip gripping action for accurate results.
Eccentric roller type clamping action increases clamping force with applied force.
Designed for use in -70° C to 315° C (-94° F to 600° F) temperature ranges.
Low-Force Grips
2713-006 Series | 100 N Force Capacity
These grips are ideal for tensile testing natural rubber latex, elastomers, paper, and polymer films.
2620 系列動態應變片引伸計是精確的輕型裝置，用於在各種靜態和高頻迴圈材料測試應用中對應變進行直接測量和閉環控制。2620 系列動態應變片引伸計可按照廣泛的國家和國際標準進行拉伸、壓縮、低周和高周疲勞測試、蠕變和應力鬆弛以及直線（斜坡）測試。
2620 系列引伸計設計用於金屬、複合材料、塑膠、木材和其他總應變高達原始標距長度 ±50% 的材料。它們可浸入各種流體（丙酮、礦物油和矽油、酒精和類似的冷卻/加熱流體）中，並且可以快速輕鬆地進行校準。
| 項目名稱 | 軌距長度 | % 行程 （軸向） | 貓# |
| 動態引伸計 12.5mm GL ±5mm 行程 | 12.5 ;25 和 50 mm | ±40、±20 和 ±10% | 2620-601 |
| 動態引伸計 12.5mm GL ±2.5mm 行程 | 12.5;25 和 50 mm | ±20、±10 和 ±5% | 2620-602 |
| 動態引伸計 10mm GL ±1mm 行程 | 10、25 和 50 mm | ±10、±4 和 ±2% | 2620-603 |
| 動態引伸計 25mm GL +12.5mm -2.5mm 行程 | 25 和 50 mm | +50 à -10 和 +25 à -5% | 2620-604 |
For Testing High Strength Textile Materials
Webbing capstan grips are designed to permit faster, easier testing of seat belts and other high strength belts and tapes. Based on the capstan principle, these grips minimize slippage and jaw breakage effects, and permit the predetermination of specimen length while allowing for quick, convenient loading.
These webbing capstan grips incorporate an ingenious double capstan design which provides fast, easy loading with a gripping action that results in proper breaks in the full gauge length of the specimen. The key to the ease of loading is the use of an inner and outer capstan. The specimen is loaded simply by inserting one end into the groove of the inner capstan and cranking it through 360 degrees. Gripping efficiency is also greatly increased because the surfaces of both capstans are utilized.
| Specifications | |
|---|---|
| Catalog no. | 2715-003 |
| Capacity | 50 kN |
| Standards | ASTM D6775, D3950 |
| Maximum Specimen Width | 50.8 mm |
| Maximum Specimen Thickness | 4.75 mm |
| Temperature Range | -29 °C to 121 °C |
| Upper and Lower Fittings | Type Dm (1.25 in connection with 1/2 in clevis pin). Rigid coupling required. |
| Brochure | Download |
Translation and clamping stages are used to precisely position and align a test specimen below the actuator. These are commonly used for securely positioning microelectronic circuit boards and components within the testing system.
用於測試纖維、線繩、紗線和細編織線
氣動線繩和紗線夾具為夾緊纖維、線繩、紗線和細編織線提供了一種便捷的方法以減少與測試這些材料相關的鉗口斷裂問題。 特別設計的夾具具有光滑的表面和漸進式凸輪的輪廓表面，可輕鬆裝載並減少試樣夾持區域的應力。夾持機構可透過自動或腳踏開關啟動。這允許免手操作夾具，使操作者能夠用雙手握持試樣以便於裝載。氣動繩索和紗線夾具提供可選擇的夾持力，以適應不同材料，並具有出色的跟隨動作，可補償因試樣蠕變而導致的夾持力衰減。
當單絲、線繩和紗線的夾持區域相對於強度較小時，使用標準夾持面的常規技術通常會導致與鉗面相鄰的試樣失效。氣動線繩和紗線夾具是專門為克服試樣失效問題而設計的，它採用了絞盤設計，通過摩擦將夾持力均勻地分佈在彎曲的半絞盤表面上。
此外，施加到試樣末端的氣動緩衝夾持力補償了由於試樣蠕變引起的力衰減。氣動裝置啟動一個可移動的面，該面作用在輪廓固定的夾持面上。它用作絞盤併為試樣提供支撐，使試樣的自由應力長度逐漸過渡到剛性夾緊部分，而不是突然過渡，從而最大限度地減少試樣與鉗面相鄰的破損。絞盤還包含一個拋光的導角，有助於快速載入試樣。拋光表面可防止在試樣插入過程中損壞單根纖維。
將試樣放在幅桿的頂部，並向下滑動到輪廓夾具上的適當夾持位置。夾具可以通過氣動腳踏開關關閉或打開，以實現免持操作。自動空氣套件也可用於通過軟體或系統預設設置進行免持操作、自動化和預拉伸測試。
Dynacell 是世界上第一款真正的動態荷重感測器，從一開始就為測量動態荷載而設計。Dynacell 在荷重感測器的中心直接使用加速度計，直接位於負載軸上。這消除了因偏心荷載而導致的加速度讀數錯誤的風險。
2527 系列雙軸 Dynacell 荷重感測器
2527 系列稱荷感測器設計用於動態測試系統;提供卓越的性能，能夠測量低至 1/250 ，精度為讀數的 0.5%。
2527 系列 Dynacell 荷重感測器
Dynacell 是一種獨特的負載測量設備，可自動補償由負載鏈元件的慣性引起的負載誤差。動態慣性補償方法
對於所有形式的動態測試都是必不可少的。
用于测试部件和结构件
T 型槽平台为电子万能试验机提供了扩展的工作区域，使得用户在进行拉伸、压缩和弯曲测试时，能够更方便地固定部件及结构件。T 型槽平台直接安装在机器底座上，并配备了 T 型槽，该槽可提供样品前后、左右及斜对角线安装方向。然后就可以使用所附的各种夹具将部件和结构件固定在平台的适当位置。借助这种设计，您可以使用标准的 Instron 夹具、测试工装和其他主要配件，无需从机架中移除 T 型槽平台。
T 型槽平台使用户能够使用非标的夹具固定在电子万能试验机上。外购的 T 型槽螺母可先滑入平台的倒 T 型槽。然后可将螺栓、螺柱或螺杆旋拧到螺母中。T 型槽平台可用于固定试样，否则在受力情况下可能会滑出实验区域。
T 型槽平台也可用于将试样放置在同一位置，以实现重复测试和批量测试。可将导轨、滑块或止动器放置在平台上，并用螺栓固定在相应位置，以便在每次测试中精确放置试样。
| 规格 | ||||
|---|---|---|---|---|
| 目录编号 | 最大载荷容量 | 兼容机架 | 宽度 | 深度 |
| CP103964 | 5 kN | 3340、4440、5540、5840、5940、34SC、68SC 单立柱系统 | 200 毫米 | 160 毫米 |
| 2850-206 | 50 kN | 3360 台式试验系统 | 400 毫米 | 500 毫米 |
| 2850-205 | 50 kN | 4460、5560、5860、5960、34TM、68TM 台式试验系统 | 400 毫米 | 500 毫米 |
| 2850-203 | 300 kN | 3382、3384、3385H、34FM-100、34FM-300、4481、4482、4484、4485、5581、5582、5584、5585、5585H、5881、5882、5884、5885、5885H、5982、5984、5985、68FM-100、68FM-300 | 550 毫米 | 500 毫米 |
| 2850-202 | 600 kN | 载荷超过250kN的4400、5500、5800、5900 落地式试验系统 | 640 毫米 | 640 毫米 |
This composite tensile grip guide provides an overview of key specifications for tensile grips that are ideally suited for testing composite materials. For a detailed look at the requirements and important issues related to gripping composite laminate coupons, read our Composites Gripping Guide White Paper.
| Manual Wedge Action Grips | |
| Grip Type | Moving body wedge |
| Static Capacity | 100 kN, 150 kN |
| Operation | Manual |
| Interchangeable | Yes |
| Temperature Range | -70° to 315° C |
| Can You Attach Fixtures Without Removing Grips? Some grips can be outfitted with adaptors to attach other fixtures - offering the flexibility to perform other tests without needing to remove the grips. This is referred to as piggybacking. |
No |
| Nadcap Alignment | No |
| Catalog Numbers | 2716-002, 2716-003, 2716-008, 2736-004, 2736-005 |
| Precision Manual Wedge Grips | |
| Grip Type | Moving body wedge |
| Static Capacity | 100 kN, 250 kN |
| Operation | Manual |
| Interchangeable | Possible (not easy) |
| Temperature Range | -80° to 250° C |
| Can You Attach Fixtures Without Removing Grips?  Some grips can be outfitted with adaptors to attach other fixtures - offering the flexibility to perform other tests without needing to remove the grips. This is referred to as piggybacking. |
Yes |
| Nadcap Alignment | Yes |
| Catalog Numbers | 2716-028, 2716-030 |
| Hydraulic Wedge Action Grips | |
| Grip Type | Moving body wedge |
| Static Capacity | 130 kN, 312 kN, 600 kN |
| Operation | Hydraulic |
| Interchangeable | No |
| Temperature Range | Ambient only |
| Can You Attach Fixtures Without Removing Grips?  Some grips can be outfitted with adaptors to attach other fixtures - offering the flexibility to perform other tests without needing to remove the grips. This is referred to as piggybacking. |
Yes |
| Nadcap Alignment | Yes |
| Catalog Numbers | 2743-401, 2742-501, 2742-601 |
| Extended Hydraulic Wedge Grips | |
| Grip Type | Extended moving body wedge |
| Static Capacity | 130 kN, 312 kN |
| Operation | Hydraulic |
| Interchangeable | No |
| Temperature Range | -70° to 350° C |
| Can You Attach Fixtures Without Removing Grips?  Some grips can be outfitted with adaptors to attach other fixtures - offering the flexibility to perform other tests without needing to remove the grips. This is referred to as piggybacking. |
Yes |
| Nadcap Alignment | Yes |
| Catalog Numbers | CP104947, CP109120 |
Hammer weights and attachment hardware for use with MPX Series frames of equal or greater capacity.
| Description | Catalog No. |
| 300J Hammer Weight | W-3576-A |
| 450J Hammer Weight | W-3576-B |
| 600J Hammer Weight | W-3576-C |
| 750J Hammer Weight | W-3576-D |
Catalog No. W-3577
Kit includes a chain hoist with a capacity of up to 500 kgf (1100 lbf) and a frame mounting bracket to suspend the hoist from an MPX Series pendulum impact machine. This kit is used to easily lift and securely support the hammer weights during weight changes, or the pendulum hammer assembly when replacing the striker, anvils, or other wear components.
Catalog No. W-3598
The Charpy specimen loader device attaches to the MPX frame and uses a manually operated pivoting arm to place individual specimens on the anvil for ambient testing. The arm must be moved away for the door to close and the test to be performed. Kit includes the specimen loader assembly and mounting hardware.
Tongs for handling and centering ambient and low-temperature Charpy and Izod specimens.
| Description | Catalog No. |
| Charpy Tongs | W-3550 |
| Izod Tongs | W-3587-D |
Charpy test kits include a Charpy impact striker, Charpy anvil inserts, and shrouds. These are for use on SI and MPX Series pendulum impact testing systems.
| Description | Catalog No. |
| Charpy Test Kit for ISO 148-2:2009 Includes: Charpy impact striker (2 mm Radius), and Charpy anvil inserts (1 mm radius), and shrouds |
W-3599-A |
| Charpy Test Kit for ASTM E23-12C (also complies with ISO 148-2:2009) Includes Charpy impact striker (8 mm radius), and Charpy anvil inserts (1 mm radius), and shrouds |
W-3599-B |
Catalog No. W-3587-C
Izod test conversion kit includes the components required to convert an MPX and SI Series pendulum impact tester to conduct an Izod test. Included are tongs for specimen handling, a magnetic specimen retrieval device and other necessary tooling. An Izod striker is not included.
Additional or spare Charpy impact strikers can be provided for testing with either a 2 or 8 mm radius.
| Description | Catalog No. |
| Charpy Impact Striker (2 mm radius) for ISO 148-2:2009 | W-3599-C |
| Charpy Impact Striker (8 mm radius) for ASTM E23-12C (also complies with ISO 148-2:2009) | W-3599-D |
Catalog No. W-3587-A
Izod impact striker for machine capacities 240 ft-lbf (325.4 joule) and greater.
Charpy specimen support sets are for use with SI and MPX Series pendulum impact testing systems and are compliant with ASTM E23-12C and ISO 148-1:2009.
| Description | Catalog No. |
| Standard (10 mm x 10 mm) Charpy Specimen Support Set | W-3585 |
| Subsize (7.5 mm x 10 mm Charpy Specimen Support Set (Set of 2) | W-3596 |
| Subsize (5.0 mm x 10 mm Charpy Specimen Support Set (Set of 2) | W-3595 |
| Subsize (2.5 mm x 10 mm Charpy Specimen Support Set | W-3594 |
FTS Charpy Specimen Cooling Bath includes Charpy rack that holds up to 65 specimens and exceeds ASTM E23 / ISO 148 temperature stability requirements.
Note: Performance specifications are based on SP Scientific test data from units using methanol and operating at an ambient room temperature of approximately 22 C (72 F). Higher ambient temperatures and/or different fluids may interfere in the system's ability to achieve its ultimate low temperature.
| Description | Catalog No. |
| 220 V Cooling Bath (50 Hz, 6 AMP) | W-3609-A |
| 120 V Cooling Bath (60 Hz, 12 AMP) | W-3609-B |
Catalog No. W-3558
A centering gauge for positioning Charpy anvil and pendulum.
Catalog No. W-3561
A lateral expansion gauge for impact testing in accordance with ASTM A370.
用於在非常溫下進行測試
3119-600 系列環境試驗箱與靜態和動態試驗機相容，提供廣泛的溫度測試功能，用於評估非環境條件下的材料性能。 試驗箱有多種標準尺寸可供選擇，並且可以固定到機器上或安裝在滾輪支架上。 如果需要，它們也可以通過客製化安裝件安裝到其他品牌的試驗機上。 此外，如果您的應用需求超出我們標準試驗箱、夾具和配件的規格，Instron 可以客製化完整的解決方案，包括荷重串組件。
Instron 環境試驗箱採用強制對流原理，使熱空氣或冷空氣在試樣、夾具和拉桿周圍循環，以提供最佳的加熱/冷卻速率、減少熱梯度並實現良好的熱穩定性。 環境溫度空氣也從試驗箱後部進入絕緣層和外板之間的空間。 這有助於保持試驗箱外殼的冷卻。 可選擇的高/低風扇速度允許通過降低試驗箱內空氣湍流的影響來測試精密的試樣。
加熱是通過使空氣流過電加熱元件來實現的。 該系列中的所有試驗箱均標配加熱功能。 冷卻是通過可選的冷卻閥將低溫氣體（CO2 或 LN2）吹入試驗箱來實現的。 低溫氣體通常儲存在鋼瓶（液態 CO2）或自增壓杜瓦瓶（液態 N2）中。 廢棄的低溫氣體通過專用埠排放到試驗箱後部，該埠可以連接矽橡膠管並排放到實驗室環境之外。
通過左側的鉸鏈門可以接觸到試樣和夾具，該門還包含一個加熱的光學玻璃窗。 如果需要，內部照明燈可以清晰地看到試驗箱內部。 當門打開時，試驗箱會自動關閉加熱、冷卻和風扇，從而減少到達操作員的熱/冷空氣。
安裝在試驗箱上的專用 Eurotherm 3208 溫度控制器用於選擇所需的設定點溫度。 溫度由試驗箱內的 N 型熱電偶監控和控制。 控制器可以設定加熱速率和停留時間（8個段落），並可透過 USB 使用相容的 Instron 軟體與 PC 進行通訊。 它還具有 0-10V 的類比溫度輸出，供其他設備（如圖表記錄器）使用。
3119-600 系列環境試驗箱與各種夾具、治具、延伸計和推/拉杆相容，可為需要非環境測試條件的各種測試應用提供可靠和持久的性能。
| 貨號 | 溫度 額定值 達到低於環境水平的溫度所需的冷卻選項。 |
內部 尺寸 深度 x 寬度 x 高度 |
外部 尺寸 寬 x 高 |
|---|---|---|---|
| 3119-605 | -100 °C 至 350 °C | 230 x 240 x 485mm | 350 x 635 mm |
| 3119-606 | -100 °C 至 350 °C | 230 x 240 x 560 mm | 350 x 710mm |
| 3119-609 | -100 °C 至 350 °C | 230 x 240 x 660 mm | 350 x 810 mm |
| 3119-615 | -100 °C 至 350 °C | 230 x 240 x 860 mm | 350 x 1010 mm |
| 目錄 數 |
溫度 額定值 需要冷卻選項才能達到低於環境溫度的溫度。 |
內部 尺寸 深度 x 寬度 x 高度 |
外部 尺寸 寬度 x 高度 |
|---|---|---|---|
| 3119-607 | -150 °C 至 350 °C | 400 x 400 x 560 mm | 550 x 710 mm |
| 3119-608 | -150 °C 至 600 °C | 400 x 400 x 560 mm | 550 x 710 mm |
| 3119-610 | -150 °C 至 350 °C | 400 x 400 x 660 mm | 550 x 810 mm |
| 3119-616 | -80 °C 至 350 °C | 400 x 400 x 900 mm | 550 x 1050 mm |
| 3119-617 | -80 °C 至 350 °C | 400 x 400 x 760 mm | 550 x 910 mm |
| 3119-618 | -80 °C 至 350 °C | 400 x 400 x 1000 mm | 550 x 1050 mm |
對於那些需要超出標準暗箱功能的測試應用，我們的工程解決方案小組可以設計專門的環境暗箱以滿足您的需求，包括更高或更寬的暗箱、具有更高額定溫度的暗箱以及定製的載荷鏈元件，例如夾具和固定裝置。
Catalog no. 2715-001
Cord capstan grips are designed to permit faster, easier testing of twisted or braided cords. These grips are designed to permit predetermination of specimen length, and allow quick, convenient loading.
Principle of Operation
Cord capstan grips provide a superior method for clamping twisted or braided cord during testing. Each grip has a round capstan with a right-hand spiral grooved surface that accommodates specimens up to 3.2 mm (0.125 in) in diameter. The capstan is split axially into two halves, one half being stationary and the other movable. The specimen is wound from the outside of the capstan towards the center before being passed through the split halves where it is clamped. The groove completes 2.5 turns around the capstan, which allows two full turns for distributing the specimen load and stress concentration. The grips self tighten as load is applied to the specimen.
Smooth capstan surfaces are available separately.
Application Range
| Specifications | |
|---|---|
| Catalog no. | 2715-001 |
| Force Capacity | 2.5 kN |
| Maximum Specimen Diameter | 3.2 mm |
| Temperature Range | -73 °C to 316 °C |
| View Full Specifications | Download Brochure |
Split insert tensile grips are designed for safe, high-volume production testing of threaded-end, shoulder-end, or button-end machined specimens. Engineered with an operator focus, the split insert style tensile grips are easy to install, offer quick change inserts for standard specimen sizes, and promote efficient static testing of a wide range of metals and alloys. A preferred solution for the testing of high-strength, high-toughness materials that may damage or cause excessive wear to traditional grip arrangements. These grips are designed to comply with ASTM E8, ASTM A370, or ASTM A48, and other international standards, and can be made to custom specifications. A wide range of possible button-end, shank hole, and chamfer / radius dimension options ensures compatibility with a large variety of specimen sizes.
Debris shields, also known as protective shields, provide a protective barrier between the test space and the operator. These may be necessary for materials that exhibit violent failures under test, such as composites, rebar, and cables.
These debris shields feature an anodized extruded aluminum frame and clear Lexan® panels that offer unobstructed views of the text space. A hinged-style access door is available with or without door safety interlocks.
| Compatible Frames | Catalog Number |
| Single Columns | 500 N Systems: 334X, 34SC, 594X, 68SC |
CP127700 |
| Single Columns | 1 - 5 kN Systems | Standard Height: 334X, 34SC, 594X, 68SC |
CP127701 |
| Single Columns | 5 kN Systems| Extra Height: 3345, 34SC-5, 68SC-5 |
CP127702 |
| Table Models | Standard Width: 336X (dual T-slot column cover style only), 34TM, 446X, 556X, 586X, 596X, 68TM |
2910-074 |
| Floor Models: 3382, 3384, 3385H, 34FM, 4481, 4482, 4484, 4485, 5581, 5582, 5584, 5585, 5585H, 5881, 5882, 5884, 5885, 5885H, 5982, 5984, 5985, 5985, 68FM |
2910-062 |
Depending on user-preference and footprint limitations, a sliding debris shield is available for table model universal testing systems. The sheet metal and polycarbonate shield encase the front of the test machine, separating the user from debris and moving parts while also giving excellent visibility. To access the test space, the sliding door is opened to the left and specimens and grips can be loaded through the 845mm tall and 440mm wide port. The debris shield can be equipped with an optional magnetic interlock which prevents tests from being started with the door open and can be configured to prevent all crosshead motion when the door is open.
| Compatible Frames | Catalog Number |
| 68TM, 34TM, 336X, 596X | Standard Height, Standard Width | CP129040 |
| 68TM | Extra Height, Standard Width | CP129044 |
| 34TM, 336X, 596X | Extra Height, Standard Width | CP126003 |
| 336X, 596X | Standard Height, Standard Width | CP126002 |
For Testing End Products and Components
The Component Test Plate is a drilled and tapped metal plate that can be mounted directly to the base of single and dual column test frames. The entire surface is covered in an array of M6 threaded holes that can be used for a variety of purposes, including mounting components or end products to the plate for tensile, compression, bend, peel, or puncture testing. The plate also allows you to mount grips off-center and makes it easier adapt custom-made grips and fixtures to your test system.
Principle of Operation
Components or end products can be mounted directly to the component test plate with compatible M6 hardware or machinist vices. The location of the specimen on the plate should be selected such that the area of interest, where the load application occurs, is completely centered. If the load application is off-center it could potentially damage the load cell.
The component test plate is also compatible with Instron standard base adapters (type O and D) which can be mounted to the plate using any of the M6 threaded holes – allowing you to place a grip off-center or adapt a custom-made grip or fixture to the test frame.
Application Range
| Specifications | ||||
|---|---|---|---|---|
| Catalog no. | Compatible Frames | Capacity | Width | Depth |
| 2910-108 | Single Column Systems 68SC |
1 kN | 600 mm | 300 mm |
| 2910-107 | Dual Column Systems 68TM, 34TM, 596x, 336x, 556x, 556xA, 446x |
2 kN | 300 mm | 300 mm |
| 2910-106 | Single Column Systems 334x |
1 kN | 600 mm | 300 mm |
| 2910-105 | Single Column Systems 34SC, 594x, 554x |
1 kN | 600 mm | 300 mm |
| CP129729 | Extra Wide Dual Column Systems 68TM-30 |
30 kN | 914 mm | 610 mm |
| CP129738 | Dual Column Systems 68TM, 34TM, 596x, 336x, 556x, 556xA, 446x |
30 kN | 400 mm | 400 mm |
Pneumatic Wedge Grips for Fatigue Testing
Instron pneumatic wedge action grips may be used in static or dynamic materials testing applications, interchangeable wedge-shape grip faces accommodating either flat or round specimens.
The grip is designed to allow test specimens to be securely gripped without introducing axial pre-loading to the specimen. This is achieved by using jaw faces that move in a horizontal direction only, relative to the specimen.
Each grip functions independently of the other, an external hydraulic supply providing pressure to both open and close the grips.
When gripping pressure is applied, the relative vertical position of the specimen/jaw faces remains unchanged to prevent specimen load generation during the gripping process.
Once the grip faces contact the specimen the hydraulic pressure produces a vertical force on the grip head. The grip force will remain constant as the design automatically compensates for specimen thickness changes.
Units
| Item Name | Cat# |
|---|---|
| 2742-103 ±1 kN Pneumatic Fatigue Grips | 2742-103 |
| 2742-205 ±3 kN, ±25 Nm Pneumatic Fatigue Grips | 2742-205 |
| 2742-315 ±10 kN ±100 Nm Pneumatic Fatigue Grips | 2742-315 |
Clevis Grips for Fracture Mechanics
Units
| Item Name | Capacity | Specimen Width | Cat# |
|---|---|---|---|
| Compact Tension Fixtures for 50mm wide Compact Tension Specimens | ±250 dynamic, 500 static kN | 50 mm | 2750-120 |
| High Temperature Clevis Grips | 0.8 @ 1000 deg.C kN | 12.5 mm | 2420C |
| Compact Tension Fixtures for 12.5mm Thick Compact Tension Specimens | ±10 dynamic, 20 static kN | 12.5 mm | 2780-118 |
| Compact Tension Fixtures for 25mm Thick Compact Tension Specimens | ±50 dynamic, 100 static kN | 25 mm | 2780-119 |
| Additional Extension Rod | 2780 120 |
Pneumatic Wedge Action Grips
Pneumatic wedge action grips feature an open front design, which facilitates easy loading of large specimens. This series can accommodate round specimens up to 60 mm (2.36 in) in diameter and flat specimens up to 70 mm (2.75 in) thick. The compact design of these pneumatic wedge grips provides optimum use of the test area when installed on Instron’s floor model testing systems.
Specially suited for industrial environments where dust and metal chips may be present, these grips have protective dust covers that fit easily over the faces to shield the moving surfaces. Optional piggyback adapter plate furnishes an efficient method for mounting secondary load strings for lower capacity testing without removing the larger grip.
On the 2716-110 and 2716-120 Grips, the vee faces used for round specimens by design have a reduced area at the center, which compromises their ability to absorb high energy breaks without fracture. This grip uses a split-vee face configuration which allows the break energy to be dissipated without damaging the faces. On the W-5180 and W-5190 Grips, the considerable increase in size allows the use of a one-piece design grip face.
These grips are operated with a control knob mounted on the grip or with an Instron standard pneumatic control kit. Powered by pneumatic control, the faces are moved by a pneumatic piston - which eliminates a costly hydraulic pump and its control. When under load the wedge action provides additional clamping pressure to minimize specimen slippage.
The 2716-110 and 2716-120 grips use a unique carrier/face mounting system allows for easy face insert changes. The carrier is placed on the grips and held on by springs from the grip body and against the driving piston. The faces sit on the carriers held by a couple of thumb screws. The lubrication of the jaw face carriers is through a standard grease fitting. This eliminates the need to remove either the faces or the carriers for greasing. Each face set can accommodate a wide range of specimen types offering flexibility with a minimum number of face changes.
W-5180 and W-5190 grips include a face mounting system with embedded magnets and jaw faces with circular centering disks. This design simplifies jaw face loading and holds the jaws in position when no load is applied.
Units
| Item Name | Capacity | Upper Fitting | Cat# |
|---|---|---|---|
| Pneumatic Wedge Action Grips; Capacity: 200 kN | 200 kN | M48x2mLH (Type IImLH) | 2716-121 |
| Pneumatic Wedge Action Grips; Capacity: 100 kN | 100 kN | 0.5 in clevis pin (Type Dm) | 2716-111 |
Transverse Clip-on Extensometers
W-E404 Series Transverse Extensometers are designed for measuring transverse displacements. They are self-supporting on the test specimen and will work on any width or diameter specimen from 0 to 25 mm (1 in).
W-E404-A/C/E/F types are commonly used for the measurement of Poisson’s ratio and transverse strain on anisotropic materials such as composites. They are frequently used simultaneously with axial extensometers. These units easily clip on to the specimen and are held in place with an integral spring. The rounded contact edges help maintain the position on the specimen.
A special averaging version (2640-010) is available for determining "r" value of sheet metals (NOT suitable for Poisson's Ratio).
The specimen displacement is measured at a single point using a high-accuracy, dual flexure strain-gauge sensor designed for strength and improved performance.
The special version for 'r' value measures the specimen displacement at two points using two individual high-accuracy, dual-flexure strain-gauge sensors. The output of each sensor is merged to produce a single averaged output.
The design makes these units very durable and they may be left on the specimen through specimen failure.
The extensometers are easy to mount and feature integral springs that hold the unit on the test specimen. An adjustable specimen contact bar below the knife edges provides good mechanical stability for the extensometer body.
Units
| Item Name | Travel Transverse | Cat# |
|---|---|---|
| Transverse Averaging Extensometer | 2640-010 | |
| Transverse Extensometer, Range +/- 2.5 mm | W-E404-F | |
| Transverse Extensometer, Range +/- 0.1 in | W-E404-C | |
| Transverse Extensometer, Range +/- 0.5 mm | W-E404-E |
這些平均軸向夾持式引伸計可測量試樣兩側的軸向應變。可提供單個平均應變輸出或兩個獨立軸向應變輸出的版本。在所有情況下，使用平均軸向應變可以校正由於不對中引起的任何試樣彎曲，從而一致地確定材料性能，例如模量。獨立的輸出版本允許同時監控兩者;平均軸向應變和彎曲應變。
引伸計使用應變片進行測量，由高強度鋁、鈦和不鏽鋼製成。所有引伸計均採用簡單的單手作，可確保一致的結果，並有助於在環境試驗箱內安全使用。該引伸計具有自動電氣校準和感測器識別功能，包括唯一的數位序列號。
引伸計標配錐形點，建議大多數複合材料使用錐形點。提供其他觸點選項：線路觸點，建議與熱塑性塑膠等軟材料一起使用;和 V 形輪廓，最適合薄片試樣。
單位
| 商品名稱 | 行程 軸向 | 貓# |
|---|---|---|
| 平均引伸計， 25 mm 標距長度， +5 / -2% 應變， 單輸出 | -2 至 +5% | 2650-560 |
| 平均引伸計， 1 in 標距長度， +5 / -2% 應變， 單輸出 | -2 至 +5% | 2650-564 |
The Instron 2650 Series Biaxial Extensometers are ideally suited for testing a wide range of materials, including polymer matrix composites, metals, and plastics over a range of temperatures. Two sensors measure axial strain on opposite sides of the specimen and a third sensor measures transverse strain. The extensometers meet the calibration requirements of ASTM E83 class B1, ISO 9513 class 0.5, and ISO 527.
These bi-axial clip-on extensometers use strain gauges for measurement and are constructed from high-strength aluminum, titanium, and stainless steel. All of the extensometers feature simple, single-handed operation which ensures consistent results and facilitates safe use within a temperature chamber. The extensometer incorporates automatic electrical calibration and transducer recognition including a unique digital serial number.
All of the extensometers measure the axial strain on both sides of the specimen. Versions are available that provide either a single averaged axial strain output or two independent axial strain outputs. In all cases, the use of average axial strain corrects for any specimen bending due to misalignment for the consistent and accurate determination of modulus. The independent output versions allow simultaneous monitoring of both; the average axial and the bending strain. Additionally, the extensometer includes a sensor that measures transverse strain allowing for the determination of properties such as Poisson's Ratio and the In-Plane Shear Modulus.
Conical points are provided as standard with the extensometer and are recommended for most composite materials. Other contact options are available: line contacts, which are recommended for use with soft materials such as thermoplastics; and vee profiles, which are most suitable for thin section test pieces.
UNITS
氣動作用和緩衝式拉伸夾具用於測試繩索、輪胎簾線、鋼絲圈、電纜、紗線和絲束樣本。
These machines are developed to obtain specimens by punching, using hollow dies of different sizes and contours. Several hundreds of dies can be created by interchangeable socket punches with different profiles and size according to the standards and to the customer needs. Dies are made of steel with hand finished cutting edges and can be provided with ejector for easy removal of the specimen after punching.
Compact design of instrument for an easy and fast preparation
Manual and automatic models obtain specimens of different size and geometries for a wide range of plastics testing applications
High level of results repeatability and time saving test procedures
The Custom Solutions group at Instron has been developing unique grips and platens to meet our customers’ unique needs for decades. Customized cord and yarn grips or custom webbing grips of various sizes are just a small example of things that we can do. Whether your grip or platen is being purchased with a new frame or being used with your current set-up, we will work diligently to understand your goals and ensure they are met or exceeded. Please browse the gallery above to see some of our recent projects.
We also make specialized jaw faces!
Click here to see our existing customized grips or platens for specific applications.
Requires: grip faces and fatigue rated adapters
Quantity: 2 grips
Capacity: 500 N (100 lb, 50 kgf).
| Notes | For holding PCBs and assemblies |
Capacity: 2.2 kN (500 lb, 220 kg)
Minimum specimen diameter: 0.125 mm (0.005 in).
Maximum specimen diameter: 1.52 mm (0.06 in).
Upper and lower fittings: Type Om (12 mm connection with 6 mm diameter clevis pin).
| Accessory Height | 101 mm (4 in) |
| Accessory Width | 84 mm (3.3125 in) |
| Capacity | 2.22 kN (500 lbf) |
| Effective Length | 139 mm (5.472 in) |
| Lower Fitting | 6 mm clevis pin (Type Om) |
| Specimen Diameter | 0.125 - 1.5 mm (0.005 - 0.06 in) |
| Temperature Rating | +10 to +40 °C (+50 to +150 °F) |
| Upper Fitting | 6 mm clevis pin (Type Om) |
The Custom Solutions group at Instron has been developing unique fixtures to meet our customers’ unique needs for decades. If you need to push or pull against something unique or novel, like yak hair or pizza dough, we are interested in learning more about it. Whether your fixture is being purchased with a new frame or being used with your current set-up, we will work diligently to understand your goals and ensure they are met or exceeded. Please browse the gallery above to see some of our recent projects.
Click here to see our existing customized fixtures for specific applications.
Transverse Averaging Extensometer with single channel output for attachment to thin rigid specimens, 0.3 mm to 4 mm thick.
Accepts specimens from 10 mm to 20 mm wide and from 15 mm to 25 mm wide. Suitable for ´r´ and ´n´ testing on sheet metals.
Requires suitable axial extensometer of 50 mm gauge length minimum for ´r´ value determination. Requires single strain conditioner.
Temperature Range: -80 °C to +100 °C
The 2640 series averaging transverse extensometer is designed to measure average transverse gauge length and strain with a single output channel.
Compression parallel to grain per ASTM D143 (primary method).
Requires Platens (75 mm (3 in) minimum diameter for primary method, Spherical Seat and Extensometer (2630); order separately.
| Accessory Weight | 0.65 kg (1.4 lb) |
| Specimen Zone | 200 mm (8 in) |
| Specimen Thickness | 50 mm (2 in) |
| Specimen Width | 50 mm (2 in) |
| Testing Standards | BS 373, ASTM D 143 |
| Upper Effective Length | 150 mm (6 in) |
Digital caliper with carbide standard jaws. Resolution of 0.0005" (0.01mm). Accuracy of ±0.001" (±0.02mm). Repeatability of 0.0005" (0.01mm).
Designed to be used in conjunction with Automatic Data Entry Interface listed separately. Qualifies as one (1) device. Includes case.
Note: This measuring device requires an Automatic Data Entry Interface listed separately for direct entry of measurements into software.
Biaxial Extensometer 2 inch Gauge Length providing one averaged axial and one transverse strain measurement.
Features:
Transverse Travel +/- 0.02 in (Strain range depends on specimen width)
The extensometer provides a single averaged axial output along with a single transverse output and requires 2 Sensor channels. It has electrical calibration and is self-identifying with 3300, 3400, 4200, 4300, 4400, 4500, 5500, 5800, 5900, 6800, 8500, 8800 Tower, and 8800MT Series Systems.
The extensometer is supplied with a single set of conical point specimen contacts.
These bi-axial and averaging axial clip-on extensometers use strain gauges for measurement and are constructed from high-strength aluminum, titanium, and stainless steel. All of the extensometers feature simple, single-handed operation. The extensometer incorporates automatic electrical calibration and transducer recognition including a unique digital serial number.
Instead of working with a pallet mounted onto the crash sled, the patented Instron two piece sled integrates the pallet system into the sled design. This allows for much faster set up times using multiple pallets whilst significantly reducing the overall mass of the sled to provide a higher dynamic performance.
The pallets can be tailored to meet the specific needs of the test laboratory.
Back to CSA.
0.5" gauge length.
| Gauge Length | 0.50 in |
Capacity 300 kN (67,500 lbf, 30,000 kgf)
Specimen Range:
Minimum Specimen Length without the use of an extensometer is 270 mm (10.63 in)
Ambient temperature use only.
Upper and Lower Fittings: Type IIfRH (M48 x 2)
Weight Per Grip Body 123 kg (270 lb)
Grip Body Dimensions W x L x D: 445 x 302 x 127 mm (17.5 x 11.875 x 5 in)
Effective Length using standard threaded mounting:
Grip faces sold separately use: W-5246 & W-5247 series grip faces
Configuration Notes:
| Accessory Weight | 123 kg (270 lb) |
| Accessory Width | 445 mm (17.5 in) |
| Capacity | 300 kN (67,500 lbf) |
| Lower Fitting | Type IIfRH (M48x2) |
| Temperature Rating | 10-38 °C (50-100 °F) |
| Upper Effective Length | 329 mm (13.0 in) |
| Upper Fitting | Type IIfRH (M48x2) |
For Instron standard manual gauge punch devices.
Suitable for 1 inch, 2 inch, 1.4 inch, 25 mm or 50 mm gauge lengths.
Biaxial Extensometer 1 inch Gauge Length providing one averaged axial and one transverse strain measurement.
Features:
Transverse Travel +/- 0.02 in (Strain range depends on specimen width)
The extensometer provides a single averaged axial output along with a single transverse output and requires 2 Sensor channels. It has electrical calibration and is self-identifying with 3300, 3400, 4200, 4300, 4400, 4500, 5500, 5800, 5900, 6800, 8500, 8800 Tower, and 8800MT Series Systems.
The extensometer is supplied with a single set of conical point specimen contacts.
These bi-axial and averaging axial clip-on extensometers use strain gauges for measurement and are constructed from high-strength aluminum, titanium, and stainless steel. All of the extensometers feature simple, single-handed operation. The extensometer incorporates automatic electrical calibration and transducer recognition including a unique digital serial number.
Set includes 9 probes
Upper fitting: Requires Chuck 2830-036.
Lower fitting: Requires optional support plates with Drip tray S5400A and Support Frame S4427A.
Flat-end puncture probes produce a shear stress in the specimen. The force required to cause shearing as the probe penetrates the specimen relates to texture properties such as firmness and hardness.
Capacity: 2 kN
Dimensions: 1 mm (0.039 in) thick x 50 mm(2 in) wide blade. Similar to Warner Bratzler blade without the V-notch.
Upper fitting: 6 mm clevis, male
Lower fitting: Requires Warner Bratzler S5406A
*May use with S5401A plain plate for Noodle Shearing test
500 kN (110 kip) Dynamic Capacity, With 100mm (3.94 in) Diameter Upper Roller and 50mm (1.97 in) Diameter Lower Rollers
Requires: fatigue rated adapters
Catalog number 2810-250
Rated capacity 500 kN (50000 kgf, 112500 lbf)
3-point flexure fixture with an optional conversion kit for 4-point loading
Air Cushion Isolators (for frames 3 & 4). Not suitable for 8801 or 8516 (1 Set)
Suitable for testing frequencies above 15Hz.
| Compatible Frame Models | Air Cushion Isolators (for frames 3 & 4). Not suitable for 8801 or 8516 Suitable for testing frequ |
For mounting ElectroPuls table-top systems when used for low to medium acceleration dynamic tests (accelerations below 6g)
Robust design with high stiffness grey frame and light-grey scratch-resistant table-top
Pre-drilled with mounting holes to suit E1000 or E3000 systems
| Model | Height | Width | Depth | Weight | ||||
|---|---|---|---|---|---|---|---|---|
| mm | in | mm | in | mm | in | kg | lb | |
| 1300-311 | 785 | 31 | 1000 | 39 | 750 | 30 | 56 | 123 |
| 1300-315 | 800 | 32 | 1000 | 39 | 750 | 30 | 65 | 143 |
High-Stiffness Support Table for ElectroPuls E1000 and E3000 tabletop test instruments.
Combination 25mm and 50 mm Manual Gauge Point Punch.
| Gauge Length | 25/50 mm |
Dynamic Extensometer for direct strain measurement and closed loop strain control. Suitable for tensile, compressive & fatigue testing, the extensometer has a 12.5mm gauge length with a travel of ±5mm giving ±40% strain.
It includes a 12.5mm extender to give a gauge length of 25mm and ±20% strain and a 37.5mm extender to give a gauge length of 50mm and strain of ±10%.
Temperature range: -80C to +200C. Compatible with 8800 and 8500Plus controllers. May be immersed in acetone, silicone or alcohol.
Wide operating temperature range, from -80 °C to 200 °C (-112 °F to 392 °F)
Designed to meet the requirements of ISO 9513, BS 3846 and ASTM E 83
This guide provides instructions on how to use your system components and controls, procedures for setting limits, calibration and other frequently performed operating tasks.
Fracture Mechanics Fixtures for 50 mm wide compact tension specimen.
Rated capacity: ±250kN Dynamic, 500 kN Static
Requires: fatigue rated adapters. Mechanical interface M48 x 2 right hand female thread.
(1 Pair)
Supports closed-loop control and data acquisition for only one transducer (strain gage bridge, LVDT, or +/-10V BNC input).
Includes:
Note: Not recommended for customer installation to an existing tower. Always include service time when quoting as an accessory
Per MIL-STD-3010
Simple puncture fixture with clearly specified dimensions.
Upper fitting: Type O (12 mm connection with 6 mm clevis pin)
Lower fitting: Type D (1.25 in connection with 1/2 in clevis pin)
| Accessory Height | 356 mm (14 in) |
| Accessory Width | 125 mm (5 in) |
| Capacity | 2.5 kN (500 lbf) |
| Lower Fitting | 1/2 inch Clevis Pin (Type Dm) |
| Temperature Rating | +10 to +40 °C (+50 to +100 °F) |
| Testing Standards | MIL-STD-3010 |
| Upper Fitting | 6 mm Clevis Pin (Type Om) |
Digital micrometer with flat anvils for measuring outside diameter and thickness. Resolution of 0.00005" (0.001mm). Accuracy of ±0.0001" (±0.002mm).
Designed to be used in conjunction with Automatic Data Entry Interface listed separately. Qualifies as one (1) device. Includes case.
Note: This measuring device requires an Automatic Data Entry Interface listed separately for direct entry of measurements into software.
Partner Interface that translates and routes data from a device with an RS-232 output into the Partner software (i.e. micrometer, caliper, barcode reader, etc).
Allows the use of up to two (2) such devices. Requires one (1) PC serial port.
Includes all necessary hardware and software.
Notes:
Capacity: 5.0 kN (1,000 lb, 500 kg).
Incorporates a surfalloy coated clamping surface.
Temperature range: -10 °C to 80 °C (14 °F to 176 °F).
Maximum specimen diameter: 2 mm (0.08 in).
Upper and lower fittings: Type Dm (1.25 in connection with ½ in clevis pin).
Requires a rigid coupling and an Automatic Air Control Kit or Pneumatic Foot Switch
The Instron® pneumatic tire cord grips provide a convenient method for clamping tire cord and braided wire during testing. A guide pin allows for easy loading onto a graduated radius cam, which provides a stress-reduced clamping area on the specimen. The clamping mechanism can be activated either automatically or through a footswitch, which allows for hands-free grip operation enabling the specimen to be held with both hands for easy loading. Pneumatic cord and yarn grips provide selectable clamping force to accommodate different materials and excellent follow-up action that compensates for decay of the holding force due to specimen creep.
Notching machines are designed to notch specimens for impact resilience according to Izod, Charpy and Tensile impact methods. These instruments use a linear knife cutting technique to avoid overheating and consequent stresses during the specimen's notching operations. Therefore, an accurate notch preparation is guaranteed. Manual, motorized and fully-automatic models are available to cover the different testing needs.
Rated Capacity: ±50kN Dynamic, 100kN Static
Temperature Range: -50 to 315°C
Overall accessory length 400mm
Includes:
Capacity 2000kN
(450,000 lbf, 200,000 kgf)
Specimen ranges:
Grips are supplied with:
Grips interfaced to the machine’s hydraulic power supply when ordered with a new hydraulic UTM. (Consult factory for interfacing of grips to an existing machine or for systems where an independent hydraulic power supply is required)
Efective grip heights:
Upper grip: 715 mm (28.125 in.)
Lower Grip: 770 mm (30.3125 in.)
Capacity: 1 kN
Dimensions: 2 , 4, 6, 8, and 10 mm (0.08, 0.16, 0.24, 0.31,
and 0.39 in) diameter ball.
The 2 mm probe is 80 mm (3.15 in) long
All others are 150 mm (5.9 in) long.
Requires 3-Jaw chuck 2830-036
Flat-end puncture probes produce a shear stress in the specimen. The force required to cause shearing as the probe penetrates the specimen relates to texture properties such as firmness and hardness.
Averaging Extensometer 25 mm Axial Gauge Length providing a single averaged axial output.
Features:
The extensometer provides a single averaged axial output. It has electrical calibration and is self-identifying with 3300, 3400, 4200, 4300, 4400, 4500, 5500, 5800, 5900, 6800, 8500, 8800 Tower, and 8800MT Series Systems.
These bi-axial and averaging axial clip-on extensometers use strain gauges for measurement and are constructed from high-strength aluminum, titanium, and stainless steel. All of the extensometers feature simple, single-handed operation. The extensometer incorporates automatic electrical calibration and transducer recognition including a unique digital serial number.
8" gauge length.
| Gauge Length | 8.00 in |
Capacity: 10 kN (2,000 lb, 1,000 kg).
Maximum specimen diameter: 5 mm (0.2 in).
Upper and lower fittings: Type Dm (1.25 in connection with ½ in clevis pin).
Requires a rigid coupling and an Automatic Air Control Kit or Pneumatic Foot Switch
Capacity: 10 kN (2,000 lb, 1,000 kg).
Maximum specimen diameter: 5 mm (0.2 in).
Upper and lower fittings: Type Dm (1.25 in connection with ½ in clevis pin).
Requires a rigid coupling and an Automatic Air Control Kit or Pneumatic Foot Switch
(ref. 2714-107)
| Accessory Weight | 10 kg (22 lb) |
| Accessory Width | 245 mm (9.6 in) |
| Capacity | 10 kN (2250 lbf) |
| Effective Length | 230 mm (9.1 in) |
| Lower Fitting | 1/2 in clevis pin (Type Dm) |
| Specimen Diameter | 5 mm (.2 in) |
| Temperature Rating | -10 to + 80 °C (+14 to +176 °F) |
| Upper Fitting | 1/2 in clevis pin (Type Dm) |
+/- 0.5 mm travel
For general purpose transverse or diametral strain measurement
on axially loaded specimens. Used for measurement of Poisson's ratio,
on anisotropic materials like many composites and similar applications.
Specifications:
W-E404 Series Transverse Extensometers are designed for measuring transverse displacements. They are self-supporting on the test specimen and will work on any width or diameter specimen from 0 to 25 mm(1 in).
Digital caliper with carbide pointed jaws for measuring small holes, grooves, and outer diameters encountered in precision work. Resolution of 0.0005" (0.01mm). Accuracy of ±0.001" (±0.02mm). Repeatability of 0.0005" (0.01mm).
Designed to be used in conjunction with Automatic Data Entry Interface listed separately. Qualifies as one (1) device. Includes case.
Note: This measuring device requires an Automatic Data Entry Interface listed separately for direct entry of measurements into software.
Biaxial Extensometer 50 mm Axial Gauge Length providing one average axial and one transverse strain measurement.
Features:
Transverse Travel +/-0.5 (Strain range depends on specimen width)
The extensometer provides a single averaged axial output along with a single transverse output and requires 2 sensor channels. It has electrical calibration and is self-identifying with 3300, 3400, 4200, 4300, 4400, 4500, 5500, 5800, 5900, 6800, 8500, 8800 Tower, and 8800MT Series Systems.
These bi-axial and averaging axial clip-on extensometers use strain gauges for measurement and are constructed from high-strength aluminum, titanium, and stainless steel. All of the extensometers feature simple, single-handed operation. The extensometer incorporates automatic electrical calibration and transducer recognition including a unique digital serial number.
Capacity: 200 kN (40,000 lb, 20,000 kg)
Upper and lower fittings: Type llm (M48 X 2 LH)
Maximum specimen thickness: 40 mm (flat)
Maximum specimen width: 75 mm (flat)
Maximum specimen diameter: 50 mm (round)
Clamping length: 70 mm.
Temperature range: ambient only
Requires faces
Includes an air distribution kit with both, 1/4 NPTM (7/16-20), and 1/4 inch hose barb end connections
An Automatic Air Control Kit or Footswitch is recommended
The Pneumatic Wedge Action Grips, available in 100 or 200 kN, provide a convenient method of clamping both large round and flat specimen shapes, up to a 50 mm (2 in) diameter, or flat specimens up to 40 mm (1.57 in) thick respectively. V-face grips are used for round specimens by design and have a reduced area at the center that compromises their ability to absorb high-energy breaks without fracture. This grip uses a split V-face configuration that allows the break energy to be dissipated without damaging the faces.
The Instron 2718-550 hydraulic grip pump is designed for continuous 24/7 operation in manual and automated testing systems in industrial environments.
It can be configured to provide a maximum pressure of 207 bar (3000 PSI for use with wedge grips), or alternatively 138 bar (1900 PSI) for use with side acting grips. The unit incorporates two analogue pressure gauges, that are easily visible to the operator from the front of the pump.
The 2718-550 pump is configured to operate with a two stage flow speed, with a higher flow rate up to 69bar (1000psi) to increase productivity. Once clamping the specimen the pressure will then increase to the full pressure at the slower flow rate.
The 2718-550 hydraulic grip pump is activated by a footswitch, while a handset provides close/open functionality of each grip independently. The gripping pressure is easily configured by an electrical adjustment knob located on the front of the pump.
| Grip Type | Static Load Capacity | Catalog No. |
| Advanced Hydraulic Wedge Action Grips | ±130 kN | 2743-401 |
| Advanced Hydraulic Wedge Action Grips | ±312 kN | 2742-501 |
| Advanced Hydraulic Wedge Action Grips | ±600 kN | 2742-601 |
| Hydraulic Dual Side Action Grips | 250 kN | W-5450 |
| Hydraulic Dual Side Action Grips | 600 kN | W-5420 |
The Instron® 2718-550 hydraulic grip pump is designed for continuous 24/7 operation for both manual and automated testing systems in industrial environments
Includes:
| Accessory Length | 60.3 mm (2.375 in) |
| Lower Fitting | M12x1.75mRH |
| Specimen Diameter | mm (0.375 - 1.000 in) |
| Torque Capacity | 57 Nm (500 in-lb) |
| Upper Effective Length | 47.6 mm (1.875 in) |
| Upper Fitting | M12x1.75mRH |
Capacity: 2 kN
Size: 180 x 180mm (7.1 X 7.1 in) Drip tray.
Lower fitting: 1/2 in clevis, male.
Upper fitting: Requires a food fixture.
Provides a 6 mm clevis, female connection to directly mount other accessories
The active controlled pitch simulation load unit offers a significant advantage through more realistic crash simulations and better reproduction of the dummy injury criteria. In a frontal impact, the deceleration and deformation of the vehicle body is almost always accompanied by a movement in the vertical plane. In most cases, this movement is a combination of a rotation around a point in the space in front of the vehicle with an additional vertical movement.
Pitching in crash events directly influences the acceleration and the movement path of the occupant during an impact. These movements together with the strong frontal deceleration during the impact determine the severity of the injury in interaction with the seatbelt and airbag. One focus of security system development is the management of the Head Injury Criteria (HIC) value. Earlier analyzes have shown up to 40% difference between the HIC values of sled tests with and without the possibility of pitch motion simulation. Further influences are found for neck accelerations and belt forces.
The Instron CSA systems with active pitch simulation are currently successfully used by 14 customers.
Back to CSA
Includes micrometer with ratchet, digital indicator, stand, foot switch, USB interface, and connecting cables.
Range: 0 - 25.4 mm (0 - 1.0 in)
Resolution: 0.001 mm (0.00005 in)
Suitable for testing frequencies above 15Hz
| Compatible Frame Models | Isolation mounts for 8801 or 8516 (1 set). For testing frequencies above 15Hz. |
Includes vertically mounted gage probe with indicator, stand, tip set, footswitch, USB interface, and connecting cables.
Range: 0 - 25 mm (0 - 1.0 in)
Resolution: 0.001 mm (0.00005 in)
Line Voltage: 240 VAC.
| Description | Air Compressor, portable. Line Voltage: 240 VAC.) |
Biaxial Extensometer 50 mm Axial Gauge Length providing 2 independent axial and one transverse strain measurement.
Features:
Transverse travel +/- 0.5 mm (Strain range depends on specimen width)
The extensometer provides 2 independent axial outputs along with a single transverse output and requires 3 sensor channels. It has electrical calibration and is self-identifying with 3300, 3400, 4200, 4300, 4400, 4500, 5500, 5800, 5900, 6800, 8500, 8800 Tower, and 8800MT Series Systems. The extensometer is supplied with a single set of conical point specimen contacts.
These bi-axial and averaging axial clip-on extensometers use strain gauges for measurement and are constructed from high-strength aluminum, titanium, and stainless steel. All of the extensometers feature simple, single-handed operation. The extensometer incorporates automatic electrical calibration and transducer recognition including a unique digital serial number.
Capacity: 500 N (100 lb, 50 kgf)
Includes a single grip with lead pull jaw faces.
Temperature range: 0°C to 60°C (32°F to 140°F).
Fitting: Type Om (12 mm connection with 6 mm clevis pin). The pneumatic lead pull grip is a parallel action pneumatically operated vice action grip fitted with needle nose jaw faces for lead pull testing.
Requires an automatic air kit.
1 Grip Only.
Capacity 36 kN (8,000 lb, 3,600 kg).
Minimum specimen diameter: 0.8 mm (0.031 in).
Maximum specimen diameter: 6.35 mm (0.250 in).
Upper and lower fittings: Type Dm (1.25 in connection with 0.5 in clevis pin).
| Accessory Height |
152 mm (6 in) |
|---|---|
| Accessory Width |
139 mm (5.5 in) |
| Capacity |
36 kN (8000 lbf) |
| Effective Length |
213 mm (8.375 in) |
| Lower Fitting |
1/2 in clevis pin (Type Dm) |
| Specimen Diameter |
0.8 - 6.5 mm (0.0312 - 0.25 in) |
| Temperature Rating |
+10 to +40°C (+50 to +150°F) |
| Upper Fitting |
1/2 in clevis pin (Type Dm) |
Features:
Includes side port insulation plug for blanking extensometer slot.
Requires temperature controller with thermocouples, support brackets, and top/bottom insulating port plugs (not included)
Z-Direction Tensile.
Fixture includes two test blocks and tabs.
Requires a set of grips, not included.
| Description | TAPPI T541 Internal Bond Strength of Paperboard. Z-Direction Tensile. |
|---|---|
| Lower Fitting | Requires upper and lower grip |
| Testing Standards | TAPPI T541 |
| Upper Fitting | Requires upper and lower grip |
Fatigue Rated 3 Point Bend Fixture, 100 kN (22 kip) Dynamic Capacity, With 25mm (1.0 in) Diameter Rollers
Includes: One upper roller, 25 mm (0.97 in) Diameter
Requires: fatigue rated adapters
Side crashes are the second most common type of accident. They cause the highest number of critical injuries relative to the accident rate. One reason for this is the spatial proximity of the occupant to the deformation zone. There are different test standards for the side impact. These are the side crash according to ECE-R95 (European standard) and FMVSS-214 (US standard) as well as the tests given in the consumer protection programs. In addition to the actual side impact test, there is also a Pole Side Impact test according to Euro NCAP.
Side-crash simulations on sled systems are carried out for the development of safety restraint systems. These tests begin in an early phase of the development of the whole vehicle. However, prototype parts are not always available at this time and the price of these parts is very high. For the non-destructive sled test, substantially fewer parts are needed than in a destructive test procedure. For example, a seat can be used multiple times, and the door structure with the door trim can last a whole series of tests. Since many of the test components can be re-used, a new test can be set-up in a short time. In addition to the standard side impact simulation unit, Instron can also offer additional sled options for intrusion simulation.
Instron have also successfully integrated proven structures from external partners for intrusion simulation
Back to CSA.
Two chucks are provided
NOTE: Capacity is dependant on specimen geometry. When testing smooth, round specimens, the fixture may not be able to reach full capacity without slippage.
| Accessory Length | 96.5 mm (3.80 in) |
| Lower Fitting | M12x1.75mRH ( ) |
| Specimen Diameter | 9.5 mm (0.375 in) |
| Torque Capacity | 22.5 Nm (200 in-lb) |
| Upper Effective Length | 76.2 mm (3.00 in) |
| Upper Fitting | M12x1.75mRH ( ) |
250 kN (56 kip) Dynamic Capacity, With 100mm (4.0 in) Diameter Upper Roller and 50mm (1.97 in) Diameter Lower Rollers
Requires: fatigue rated adapters
Catalog number 2810-200
Rated capacity 250 kN (25000 kgf, 56250 lbf)
3-point flexure fixture with an optional conversion kit for 4-point loading
150 kN (15,000 kg, 33,750 lbs) capacity T-Grip Bodies
The most common complication after a rear impact and a feared cause of chronic disorders is the whiplash injury. Preventive measures such as the optimization of the seat structure and head rest are proven measures to protect the occupant.
For the development and testing of the interaction between the occupant, the seat and the head rest, appropriate test methods have been developed. The current pulse requirements for rear-end impact tests at low speed are defined in the consumer protection programs (EuroNCAP) or in the USA by third party and legal regulations (IIHS Highway Insurance Institute and FMVSS202a) and other agencies worldwide.
In order to meet the high accuracy requirements of these tests, Instron has developed an expansion package that allows the highly dynamic CSA to be operated extremely precisely at a lower acceleration range. Special low - pressure supplementary equipment reduces the operating pressure of the sled system and thereby optimizes its dynamics according to the requirements of the Whiplash test specifications.
Back to CSA.
Capacity: 5.0 kN (1,000 lb, 500 kg).
Temperature range: -10 °C to 80 °C (14 °F to 176 °F).
Maximum specimen diameter: 2 mm (0.08 in).
Upper and lower fittings: Type Dm (1.25 in connection with ½ in clevis pin).
Requires a rigid coupling and an Automatic Air Control Kit or Pneumatic Foot Switch
The Instron® pneumatic tire cord grips provide a convenient method for clamping tire cord and braided wire during testing. A guide pin allows for easy loading onto a graduated radius cam, which provides a stress-reduced clamping area on the specimen. The clamping mechanism can be activated either automatically or through a footswitch, which allows for hands-free grip operation enabling the specimen to be held with both hands for easy loading. Pneumatic cord and yarn grips provide selectable clamping force to accommodate different materials and excellent follow-up action that compensates for decay of the holding force due to specimen creep.
Maximum specimen diameter: 13 mm (0.5 in). Capacity: 500 N (100 lb, 50 kg).
Temperature range: 0 °C to 100 °C (32 °F to 212 °F).
Fitting: 6 mm clevis, male.
Minimum specimen diameter: 1.5 mm (.06 in).
Weight: 340 g (.75 lb). Includes one chuck.
Flat-end puncture probes produce a shear stress in the specimen. The force required to cause shearing as the probe penetrates the specimen relates to texture properties such as firmness and hardness.
This guide provides instructions on how to use your components and other frequently performed operating tasks. This manual covers four types of grips: a set of mechanical action wedge grips, manually operated screw grips, a set of chuck grips similar to the chuck on an electric drill, and a set of pincer-action fiber grips. The four types of grips described are covered throughout this manual. The manual is divided into chapters covering description, specifications, installation, operation, maintenance, and parts breakdown. The chapters are subdivided into information about each type of grip.
Provides an integrated polycarbonate based guard with a hinged door to prevent operator access to test space when the E3000 is at high power. The guard is also designed to minimize hazards associated with specimen failure.
Includes interlock with ElectroPuls controller to prevent the instrument being switched into high power mode whilst the door is open. Also includes key-switch to over-ride the interlock in extreme cases allowing the machine to operated at high power with the guard door open.
NOTE: Only compatible with 8800 Tower controller
| Accessory Depth - Door Closed | 542 mm (21.3 in) |
| Accessory Depth - Door Open | 1086 mm (42.8 in) |
| Accessory Height - Door Closed | 1283 mm (50.5 in) |
| Accessory Height - Door Open | 1283 mm (50.5 in) |
| Accessory Width - Door Closed | 948 mm (37.3 in) |
| Accessory Width - Door Open | 1234 mm (48.6 in) |
Set includes:
| Accessory Length | 111.1 mm (4.375 in) |
| Lower Fitting | M12x1.75mRH ( ) |
| Specimen Diameter | 0.80 - 6.30 mm (0.0313 - 0.2500 in) |
| Torque Capacity | 225 Nm (2000 in-lb) |
| Upper Effective Length | 85.7 mm (3.375 in) |
| Upper Fitting | M12x1.75mRH ( ) |
Overview:
EFI software compatibility:
Provides an integrated polycarbonate based guard with a hinged door to prevent operator access to test space when the E20000 is at high power. The guard is also designed to minimize hazards associated with specimen failure.
Includes interlock with ElectroPuls controller to prevent the instrument being switched into high power mode whilst the door is open. Also includes key-switch to over-ride the interlock in extreme cases allowing the machine to operated at high power with the guard door open.
NOTE: Only compatible with 8800MT controller
| Accessory Depth - Door Closed | 601 mm (23.7 in) |
| Accessory Depth - Door Open | 1427 mm (56.18 in) |
| Accessory Height - Door Closed | 1295 mm (50.98 in) |
| Accessory Height - Door Open | 1295 mm (50.98 in) |
| Accessory Width - Door Closed | 1072 mm (42.20 in) |
| Accessory Width - Door Open | 1872 mm (73.70 in) |
Provides an integrated polycarbonate based guard with a hinged door to prevent operator access to test space when the E10000 is at high power. The guard is also designed to minimize hazards associated with specimen failure.
Includes interlock with ElectroPuls controller to prevent the instrument being switched into high power mode whilst the door is open. Also includes key-switch to over-ride the interlock in extreme cases allowing the machine to operated at high power with the guard door open.
NOTE: Only compatible with 8800MT controller
| Accessory Depth - Door Closed | 496 mm (19.5 in) |
| Accessory Depth - Door Open | 1286 mm (50.65 in) |
| Accessory Height - Door Closed | 1304 mm (51.34 in) |
| Accessory Height - Door Open | 1304 mm (51.34 in) |
| Accessory Width - Door Closed | 1054 mm (41.5 in) |
| Accessory Width - Door Open | 1296 mm (51.02 in) |
智能關閉氣動套件（料號2701-095）與所有3400和6800系列機型相容，是系統集成選件，可監測及控制Instron氣動夾具的氣壓。
| 相容主機型號 | 3400 系列, 6800 系列 |
|---|---|
| 連接樣式 | ¼ 吋 OD 管線 |
| 最大輸入壓力 | 8.3 bar (120psi) |
| 最大輸出壓力 | 6.9bar (100psi) |
Capacity: 1.0 kN (225 lb, 100 kg).
Temperature range: -70 °C to 260 °C (-100 °F to 500 °F).
Maximum specimen diameter: 3.175 mm (0.125 in).
Upper and lower fittings: pneumatic connection.
Requires pneumatic pullrods and an Automatic Air Control Kit or Pneumatic Foot Switch
Two types of bend fixtures are available for evaluating the ductility of plate specimens and welded ferrous and non-ferrous materials. The main difference between the two fixtures is in the base, the guided bend test fixture has a fixed span base, while the weld bend test fixture has an adjustable span base.
Both fixtures use plungers or loading struts with a fixed diameter nose for testing a particular specimen thickness. The plungers are attached to the adjustable crosshead using the grip bumper plate or a threaded adapter.
The base is equipped with a dowel hole in the center so that it can be doweled to the compression table and kept from sliding during a test. This also will maintain the alignment of the plunger in relation to base so that the force is applied in the center of the span.
The hardened rollers in the base are captured but free to rotate to allow the specimen to slide as the plunger moves between the rollers. The depth of the base will typically allow up to a full 180 degree bend in the specimen.
The bending force is applied as the specimen is forced against the plunger, either as the base is raised with the table or as the crosshead moves down depending on the frame being used. The plunger forces the specimen into a 180 degree bend against the rollers on the base.
On the weld bend test fixture, one half of the base can be adjusted to one of four different positions to allow for testing different thickness specimens. A separate plunger or strut is required for each thickness specimen, several struts are available depending on the fixture.
Guided bend fixtures have a fixed span base and a single diameter loading strut or plunger to form a complete assembly. Specimen loading is carried the same as with the weld bend fixture though a separate assembly must be purchased for each specimen thickness.
Guided-Bend / Weld Bend Test Fixture, Adjustable Span for "U" bend tests of plane plate or welded flat specimens.
Fixture consists of a t-slot base with adjustable span supports supported by two tie rods.
Fixture specifications:
100kN (22,500 lbf) if installed fully supported
If installed with overhang, capacity is rated per below
Capacity = 100kN (22,500 lbf) where x < 125mm (5 in)
Capacity (kN) = 12,600/x when x > 125 mm
Capacity (lbf) = 111,900/x when x > 5 in
Where x = distance from end of machine loading table
to lower flexure support
Fixture meets the following US and International standards:
ASTM A370-07a, ASTM E190-92, ASTM E290-97a, ANSI/AWS B4.0-98, API 1104, API 5L, AS 2205.3.1, ASME IX 2004, JIS Z2248, GOST 14019 (for specimens 19 to 38.1 mm thick), ISO 5173, ISO 7438, EN ISO 15630-1, EN 910.
Notes:
Includes 0.5, 1.0, 1.5, 2.0 inch diameter loading noses.
CAUTION:
Most standards require loading nose diameters of 4 x specimen thickness. However, some standards allow for other diameter loading noses to be specified locally or as agreed between vendor and customer. It is the customer's responsibility to ensure the proper size loading noses are ordered.
Note: Other size loading noses available individually or in sets as special order.
Metric Loading Nose Set for Guided Bend / Weld Bend Test Fixture. Includes 12, 16, 20, 24, 32, 40, 48 mm diameter loading noses.
CAUTION:
Most standards require loading nose diameters of 4 x specimen thickness. However, some standards allow for other diameter loading noses to be specified locally or as agreed between vendor and customer. It is the customer's responsibility to ensure the proper size loading noses are ordered.
Note: Other size loading noses available individually or in sets as special order.
| Anvil Diameter | 38.1 mm (1.5 in) |
| Capacity | 100 kN (22,500 lbf) |
| Lower Fitting | 12.7 mm (0.5 in) ( ) |
| Specimen Width | up to 76 mm (up to 3.0 in) |
| Support Span | 0-250 mm (0-10 in) |
| Upper Fitting | Refer to W-6810-A/-B ( ) |
Designed in accordance with international standards such as ASTM E399, E647 & E1820
Rated Capacity: ±10kN Dynamic, 20kN Static
Temperature Range: -50 to 315°C
Includes:
Note: Requires 2780-120 for use with a standard 3119-600 Series Chamber
| Capacity | ±10 dynamic, 20 static kN ( ±2200 dynamic, 4500 static lbf) |
| Specimen Width | 12.5 mm (0.49 in) |
| Testing Standards | ASTM E399, ASTM E647, ASTM E1820 ( ) |
±25kN / ±100Nm Fatigue Rated Hydraulic Wedge Grips for 8874 System
8874 machine requires 8000-049 attachment kit if load cell is fitted to actuator
Requires: Jaw faces (select from 2703-801 to 804 as required) and 207 Bar (3000psi) grip controller
Quantity: 2 grips
±25 kN/100 Nm (5.6 kip/0.6 kip-in) Axial/Torsional Hydraulic Grips catalog number 8260C
Load Frame Support Base/Extension for Models 4481, 4482, 4484, 4485, 5881, 5882, 5884, 5885, 5885H, 5982, 5984, 5985 load frames. Adds approximately 295 mm (11.6 in) to overall load frame height. An accessory storage drawer is included. For use with single test space, standard height and width load frames only.
Requires stabilizers if ordered with second test space and/or extra height.
Beyond extra height, stabilizers must be bolted to floor.
| Accessory Depth | 757 mm (29.8 in) |
| Accessory Height | 300 mm (12 in) |
| Accessory Width | 1130 mm (44.5 in) |
| Compatible Frame Models | Models 44481, 4482, 4484, 4485, 5881, 5882, 5884, 5885, 5885H, 5982, 5984, 5985 load frames ( ) |
Hand Held Automatic Caliper Measurement System with Carbide Tips. Includes a hand held caliper with digital indicator, carbide tips, footswitch, USB interface and connecting cables.
Range: 0 - 150 mm (0 - 6 in)
Resolution: 0.01 mm (0 .0005 in)
207 Bar (3000psi) Hydraulic Grip Controller And Manifold
Suitable for use on 8801/2/3/4 and 8871/2/4 machines. Provides opening and closing control of the grips with adjustable gripping pressure and handset controls. Includes hoses for connection to the grips and to the system's hydraulic supply.
Designed to be bolted to the table of the testing machine (may require addition of tapped holes).
| Compatible Frame Models | 8801/2/3/4, 8871/2/4, 8511, 8516, and 8502/3/4/5/6. ( ) |
| Description | Hydraulic Grip Controls for Servohydraulic Test Systems ( ) |
100 kN (10,000 kg, 22,500 lbs) capacity T-Grip Bodies.
Capacity: 5.0 kN (1,000 lb, 500 kg).
Incorporates a grooved channel for specimen guidance.
Temperature range: -10 °C to 80 °C (14 °F to 176 °F).
Maximum specimen diameter: 2 mm (0.08 in).
Upper and lower fittings: Type Dm (1.25 in connection with ½ in clevis pin).
Requires a rigid coupling and an Automatic Air Control Kit or Pneumatic Foot Switch
The Instron® pneumatic tire cord grips provide a convenient method for clamping tire cord and braided wire during testing.
The cold bend fixture consists of a base with two infinitely adjustable supports and a plunger (loading strut). Different size bending pins can be ordered to mount on the loading strut to change the radius of the bend. The fixture is designed to bend steel into a "U" shape bend. The finished bend can be near (but never more than) 180 degrees.
Conforms to ASTM A615, A706, A966A and BS4449. The heavy duty base with adjustable span is designed to perform a nominal 90 / 180 degree bend test on # 3 through # 18 (M8-M50) reinforcement bar (rebar), when used with the appropriate bending pins.
The loading strut is mounted in the compression space of a testing machine. The fixture base rests on the machine table and is aligned with the loading strut using a centering pin.
The supports are adjustable to any desired span using a scale that has an origin at the center of the base. Both English and Metric scales are located on the base. The supports clamp to the base by T-slots and use threaded rods to resist deflection during loading. The base is designed to be supported by the machine table or base and can only achieve full capacity when supported with an overhang of 64 mm (2.5 in) or less on each side.
Cold Bend Testing Fixture for bend testing of steel reinforcement bars in general accordance with Specifications; ASTM A615, A706, A996A, & BS4449
A heavy duty table mounted base fixture with an adjustable span is designed for performing the nominal 90 / 180 degree bend tests on #3 through #18 (M8-M50) rebar, when used with the appropriate loading pins. A loading strut, capable of accepting various diameter bending pins, is provided and must be adapted to the adjustable crosshead.
Specifications:
Capacity = 200kN (45,000 lbf) where x < 64mm (2.5 in)
Capacity (kN) = 12,600/x when x > 64 mm
Capacity (lbf) = 111,900/x when x > 2.5 in
(Pin sets based on specification standards and specimen sizes offered separately)
Combined Weight (without bending pins): 83 kg (183 lbs)
Anvil diameter: 6.4 mm (0.25 in).
For fabric specimens up to 76 mm (3 in) wide.
Per ASTM D-4964.
| Accessory Weight | 0.5 kg (1.1 lb) |
| Accessory Width | 108 mm (4.3 in) |
| Anvil Diameter | 6.4 mm (0.25 in) |
| Capacity | 2.5 kN (560 lbf) |
| Lower Fitting | 6 mm Clevis Pin (Type Om) ( ) |
| Specimen Width | 76 mm (3 in) |
| Temperature Rating | +10 to +40 °C (+50 to +100 °F) |
| Testing Standards | ASTM D 4964 ( ) |
| Upper Effective Length | 97 mm (3.8 in) |
| Upper Fitting | 6 mm Clevis Pin (Type Om) ( ) |
Capacity 600 kN (135,000 lbf, 60,000 kgf)
Specimen Range:
Minimum Specimen Length without the use of an extensometer is 300 mm (11.8 in)
Ambient temperature use only.
Upper and Lower Fittings: Type IIAf RH (M72x3p RH)
Weight Per Grip Body: 327 kg (720 lb)
Grip Body Dimensions W x L x D: 546 x 451 x 203 mm (21.5 x 17.75 x 8 in)
Grip faces sold separately use: W-5197 & W-5198 series grip faces
Configuration Notes:
| Accessory Weight | 327 kg (720 lb) |
| Accessory Width | 546 mm (21.5 in) |
| Capacity | 600 kN (135,000 lbf) |
| Lower Fitting | Type IIAf RH (M72x3P RH) ( ) |
| Temperature Rating | 10-38 °C (50-100 °F) |
| Upper Effective Length | 499 mm (19.625 in) |
| Upper Fitting | Type IIAf RH (M72x3P RH) ( ) |
Capacity: 2 kN
For use with food testing Drip Tray S5400A.
Dimensions: 95 x 95 x 80 mm (3.7 x 3.7 x 3.1 in) height.
Lower fitting: Drip Tray S5400A.
Upper fitting: Requires a food fixture.
Dynamic Extensometer for direct strain measurement and closed loop strain control. Suitable for tensile, compressive & fatigue testing, the extensometer has a 25mm gauge length with a travel of +12.5mm to -2.5mm giving +50% to -10% strains.
It includes an extender to give a gauge length of 50mm and strain of +25% to -5% strain.
Temperature range: -80C to +200C. Compatible with 8800 and 8500Plus controllers.
May be immersed in acetone, silicone or alcohol.
Wide operating temperature range, from -80 °C to 200 °C (-112 °F to 392 °F)
Designed to meet the requirements of ISO 9513, BS 3846 and ASTM E 83
This guide provides instructions on how to use your system components and controls, procedures for setting limits, calibration and other frequently performed operating tasks.
Peel angle: Settable at 30, 45, 60, 90, 120, 135 or 150 degrees.
Fitting: Type Om (12 mm connection with 6 mm clevis pin). Maximum operating temperature : 60°C (140°F).
The miniature variable angle peel fixture is designed for determining the bond and peel strength of microelectronics components like copper runners, films, tapes etc. when peeled from circuit board, substrates or components.
Through the use of a special linkage system, the peel angle is maintained constant during the test.The substrate or component is clamped to the table of the fixture via an "up-down" clamping system.
The moving table is then attached to the actuator or crosshead of the test system. The motion of the actuator or crosshead creates movement on the clamp base but only peel forces are sensed and recorded.
| Capacity | 1 kN (225 lbf) |
| Lower Fitting | 6mm clevis pin (Type Om) |
| Notes | Peel angles of 30,45,60,90,120,135 and 150 deg. |
| Temperature Rating | 10 - 60 °C (50 - 140 °F) |
| Upper Fitting | Requires upper grip |
Capacity: 100 kN (20,000 lb, 10,000 kg)
Upper and lower fittings: Type Dm (1.25 in connection with 1/2 in clevis pin)
Maximum specimen thickness: 40 mm (flat)
Maximum specimen width: 75 mm (flat)
Maximum specimen diameter: 50 mm (round)
Clamping length: 70 mm
Temperature range: ambient only
Requires faces
Includes an air distribution kit with both, 1/4 NPTM (7/16-20), and 1/4 inch hose barb end connections
An Automatic Air Control Kit or Footswitch is recommended
The Pneumatic Wedge Action Grips, available in 100 or 200 kN, provide a convenient method of clamping both large round and flat specimen shapes, up to a 50 mm (2 in) diameter, or flat specimens up to 40 mm (1.57 in) thick respectively. V-face grips are used for round specimens by design and have a reduced area at the center that compromises their ability to absorb high-energy breaks without fracture. This grip uses a split V-face configuration that allows the break energy to be dissipated without damaging the faces.
Biaxial Extensometer 25 mm Axial Gauge Length providing two independent axial and one transverse strain measurement.
Features:
Transverse Travel +/- 0.5 mm (Strain range depends on specimen width)
The extensometer provides 2 independent axial outputs along with a single transverse output and requires 3 sensor channels. It has electrical calibration and is self-identifying with 3300, 3400, 4200, 4300, 4400, 4500, 5500, 5800, 5900, 6800, 8500, 8800 Tower, and 8800MT Series Systems.
These bi-axial and averaging axial clip-on extensometers use strain gauges for measurement and are constructed from high-strength aluminum, titanium, and stainless steel. All of the extensometers feature simple, single-handed operation. The extensometer incorporates automatic electrical calibration and transducer recognition including a unique digital serial number.
The Custom Solutions group at Instron has been developing accessories for unique thermal applications to meet our customers’ unique needs for decades. Your specimen acts differently in different environments and your testing should match, that's why we will develop thermal testing accessories that allow the ultimate flexibility in testing. Whether your testing in super cooled or extremely heated environments using a new frame or using your current set-up, we will work diligently to understand your goals and ensure they are met or exceeded. Please browse the gallery above to see some of our recent projects.
Click here to see our existing customized thermal solutions specific applications.
Biaxial Extensometer 25 mm Axial Gauge Length providing one averaged axial and one transverse strain measurement.
Features:
Meets ASTM E82 B-1, ISO 9513 grade 0.5 and ISO 527 (annex C)
Transverse Travel: +/-0.5 mm (Strain range depends on specimen width)
The extensometer provides a single averaged axial output along with a single transverse output and requires 2 sensor channels. It has electrical calibration and is self-identifying with 3300, 3400, 4200, 4300, 4400, 4500, 5500, 5800, 5900, 6800, 8500, 8800 Tower, and 8800MT Series Systems.
These bi-axial and averaging axial clip-on extensometers use strain gauges for measurement and are constructed from high-strength aluminum, titanium, and stainless steel. All of the extensometers feature simple, single-handed operation. The extensometer incorporates automatic electrical calibration and transducer recognition including a unique digital serial number.
Two chucks are provided.
NOTE: Capacity is dependant on specimen geometry. When testing smooth, round specimens, the fixture may not be able to reach full capacity without slippage.
| Accessory Length | 96.5 mm (3.80 in) |
| Lower Fitting | M12x1.75mRH ( ) |
| Specimen Diameter | 9.5 mm (0.375 in) |
| Torque Capacity | 22.5 Nm (200 in-lb) |
| Upper Effective Length | 76.2 mm (3.00 in) |
| Upper Fitting | M12x1.75mRH ( ) |
Designed for low mass and high stiffness, the Instron camera outriggers provide a stable mounting point for high speed cameras whilst preserving the performance of the test system.
Includes 4 individual support fixtures for mounting and adjusting cameras on the sled. Proven design maintains access to the test object from both sides of the sled to facilitate test set up and exchange of test components.
Allows installation of up to 4 cameras with 5kg mass each.
Instron® Crack Opening Displacement transducers are designed
specifically to perform standard ASTM and ISO fracture mechanics
tests (both cyclic and static), covering all common specimen
geometries (CT, SEB, Centre Crack, Arc Shaped).
Each model offers class leading linearity, whilst being rugged
enough to withstand the high energy release common in many
of these applications and can be used at both elevated and sub
ambient temperatures.
These gauges comply with requirements laid down in ASTM E399-09.
Puncture Fixture per ASTM D5748-95, D4649
Capacity: 4.4 kN (1,000 lbf)
Probe: Tip with 0.75 in pear shaped, Teflon coated with 11 in shaft
Clamping ring inner diameter: 4 in
Lower fitting: Type Dm (1.25 in connection with 1/2 in clevis pin)
Upper fitting: Type Om (12 mm connection with 6 mm clevis pin)
Includes a 6 in square specimen cutting template
Suitable for both low force dynamic and static testing along with dental standards ISO 9917, ISO 6872, ISO 4049 or ISO 20795 the low-force 3-Point bend fixture is designed to be compatible with ElectroPuls E1000. The specimen is supported on two lower anvils and the load is applied in the center of the specimen by a single upper anvil. The t-slot base allows adjustment of the lower span from 15 - 80mm (0.59 - 3.15in) allowing for variable specimen lengths and is submersible to be compatible with an optional fluid bath and recirculator.
4-Point Bend Fixture Conversion Kit (2810-605): Used to convert 2810-600 from a 3-point to a 4-point bend fixture, the 4-point bend conversion kit has a variable span of 5 - 40mm (0.19-1.57in) and is suitable for both static and dynamic testing. The test specimen is supported on two lower anvils while the load is evenly applied by two upper anvils.
• 3 kN (675 lbf) capacity
• Support span 15 – 80 mm (0.59 – 3.15 in)
• Bend testing of small components, plastics, wood, and composites
• Specimen shapes: Flat and round
• Suitable for both static & fatigue testing
• Compatible with ElectroPuls E1000
The 3-Point bend fixture is designed to easily provide the capability of a 3-point flexure test; it is suitable for both Dynamic & Static testing. The specimen is supported on two lower anvils and the load is applied in the centre of the specimen by a single upper anvil. The fixture has a variable span from 15 – 80 mm (0.59 – 3.15 in).
1.4" gauge length.
| Gauge Length | mm (1.40 in) |
Digital caliper with carbide standard jaws. Resolution of 0.0005" (0.01mm). Accuracy of ±0.001" (±0.02mm). Repeatability of 0.0005" (0.01mm).
Designed to be used in conjunction with Automatic Data Entry Interface listed separately. Qualifies as one (1) device. Includes case.
Note: This measuring device requires an Automatic Data Entry Interface listed separately for direct entry of measurements into software.
(225,000 lbf, 100,000 kgf)
包含：
上夾具：648 mm (25.5 in)
下夾具：457 mm (18 in)
Combination 1" and 2" Manual Gauge Point Punch.
Includes probes of 7.9 mm (0.31 in) and 11.1 mm (0.44 in) diameter.
Upper fitting: Requires Chuck 2830-036.
Lower fitting: Requires optional support plates with Drip tray S5400A and Support Frame S4427A.
Flat-end puncture probes produce a shear stress in the specimen. The force required to cause shearing as the probe penetrates the specimen relates to texture properties such as firmness and hardness.
(337,500 lbf, 150,000 kgf)
包含：
上夾具：743 mm (29.25 in)
下夾具： 648 mm (25.5 in)
Capacity: 2 kN
Dimensions: 100 mm x 100 mm (3.9 x 3.9 in) plates.
Four geometries:
Upper fitting: Requires optional probe sets.
Lower fitting: Requires Support Frame S4427A, and Drip Tray S5400A
Designed in accordance with international standards such as ASTM E399, E647 & E1820
Rated Capacity: ±50kN Dynamic, 100kN Static
Temperature Range: -50 to 315°C
Includes:
Note: Requires 2780-120 for use with a standard 3119-600 Series Chamber
Fatigue Compact Tension Fixtures for Servohydraulic machines to test crack growth. POD including 2780-118, 2780-119, 2780-120
Requires Jaw Faces, 207 bar (3000psi) grip controller and fatigue rated adapters. Quantity: 2 grips
Includes:
| Accessory Length | 60.3 mm (2.375 in) |
| Lower Fitting | M12x1.75mRH ( ) |
| Specimen Diameter | 10 - 24 mm ( in) |
| Torque Capacity | 57 Nm (500 in-lb) |
| Upper Effective Length | 47.6 mm (1.875 in) |
| Upper Fitting | M12x1.75mRH ( ) |
Heavy Duty Load Frame Support Table for All Dual Column Table Top Models, including extra high, extra wide versions.
Provides convenient working height and leg room for operation while seated. Capacity: 679 kg (1500lb) evenly distributed load. Table top dimension: 762 x 1524 mm (30 x 60 in). Height adjustable from 635 to 813 mm (25 to 32 in).
The 2910-056 heavy-duty load frame support table optimizes the performance of tabletop testing systems by providing stability and increased safety. The support table maintains a level working surface, distributes the weight of a dual column electromechanical tabletop load frame, and establishes improved ergonomic conditions for users.
Set includes:
| Accessory Length | 94.6 mm (3.725 in) |
| Lower Fitting | M12x1.75mRH ( ) |
| Specimen Diameter | 6.30 - 14.25 mm (0.2500 - 0.5625 in) |
| Torque Capacity | 225 Nm (2000 in-lb) |
| Upper Effective Length | 82.6 mm (3.250 in) |
| Upper Fitting | M12x1.75mRH ( ) |
Averaging Extensometer 1 in Axial Gauge Length providing a single averaged axial output.
Features:
The extensometer provides a single averaged axial output. It has electrical calibration and is self-identifying with 3300, 3400, 4200, 4300, 4400, 4500, 5500, 5800, 5900, 6800, 8500, 8800 Tower, and 8800MT Series Systems.
These bi-axial and averaging axial clip-on extensometers use strain gauges for measurement and are constructed from high-strength aluminum, titanium, and stainless steel. All of the extensometers feature simple, single-handed operation. The extensometer incorporates automatic electrical calibration and transducer recognition including a unique digital serial number.
+/- 2.5 mm travel
For general purpose transverse or diametral strain measurement
on axially loaded specimens. Used for measurement of Poisson's ratio
on anisotropic materials like many composites and similar applications.
Specifications:
W-E404 Series Transverse Extensometers are designed for measuring transverse displacements. They are self-supporting on the test specimen and will work on any width or diameter specimen from 0 to 25 mm(1 in).
Capacity: 10 N (2 lb, 1 kgf).
Temperature range: -10 °C to 80 °C (14 °F to 176 °F). Maximum specimen width: 3 mm (0.12 in).
Maximum specimen thickness: 0.8 mm (0.03 in).
Weight without lock ring: 45 g.
Weight with lock ring: 80 g.
Upper and Lower fitting: Type Om (12mm connection with 6mm clevis pin).
Grips have one fixed and one moving face and provide a convenient method for clamping miniature specimens.
A large access area for repeatable and accurate specimen alignment is provided, making the grips suitable for testing of miniature specimens like fine wires, thin films or single filaments.
Foot switch actuation means the operator´s hands are free for accurate specimen placement in the grip. The grip is made of lightweight material and is suitable for both monotonic and low cyclic fatigue testing.
Requires an automatic air control kit.
| Capacity | 0.01 kN (2 lbf) |
| Lower Fitting | 6 mm clevis pin (Type Om) ( ) |
| Temperature Rating | -10 to +80 °C (14 to +176 °F) |
| Upper Fitting | 6 mm clevis pin (Type Om) ( ) |
Provides an integrated polycarbonate based guard with a hinged door to prevent operator access to test space when the E1000 is at high power. The guard is also designed to minimize hazards associated with specimen failure.
Includes interlock with ElectroPuls controller to prevent the instrument being switched into high power mode whilst the door is open. Also includes key-switch to over-ride the interlock in extreme cases allowing the machine to operate at high power with the guard door open.
NOTE: Only compatible with 8800 Tower controller
| Accessory Depth - Door Closed | 481 mm (18.9 in) |
| Accessory Depth - Door Open | 886 mm (34.9 in) |
| Accessory Height - Door Closed | 876 mm (34.5 in) |
| Accessory Height - Door Open | 876 mm (34.5 in) |
| Accessory Width - Door Closed | 835 mm (32.9 in) |
| Accessory Width - Door Open | 932 mm (36.7 in) |
The quick clamping mechanism allows standardized mounting of any type of structures to the sled. The installation and set-up of the test object can be carried out in preparatory rooms on pallets. The configured pallets are transported to the test sled by a crane and clamped on the sled in just a few minutes.
The pallets can be standardized universal pallets for component tests or pallet frames for the construction of reinforced body shells. Standardized pallets may be used or customers may adapt their own fixtures and test bucks to the Instron quick-clamp system.
Furthermore, the pallet design with the necessary interfaces to the INSTRON quick clamping mechanism can be developed by the test laboratory.
Back to CSA.
Dynamic Extensometer for direct strain measurement and closed loop strain control. Suitable for tensile, compressive & fatigue testing, the extensometer has a 10mm gauge length with a travel of ±1mm giving ±10% strain.
It includes a 15mm extender to give a gauge length of 25mm and ±4% strain and a 40mm extender to give a gauge length of 50mm and strain of ±2%.
Temperature range: -80C to +200C. Compatible with 8800 and 8500Plus controllers. May be immersed in acetone, silicone or alcohol.
Wide operating temperature range, from -80 °C to 200 °C (-112 °F to 392 °F)
Designed to meet the requirements of ISO 9513, BS 3846 and ASTM E 83
This guide provides instructions on how to use your system components and controls, procedures for setting limits, calibration and other frequently performed operating tasks.
+/- 0.10 in travel
For general purpose transverse or diametral strain measurement
on axially loaded specimens. Used for measurement of Poisson's ratio,
on anisotropic materials like many composites and similar applications.
Specifications:
W-E404 Series Transverse Extensometers are designed for measuring transverse displacements. They are self-supporting on the test specimen and will work on any width or diameter specimen from 0 to 25 mm(1 in).
Dynamic Extensometer for direct strain measurement and closed loop strain control. suitable for tensile, compressive & fatigue testing, the extensometer has a 12.5mm gauge length with a travel of ±2.5mm giving ±20% strain.
It includes a 12.5mm extender to give a gauge length of 25mm and ±10% strain and a 37.5mm extender to give a gauge length of 50mm and strain of ±5% strain.
Temperature range: -80C to +200C. Compatible with 8800 and 8500Plus controllers. May be immersed in acetone, silicone or alcohol.
Wide operating temperature range, from -80 °C to 200 °C (-112 °F to 392 °F)
Designed to meet the requirements of ISO 9513, BS 3846 and ASTM E 83
This guide provides instructions on how to use your system components and controls, procedures for setting limits, calibration and other frequently performed operating tasks.
Capacity: 2 kN
Dimensions: 57.32 mm (2.26 in) diameter x 86 mm (3.39 in) long.
Fitting: 6 mm clevis, male.
| Lower Fitting | Requires suitable lower anvil or support plate ( ) |
| Upper Fitting | 6 mm Clevis Pin (Type Om) ( ) |
Supports data acquisition for only one transducer (strain gage bridge, LVDT, or +/-10V BNC input).
Includes:
Note: Not recommended for customer installation to an existing tower. Always include service time when quoting as an accessory.
150 kN (15,000 kg, 33,750 lb) capacity T-Grip Bodies
Digital micrometer with flat anvils for measuring outside diameter and thickness. Resolution of 0.00005" (0.001mm). Accuracy of ±0.0001" (±0.002mm). Designed to be used in conjunction with Automatic Data Entry Interface listed separately. Qualifies as one (1) device. Includes case.
Note: This measuring device requires an Automatic Data Entry Interface listed separately for direct entry of measurements into software.
During tests carried out on servohydraulic machines, elements of the system are subject to acceleration. As a result, in addition to the force applied to the specimen, the load cell also reads forces resulting from its own movement and the mass of the grips and fixtures attached to it.
Dynacell is the world's first truly dynamic load cell, designed from the outset for measuring dynamic loads. Dynacell introduces the following advantages:
Dynacell utilises an accelerometer right at the heart of the load cell, directly on the load axis. This removes the risk of errors in the acceleration reading resulting from off-center loading.
This has the following advantages:
The conditioning of the acceleration signal from the Dynacell is handled as standard in the FastTrack 8800 electronics, and is set-up automatically when the system is autotuned. This means that time is saved and operator errors reduced.
For users who wish to do this themselves, they have the option to switch this feature on or off and set the correction factor manually.
The resulting signal is then subtracted from the load cell signal to produce the true force on the specimen.
Application Range
Products
| Item Name | Cat # |
|---|---|
| Dynacell - Dynamic Load Cell ±250 N (±56 lbf) |
2527-131 |
| Dynacell - Dynamic Load Cell ± 2000 N (± 450 lbf) |
2527-129 |
| Dynacell - Dynamic Load Cell ± 5000 N (± 1125 lbf) |
2527-153 |
| Dynacell - Dynamic Load Cell ±1 kN (±225 lbf) |
2527-130 |
| Dynacell - Dynamic Load Cell ±10 kN (±2250 lbf) |
2527-102 |
| Dynacell, Dynamic Load Cell; +/-25 kN (5620 lbf) |
2527-101 |
| Dynacell, Dynamic Load Cell; +/- 50 kN (11250 lbf) |
2527-100 |
| Dynacell, Dynamic Load Cell; +/-100 kN. (22500 lbf) |
2527-111 |
| Dynacell, Dynamic Load Cell; +/- 250 kN (56250 lbf) |
2527-115 |
| Dynacell, Dynamic Load Cell; +/- 500kN (110 kips) |
2527-125 |
| Dynacell, Dynamic Load Cell; +/- 1MN (220 kips) |
2527-120 |
| Dynacell, Dynamic Load Cell +/-2.5MN (550 kips) |
2527-140 |
Axial Clip-on Extensometers
Pneumatic Power Supplies for Grips
An electric pump charges the integral storage tank with compressed air. Grips are connected to the compressor via an optional airkit which may also include a footswitch for opening and closing the grips.
Pneumatic pressure to the grips is adjusted with the pressure regulator included with the compressor. A filter ensures clean air is supplied to the grips.
| Item Name | Cat# |
|---|---|
| Air Compressor, Portable; Line Voltage: 240 VAC | 2810-060 |
Socket Style Torsion Grips
These socket style adapters allow the connection of any 0.5 inch drive socket or accessory directly to the torque cell and/or output shaft on the MT series frames. Smaller drive sockets can be connected through the use of reducing adapters.
English and Metric sockets sets are available in a large range of sizes that allow the testing of fasteners or finished products that have a hex type connection. These adapters are useful for testing the running torque of locking and non-locking fasteners, proof testing of fasteners with torsional loading, or checking the torsional resistance of ratchet, torque wrench, or other type of tool.
The Socket Style grip adapters are threaded into or bolted to the output shaft and/or torque cell on the MT series frames. A jam nut is used to fix the threaded adapter in place and maintain it tight for bi-directional testing.
The socket is then pressed onto the adapter and is retained by a spring loaded ball just like any commercial ratchet. Two sockets can be used for testing bolt and nut specimens, or just one socket can be used to tighten or loosen fasteners in parts that must be held in a custom fixture.
| Item Name | Cat# |
|---|---|
| 0.5 in Socket Drive Torsion Grips, English | W-MT03 |
| 0.5 in Socket Drive Torsion Grips, Metric | W-MT03-M |
Mechanical Wedge Grips for Fatigue Testing
Instron mechanical wedge action grips may be used in static or dynamic materials testing applications, interchangeable wedge-shape grip faces accommodating either flat or round specimens.
The grip is designed to allow test specimens to be securely gripped without introducing axial
pre-loading to the specimen. This is achieved by using jaw faces that move in a horizontal
direction only, relative to the specimen.
Each grip is mechanically operated, gripping force being applied via movement of the grip body relative to the wedge shaped jaw faces. This movement is induced by the tightening of four socket cap screws on the underside of the grip head.
Each jaw face is located in the grip body by two extension springs, which allow the jaw faces to release the specimen after testing.
The grip body wedge area is fitted with jaw guides, to ensure that the jaw faces remain
square to each other and to the specimen.
| Item Name | Cat# |
|---|---|
| Fatigue Rated Mechanical Wedge Grips (+/- 100 kN) | 2743-402 |
| 2742-102 ±1 kN Mechanical Fatigue Grips | 2742-102 |
| 2742-316 ±10 kN ±100 Nm Mechanical Fatigue Grips | 2742-316 |
| 2742-206 ±3 kN ±25 Nm Mechanical Fatigue Grips | 2742-206 |
Mechanical Wedge Action Grips (Lever Operated)
T-Grip Holders are available in load capacities from 22.2 to 150 kN (5,000 to 33,750 lbf.) These economical and versatile assemblies are designed for simplified specimen insertion and removal, a feature that saves time and reduces operator fatigue, increasing productivity in repetitive testing operations.
Engineered to be adaptable to both hydraulic and electromechanical UTM's, most T-Grip Jaw Holders are available with an open front style that assists with simple insertion and removal of test specimens.
An assortment of interchangeable jaws will fit in the T-Grip holders, which allows for the acceptance of a range of sizes in both flat and round specimens. To increase the ease of operation, the locking mechanism of the lower holder keeps the grip jaws open so that one-handed specimen insertion is possible.
The upper and lower grip bodies are structurally the same. Each grip body has a pocket that holds a pair of grip jaws and utilizes a wedge design. This wedge design causes the grips to further tighten as load on the specimen is applied, reducing occurrences of slippage.
T-Grip Holders are available with two types of actuation, lever/spring or screw type.
All capacities of T-Grips are offered with lever/spring actuation, which uses a lever to raise and lower the jaws in the grip pocket and a spring to provide the initial clamping force on the specimen. When loading a specimen, the operator locks the bottom jaw open, then opens the upper jaw and places the top half of the specimen inside. Once the specimen is clamped securely within the upper jaw, the operator positions the bottom half of the specimen into the lower grip jaws and unlocks the jaws, providing clamping force and securing the specimen so that the test may be conducted.
In the screw type actuation (offered in the 20,000 pound capacity model), a mechanical screw actuator, which is operated manually by turning a handle, opens and closes the grip jaws. This screw actuation provides a more secure initial gripping force and is ideal for hard materials testing where occurrences of slippage are prevalent.
| Item Name | Cat# |
|---|---|
| Lever Action, Mechanical Wedge Grips; Capacity: 100 kN | W-5021 |
| Lever Action, Mechanical Wedge Grips; Capacity: 150 kN | W-5151 |
| Lever Action Mechanical Wedge Grips Capacity 150 kN | W-5057-A |
Electropuls All-Electric Dynamic Test Systems
| Item Name | Cat# |
|---|---|
| Safety Guard for ElectroPuls E1000 Test Instrument | 1300-301 |
| Safety Guard for ElectroPuls E3000 Test Instrument | 1300-304 |
| Safety Guard for ElectroPuls E10000 Test Instrument | 1300-303 |
| Safety Guard for ElectroPuls E20000 Test Instrument | 1300-305 |
| High Stiffness Support Table For ElectroPuls Test Instruments | 1300-311 and 1300-315 |
3 and 4 Point Fatigue Flexure Fixtures
The flexure fixture allows a variety of flexural and fracture toughness bond tests to be performed, including determination of flexural modulus, flexural strength and flexural yield strength.
Easy to install, the 3 point fixture can be modified with an optional conversion kit to provide a 4 point bending conversion.
Lower anvils are adjustable to accommodate specimens of different spans. Deflection of the specimen can be measured either through crosshead displacement, or for more precise measurement use the mid span direct measurement deflectometer plunger with clip on extensometer.
T
The specimen is supported on two precision machined (free to rotate or stationary) anvils of a defined radius. The force is applied either centrally (3 point) or at a defined distance either side of the center (4 point). The support beam is graduated lengthways in metric units for accurate positioning of the anvils, equally spaced to the center line.
This feature also applies to the 4 point loading beam and anvils.
| Item Name | Cat# |
|---|---|
| 100 kN Flexure Fixture, Fatigue 3 Point | 2810-181 |
| 250 kN Flexure Fixture, Fatigue 3 Point | 2810-200 |
| 500 kN Flexure Fixture, Fatigue 3 Point | 2810-250 |
| 10 kN Flexure Fixture, Fatigue 3 Point | 2810-500/505 |
| 3 kN Flexure Fixture, Fatigue 3 Point | 2810-600/605 |
Air cushion isolators for 8800 Series
| Item Name | Cat# |
|---|---|
| Air Cushion Isolators for Testing Frequencies Above 15Hz | 1300-008 |
| Isolation Mounts for 8801 or 8516 (1 set); For Testing Frequencies Above 15Hz. | 1300-009 |
Paper and paper board testing is important to the pulp and paper industry because of the demands placed upon it for a wide range of applications.
In printing, for example, paper is handled from either cut sheets or rolls (webs) and the tensile strength and elongation properties must meet stringent customer requirements. In packaging, testing of corrugated paper is performed to measure the resistance of edgewise compression.
| Item Name | Testing Standards | Cat# |
|---|---|---|
| TAPPI T541 Internal Bond Strength of Paperboard. Z-Direction Tensile. | TAPPI T541 | S1-11814 |
Chuck Style Torsion Grips
These universal drill-type chuck grips can be used to hold round, hex or triangular specimens. The standard sets are available in both a keyless and keyed style that can hold a range of specimen sizes.
Keyless operation lets you rapidly grip and release specimens. A comfortable, sure-grip sleeve allows you to hand-tighten the chucks.
Keyed operation provides fast, easy tightening as well as quick, nonstick release.
The Chuck Style grips are threaded into or bolted to the output shaft and/or torque cell of MT series frames.
The chuck grips spin closed to clamp specimens during torsion testing. The jaws of these grips extend well beyond the chuck nose to accept a broad range of wires, cables, and cylindrical specimens. Both keyed and keyless chucks are available for gripping a variety of specimen diameters and include adapters for mounting to an MT series frame.
| Item Name | Cat# |
|---|---|
| 0.375 in Keyed Drill-Type Chuck Assembly | W-MT01-B |
| 0.375 in Keyless Drill-Type Chuck Assembly | W-MT01 |
Axial-Torsion Wedge Grips
The major grip components are the grip driver, wedge grip head, grip attachment flange and jaw faces.
The grip driver applies the clamping force to the grip head by moving it relative to the jaw faces.This causes the the jaw faces to clamping the specimen.
The grip drive also incorporates 3 sets of anti-rotation sliders that transfer any applied torque from the actuator to the grip and specimen. The jaw faces are either serrated or V-grooved to accommodate flat or cylindrical specimens.
| Item Name | Cat# |
|---|---|
| 25kN / 100Nm Fatigue Rated Hydraulic Wedge Action Grips for 8874 Machine | 8260C |
8800 Series Digital Controller Strain Conditioners
In order to input the signal from an optional extensometer or other strain transducer, it is necessary to have a strain channel fitted to the 8800 controller.The strain channel provides excitation and signal conditioning for strain gauge and LVDT devices and can also accept high level 0-10V analog input signals.
Two versions are available, one for monitoring only and one for monitoring and control.Required for strain input to FastTrack 8800 controllers from optional strain measurement transducers
The strain channel provides excitation and signal conditioning for strain gauge and LVDT devices and can also accept high level 0-10V analog input signals.
Two versions are available, one for monitoring only and one for monitoring and control.
In order to input the signal from an optional extensometer or other strain transducer, it is necessary to have a strain channel fitted to the 8800 controller.
| Item Name | Cat# |
|---|---|
| Strain Conditioner - 8800MT Series (Control & Data Acquisition) | 8800-621 |
| Strain Conditioner for 8800MT Series (Data Acquisition only) | 8800-622 |
Specimen Measurement Devices
A variety of specimen measurement devices can be purchased to provide digital measurement, digital measurement with automatic data entry, or manual measurement.
Specimen measuring with digital instruments, such as calipers and micrometers, provide accurate measurement. They can be purchased in a variety of measuring ranges. When purchased with the automatic data entry interface, the instrument will send the digital measurement directly to the controlling software that is being used to run the test. No manual entry is needed. These instruments are compatible with Bluehill®, Merlin™, Partner™ and Series IX™ advanced materials testing software.
Various manual measurement devices are available for post-test determination of specimen elongation or reduction of area. Percent elongation scales (both standard and telescoping are available) measure the elongation of flat specimens and a reduction of area gauge measures the reduction of area of a round specimen.
Digital transfer of data from the measuring instrument to the software is accomplished with an automatic data entry interface. This interface translates and routes data from the instrument with an RS-232 output and connecting cables to the controlling software.
The reduction of area and percent elongation devices operate similar to a ruler or sliding scale ruler.
Specimen Marking Punches
| Item Name | Cat# |
|---|---|
| Manual Gauge Point Punch | W-6714 |
| Manual Gauge Point Punch | W-6771 |
| Manual Gauge Point Punch, 0.5 in Gauge Length | W-6718 |
| Extra Punch Points , Set of Two | W-6709 |
| Manual Gauge Point Punch | W-6719 |
| Manual Gauge Point Punch | W-6771-B |
Hydraulic Wedge Action Grips
Hydraulic wedge action grips feature an open front design, which facilitates easy loading of large specimens. This series can accommodate round specimens up to 90 mm (3.54 in) in diameter and flat specimens up to 90 mm (3.54 in) thick with capacities ranging from 300kN (67,500 lbf) to 2000kN (450,000 lbf).
Specially suited for industrial environments where dust and metal chips may be present, these grips have protective dust covers that fit easily over the faces to shield the moving surfaces. Optional adapter plates furnish an efficient method for mounting secondary load strings for lower capacity testing or other fixturing without removing the larger grip.
Elastomeric "O" ring Fixtures
| Item Name | Cat# |
|---|---|
| "O" Ring Test Fixture, Standard & Extra Height Table Top Test Systems | 2717-078 |
| Elastomeric "O" Ring Test Fixture, Single Column Systems | 2717-068 |
| Gauge length | 最大行程 | 目錄編號 |
| 5 公釐（0.20 英吋） | 2 公釐（0.08 英吋） | 2670-130 |
| 10 公釐（0.39 英吋） | 4 公釐（0.16 英吋） | 2670-132 |
Instron 的食品夾具涵蓋了廣泛的行業標準測試方法，包括壓縮、穿刺、剪切和擠壓。提供多種砧座、探頭、剪切、擠壓和彎曲夾具，可用於研發、品質保證和製程控制測試。Instron 提供的食品夾具採用耐腐蝕且耐用的材料設計。所有夾具都可以安裝在滴水盤中，以幫助在評估潮濕、多汁或易碎食品的質地時保持測試區域清潔。
| 項目名稱 | 上部配件 | 下部配件 | 型號 |
|---|---|---|---|
| 三爪夾頭 | 6 毫米 U 形銷 (Om 型) | 「僅限上部」 | 2830-036 |
| 球頭探針，5 件套 | 需要三爪夾頭 2830-036 | 需要滴水盤 S5400A 和支撐架 S4472A | S5410A |
| 壓縮砧座，2580 毫米 (4 英吋) 方形區域 | 6 毫米 U 形銷 (Om 型) | 需要合適的下部砧座或支撐板 | S5402A |
| 平面剪切刀片 | 6 毫米 U 形銷 (Om 型) | 需要 S5406A 或 S5401A | S5409A |
| 食品夾具滴水盤 | 需要食品夾具 | 0.5 英吋 U 形銷 (dm 型) | S5400A |
| 食品夾具支撐架 | 需要食品夾具 | 滴水盤 S5400A | S4427A |
| 穿刺探針組 | 三爪夾頭 | 「僅限上部」 | 2830-005 |
| 穿刺探針組，Magness-Taylor | 三爪夾頭 | 「僅限上部」 | 2830-015 |
| 樣品支撐板組 | 需要選購的食品探針 | 需要滴水盤 S5400A 和支撐架 S4472A | S5401A |
Elasticated Fabric Grips
Fabric Loop Grips are used for tension and elongation testing of wide or narrow elastic fabrics. This test is performed with various types or combination of materials, and tested at a constant-rate-of-extension. Loop Tension at specified Elongation and Elongation at Specified Loop Tension are test procedures that require 3 cycles to bring the specimen under test to a specified point and returned to a zero value as described in ASTM D 4964.
| Item Name | Cat# |
|---|---|
| Fabric Loop Grips | 2717-080 |
Specimen Preparation Systems
Proper preparation of the specimen is a critical process for accurate material characterization. An appropriate preparation of the specimen as well as adequate notching will affect the final test results by generating reliable outcomes in the finish product performances. This can be accomplished by several specimen preparation techniques which abide by the main ISO and ASTM international standards. Instron offers an extensive range of notching, milling, and punching machines designed to prepare specimens from thick to thin as well as from soft to hard.
Please refer to this document for a complete overview of the available models.
Designed as either manual or automatic devices, these specimen preparation instruments allow for easy and fast preparation of the specimens testing operations ensuring the most accurate results and increased production cycles.
Plastics, rubbers, elastomers, reinforced plastic materials, film, and thin sheets of various materials
| Item Name | Cat# |
|---|---|
| CEAST Specimen Preparation Notching Machines | C-6897-000, C-6898-000, C-6899-000 |
| CEAST Specimen Preparation Punching Machines | C-6051-000, C-6054-000 |
Hydraulic Grip Controls for 8800 Series
| Item Name | Cat# |
|---|---|
| Hydraulic Grip Controls for Servohydraulic Test Systems | 2718-111 |
Loadframe Support Tables/Bases
| Item Name | Cat# |
|---|---|
| Load Frame Support Base/Extension | 2910-064 |
| Heavy Duty Support Table | 2910-056 |
| High Stiffness Support Table For ElectroPuls Test Instruments | 1300-311 and 1300-315 |
Collet Style Torsion Grips
The Collet Style grips are threaded into or bolted to the output shaft and/or torque cell of MT series frames.
The collet grips use a split collet design that, when manually tightened, provides nearly uniform clamping pressure on the specimen. Collet Style grips accept a smaller range of specimen diameters than chuck style grips (W-MT01 Series) but can withstand higher torsional forces. Both small and large collet grip assemblies are available for gripping a range of specimens. Adapters are included to attach collet grips to the MT series frames.
Biomedical / Pharmaceutical Fixtures
Instron is the world leader in biomedical and pharmaceutical material testing and offers a full suite of test fixtures to meet all the needs of this industry.
Microelectronic
Fixtures
Tens of millions of consumer electronic devices are tested by Instron systems each year. This selection of fixtures enables tensile, compression, shear, and bend tests to be performed on devices, components, and materials.
Composite Fixtures
Fixtures for testing composite materials for tension, compression, flexure, shear and peel. Most of these fixtures are designed to meet specific materials testing standards.
Foam Compression Fixtures
Compression fixture designed per testing standards ASTM D3574 (Indentation Force Deflection of Cellular / Urethane Foams) , ASTM D5672, and EN ISO 2439:2000.
More Info
Wood Fixtures
Fixtures for testing wood for adhesive bond strength, compression, bend strength, shear, tensile strength, etc.
Food Testing Fixtures
Food fixtures cover a wide range of industry standard testing methods including compression, puncture, shear, and extrusion.
More Info
Custom Fixtures
The Custom Solutions group at Instron has been developing unique fixtures to meet our customers’ specific needs for decades.
Instron 靜態荷重元專為搭配我們的 6800、3400、5900 和 3300 Series測試系統使用而設計。靜態荷重元的容量範圍從 2.5 N 到 600 kN，適用於各種測試應用，包括拉伸、壓縮、循環和反向應力測試。。
Fastener holders in combination with washers, short bolt adapters, and nut proof loading assemblies allow you to perform static tensile testing of external or internal threaded fasteners. The fastener holder sets are capable of axial and wedge proof loading, tensile testing, and nut proof load testing in accordance with ASTM F606.
| Available Models | ||||
| Description | Rated Capacity | Maximum Specimen Diameter | Adapting Thread Size | Catalog No. |
| Series A Fastener Holders, Type Dm | 100 kN | M12 | Upper and Lower Fitting: Type Dm | W-5155M-A |
| Series A Fastener Holders | 150 kN | M12 | M36 (Type R4) Female | W-5155-A |
| Series B Fastener Holders | 600 kN | M24 | M48 (Type II RH) Female | W-5155-B |
| Series C Fastener Holders | 1000 kN | M72 | M72 (Type IIA RH) Female | W-5155-C |
| Series D Fastener Holders | 1500 kN | M48 | M72 (Type IIA RH) Female | W-5155-D |
| Available Models | |||
| Description | Compatible Holder Series | Specimen Diameter | Catalog No. |
| Plain Flat Washers | Series A Series B Series C Series D |
0 to 12 mm 0 to 24 mm 0 to 36 mm 6 to 48 mm |
W-5120-A W-5120-B W-5120-C W-5120-D |
| 10° Plain Wedge Washers | Series A Series B Series C Series D |
0 to 12 mm 0 to 24 mm 0 to 36 mm 0 to 48 mm |
W-5121-A W-5121-B W-5121-C W-5121-D |
| 6° Plain Wedge Washers | Series A Series B Series C Series D |
0 to 12 mm 0 to 24 mm 0 to 36 mm 0 to 48 mm |
W-5122-A W-5122-B W-5122-C W-5122-D |
| 4° Plain Wedge Washers | Series A Series B Series C Series D |
0 to 12 mm 0 to 24 mm 0 to 36 mm 0 to 48 mm |
W-5123-A W-5123-B W-5123-C W-5123-D |
| Countersunk Flat Washer to Test 60° | Series A Series B Series C |
0 to 12 mm 0 to 24 mm 0 to 36 mm |
W-5139-A W-5139-B W-5139-C |
| Countersunk Flat Washer to Test 82° | Series A Series B Series C |
0 to 12 mm 0 to 24 mm 0 to 36 mm |
W-5138-A W-5138-B W-5138-C |
| Countersunk Flat Washer to Test 100° | Series A Series B Series C |
0 to 12 mm 0 to 24 mm 0 to 36 mm |
W-5137-A W-5137-B W-5137-C |
| Threaded Flat Washers | Series A Series B Series C Series D |
0 to 12 mm 0 to 24 mm 0 to 36 mm 0 to 48 mm |
W-5144-A W-5144-B W-5144-C W-5144-D |
| Available Models | |||
| Description | Compatible Holder Series | Specimen Diameter | Catalog No. |
| Tophat Style Adapters | Series A Series B Series C Series D |
0 to 6 mm 0 to 12 mm 0 to 18 mm 6 to 24 mm |
W-5131-A W-5131-B W-5131-C W-5131-D |
| Dumbbell Style Adapters | Series A Series B Series C Series D |
6 to 12 mm 12 to 24 mm 18 to 36 mm 24 to 48 mm |
W-5132-A W-5132-B W-5132-C W-5132-D |
| Available Models | ||
| Compatible Holder Series | Available Thread Size Range | Catalog No. |
| Series A | M3 to M12 | W-5133-A |
| Series B | M3 to M24 | W-5133-B |
| Series C | M3 to M36 | W-5133-C |
| Series D | M3 to M45 | W-5133-D |
| Available Models | |
| Description | Catalog No. |
| Adapters for Attaching Series B to Series C or D Fastener Holders | W-5119-B |
剪切工装旨在测试紧固件承受横向施加到紧固件杆上的载荷的能力。单剪工装可用于剪切拉力试验。双剪工装可用于剪切压缩试验。
For Fatigue Testing Systems
Our standard furnaces and load string assemblies for fatigue testing systems allow for testing up to 1000°C in air. Our engineered solutions group is also able to develop solutions to meet higher temperature requirements and additional furnace dimensions.
Designed for low cycle fatigue testing, this three-zone split tube furnace features durable embedded heating elements, high efficiency insulation, and a side entry extensometer port.
| Related Accessories | |||
| Description | Catalog No. | ||
| Furnace Controller and Software | 3117-301 3117-302 |
||
Designed for elevated temperature low cycle fatigue applications in addition to hot tensile testing and other reverse axial stress applications.
| Specifications | |||
| Maximum Pressure | 130 bar | ||
| Maximum Operating Temperature | 1050°C (1922°F) | ||
| Related Accessories | |||
| Description | Catalog No. | ||
| Electrically Operated Pump | 3117-503 | ||
2742-205机械楔形夹具® 专为ElectroPuls试验机而设计，适用于各种试样和材料的拉伸、压缩和反向应力测试。夹具直接通过机器手柄进行气动操作，前开式设计便于样品插入、定位和夹紧。
操作原理这些夹具的仅楔形夹体作用的原理旨在不施加压缩载荷的情况下夹紧试样，否则可能导致试样屈曲。夹体的收缩运动有助于减少通常在夹紧试样时产生的压缩载荷。
前开式设计允许快速轻松地更换试样和夹面。夹面可优化夹持性能，锯齿夹面旨在最大限度地减少对试样表面的损伤。
应用范围
Spherically seated compression platens are designed to accommodate compression specimens with surfaces that are not completely parallel. During the application of a small pre-load, the spherically seated compression platens self-align up to 4° to the top of the specimen with reference to the machine’s loading axis. For some models, the spherical seat is integral to the compression platen. For others the spherical seat can be added to convert a compression platen to a spherically seated platen.
The hardened surface of these platens ensures no deformation of the platen occurs during testing while the polished finish minimizes friction between the platen and specimen. Platens that have a 100 mm or larger diameter include a locking mechanism to secure the spherical seat into position, ensuring it is parallel with the lower platen. An LVDT deflection sensor may be attached to provide high accuracy strain measurement.
| Specifications | ||
| Platen Diameter | Load Capacity | Catalog Number |
| 50 mm | 10 kN | S5722A |
| 50 mm | 100 kN | S5722B |
| 100 mm | 10 kN | S5724A |
| 100 mm | 100 kN | S5724B |
| 150 mm | 10 kN | S5726A |
| 150 mm | 100 kN | S5726B |
| 200 mm | 10 kN | S5728A |
| 200 mm | 100 kN | S5728B |
The Industrial Series spherically seated compression platens offer optimal balance of rigidity and self-alignment, ensuring uniform specimen loading. Compression platen combinations can be configured to comply with ASTM C39, C67, C109, C133, C140, C365, AASHTO T22, and other standards.
| Specifications | ||
| Spherical Seat Diameter | Load Capacity | Catalog Number |
| 79 mm | 1000 kN | W-2005-A |
| 114 mm | 2000 kN | W-2005-B |
| 165 mm | 4500 kN | W-2005-C |
| 228 mm | 4500 kN | W-2005-D |
| 305 mm | 5000 kN | W-2005-F |
An attachment to convert a compression platen to a spherically seated platen.
| Specifications | |||
| Capacity | Lower Fitting | Upper Fitting | Catalog Number |
| 300 kN | 6 x M10 on 100 mm BC | M48 x 2 fRH (Type llf) | 2501-118 |
| Fatigue Rated | |||
| 500 kN Static 250 kN Dynamic |
M48 x 2 fRH (Type llf) | M48 x 2 fRH (Type llf) | 2840-112* |
| * For use with 2840-11x compression platens | |||
2742-103机械楔形夹具® 专为ElectroPuls试验机而设计，适用于各种试样和材料的拉伸、压缩和反向应力测试。夹具直接通过机器手柄进行气动操作，前开式设计便于样品插入、定位和夹紧。
操作原理这些夹具的仅楔形夹体作用的原理旨在不施加压缩载荷的情况下夹紧试样，否则可能导致试样屈曲。夹体的收缩运动有助于减少通常在夹紧试样时产生的压缩载荷。
前开式设计允许快速轻松地更换试样和夹面。夹面可优化夹持性能，锯齿夹面旨在最大限度地减少对试样表面的损伤。
应用范围
Designed as an integral part of the testing platform, in-head wedge grip jaws fit directly into the crosshead pocket of the frame and provide a grip that is adaptable to a variety of testing applications. These jaw faces are made from rugged heat-treated steel designed for durability and minimal maintenance, and are ideal for testing a variety flat, round, and cable specimens in compliance with ASTM E8. The teeth of the jaws are also hardened, and different tooth options increase the application range: a coarse tooth pattern is best for softer materials and higher loads, whereas a finer tooth pattern is best for harder materials. The wedge design causes the gripping force to increase as more tension force is applied. This ensures a secure gripping action with minimal slippage throughout the range of the test.
Filler plates are provided with the purchase of testing frames and allow a variety of specimen thicknesses to be tested. The filler plates adjust the opening of wedge grip jaws by changing the width of the crosshead pocket. All plates should be used for the thinnest specimens and no filler should be used for the thickest specimens.
Flat wedge grip jaw faces are ideal for testing a variety of hard, flat specimens. Specimen sizes can also be varied in width, due to the variety of available grips.
| Available Models | ||||||
| Item Description | Force Capacity | Max Specimen Width | Max Specimen Thickness | Tooth Profile | Teeth Per Inch | Catalog No. |
| Jaw Faces | 300 kN | 50 mm | 25 mm | Horizonal | 16 | W-1214 |
| Jaw Faces | 300 kN | 63 mm | 35 mm | Diamond | 8 | W-1258 |
| Jaw Faces | 300 kN | 63 mm | 35 mm | Diamond | 16 | W-1259 |
| Jaw Faces | 600 kN | 70 mm | 45 mm | Horizonal | 8 | W-1408 |
| Jaw Faces | 600 kN | 70 mm | 45 mm | Diamond | 8 | W-1480-A |
| Jaw Faces | 600 kN | 70 mm | 45 mm | Horizonal | 16 | W-1409 |
| Jaw Faces | 600 kN | 70 mm | 45 mm | Diamond | 16 | W-1409-A |
| Jaw Faces | 1000 kN | 82mm | 50 mm | Diamond | 8 | W-1559 |
| Jaw Faces | 1000 kN | 82 mm | 50 mm | Diamond | 16 | W-1560 |
| Jaw Faces | 1500 kN | 90 mm | 76 mm | Diamond | 8 | W-1660 |
| Jaw Faces | 2000 kN | 100 mm | 76 mm | Diamond | 8 | W-1761 |
| Jaw Faces | 3000 kN | 150 mm | 105 mm | Diamond | 8 | W-1911 |
Vee wedge grip jaw faces are ideal for testing a variety of round specimens. Most of the offered jaw faces can also be produced using through-hardened tool steel, which is suitable for re-bar applications. The variety of available jaws also allows variability in the range of specimen diameters. This versatility is due to the different depths and angles of the vee notch in the jaws available, depending on the specific dimensions of the specimen being tested.
| Available Models | |||||
| Item Description | Force Capacity | Specimen Diameter | Tooth Profile | Teeth Per Inch | Catalog No. |
| Jaw Faces | 300 kN | 5.0 - 13.0 mm | Horizonal | 16 | W-1215-A |
| Jaw Faces | 300 kN | 12.0 - 32.0 mm | Horizonal | 16 | W-1215 |
| Jaw Faces | 300 kN | 12.7 - 40.0 mm | Horizonal | 10 | W-1260 |
| Jaw Faces | 300 kN | 12.7 - 40.0 mm | Horizonal | 16 | W-1261 |
| Jaw Faces | 600 kN | 7.0 - 25.0 mm | Horizonal | 16 | W-1410-A |
| Jaw Faces | 600 kN | 12.7 - 57.0 mm | Horizonal | 10 | W-1410 |
| Jaw Faces | 600 kN | 12.7 - 57.0 mm | Horizonal | 16 | W-1411 |
| Jaw Faces | 1000 kN | 6.0 - 12.7 mm | Horizonal | 16 | W-1563-A |
| Jaw Faces | 1000 kN | 12.7 - 57.0 mm | Horizonal | 10 | W-1561 |
| Jaw Faces | 1000 kN | 12.7 - 57.0 mm | Horizonal | 16 | W-1563 |
| Jaw Faces | 1000 kN | 45.0 - 85.0 mm | Horizonal | 10 | W-1562 |
| Jaw Faces | 1500 kN | 10.0 - 63.0 mm | Horizonal | 8 | W-1669-A |
| Jaw Faces | 1500 kN | 12.7 - 82.0 mm | Horizonal | 10 | W-1662 |
| Jaw Faces | 2000 kN | 10.0 - 63.0 mm | Horizonal | 8 | W-1669-B |
| Jaw Faces | 2000 kN | 32.0 - 95.0 mm | Horizonal | 10 | W-1763 |
| Jaw Faces | 3000 kN | 10.0 - 60.0 mm | Diamond/Horizonal Grip body range from 25 mm (#8) to 60 mm (#18), diamond cut, 10 teeth per inch Grip inserts range from 10 mm (#3) to 25 mm (#8), horizontal cut 10 teeth per inch |
10 | W-1916 |
| Jaw Faces | 3000 kN | 35.0 - 125.0 mm | Horizonal | 10 | W-1912 |
Cable jaw face inserts are ideal for testing seven stranded cable specimens. Cable grip jaws are only available for load frames with a capacity of 600 kN (135,000 lbs) or greater.
| Available Models | |||
| Item Description | Force Capacity | Specimen Diameter | Catalog No. |
| Insert Holders | 2000 kN | W-1538 | |
| Inserts | 2000 kN | 11.11 mm | W-1538-B |
| Inserts | 2000 kN | 12.70 mm | W-1538-C |
| Inserts | 2000 kN | 12.90 mm | W-1538-F |
| Inserts | 2000 kN | 13.20 mm | W-1538-G |
| Inserts | 2000 kN | 15.24 mm | W-1538-H |
| Inserts | 2000 kN | 15.88 mm | W-1538-D |
| Inserts | 2000 kN | 19.05 mm | W-1538-E |
2742-206机械楔形夹具®专为ElectroPuls试验机而设计，适用于各种试样和材料的拉伸、压缩和反向应力测试。2742-205气动楔形夹具®专为ElectroPuls试验机而设计，适用于各种试样和材料的拉伸、压缩、扭转和逆向应力试验。
操作原理夹具上的轴承辅助楔形设计实现了无需工具就可以轻松拧紧夹具。如有必要，这也可以使用撬杆或扳手来完成。在这两种情况下，这种调整都不改变相对于试样的表面的垂直位置。
Instron® 的这种夹体移动，而非夹面的设计，可以预设试样夹持的确切位置，保证标距一致且不施加可能导致试样屈曲的压缩力。前开式设计允许快速轻松地更换夹面。锯齿夹面可实现最佳夹持性能，锯齿设计可最大限度地减少对试样表面的损伤。拉杆也适用于温度试验。
应用范围
操作原理Electropuls拉杆套件包含4个不同长度的拉杆，适用于疲劳、拉伸、压缩和扭转试验。当结合3119-605试验箱在新ElectroPuls试验机（除了E1000）上配置3119-605温度箱使用时，拉杆套件可优化兼容配件，实现最大操作范围。
Compression deflectometers, or linear variable differential transformer (LVDT) displacement transducers are instruments that measure the displacement of the load frames. These measuring devices feature an LVDT as the active element and can be used on electromechanical and hydraulic testing systems.
The 2601 Series Linear Variable Differential Transformer (LVDT) displacement transducers are measuring devices that measure the displacement of the load frames. They are best suited for situations where measuring strain on the specimen is difficult or impossible and can be used on compression and tensile tests. LVDT’s are preferred to crosshead extension readings because they eliminate errors due to frame and fixture compliance. They feature an LVDT as the active element and are designed for use on both electromechanical and hydraulic testing systems.
| Available Models | |||
| Measuring Range | Standard Temperature Range | Catalog No. | |
| +/- 0.5 mm (+/- 0.02 in) | -10 °C to +80 °C (+14 °F to +176 °F) | 2601-041 | |
| +/- 2.5 mm (+/- 0.1 in) | -10 °C to +80 °C (+14 °F to +176 °F) | 2601-042 | |
| +/- 15 mm (+/- 0.6 in) | -40 °C to +100 °C (-40 °F to +212 °F) | 2601-043 | |
| +/- 50 mm (+/- 2 in) | -40 °C to +100 °C (-40 °F to +212 °F) | 2601-044 | |
| +/- 100 mm (+/- 4 in) | -40 °C to +100 °C (-40 °F to +212 °F) | 2601-045 | |
| Accessories | |||
| Description | Catalog No. | ||
| Magnetic Base LVDT Holder | 2601-069 | ||
| LVDT Platen Displacement Fixture | 2601-071 | ||
| Precision Micrometer, 0-50 mm (2 in) for Manual Calibration of LVDTs | 2601-072 | ||
The E-Series strain displacement deflectometers are often used for measuring deflection in 3 and 4 point bend tests, compression tests, and a variety of general test deflection measurements. The unit includes a magnetic base for easy mounting and a standard 25 pin connector.
| Available Models | |||
| Travel | Standard Temperature Range | Catalog No. | |
| 0.15 in | -40°F to 210°F (-40°C to 100°C) | W-E401-A | |
| 1.0 in | -40°F to 210°F (-40°C to 100°C) | W-E401-D | |
| 2.0 in | -40°F to 210°F (-40°C to 100°C) | W-E401-J | |
| 6 mm | -40°F to 210°F (-40°C to 100°C) | W-E401-F | |
| 12 mm | -40°F to 210°F (-40°C to 100°C) | W-E401-G | |
| 25 mm | -40°F to 210°F (-40°C to 100°C) | W-E401-H | |
| Accessories | |||
| Description | Catalog No. | ||
| Magnetic Base LVDT Holder | 2601-069 | ||
2742-102机械楔形夹具®专为ElectroPuls试验机而设计，适用于各种试样和材料的拉伸、压缩和反向应力测试。夹具为机械操作，前开式设计便于样品插入、定位和夹紧。
夹具的楔形作用原理使其可以用手（或用于额外夹持力的扳手）轻松地夹紧到试样上，同时不改变夹面相对于试样的表面的垂直位置。Instron®的这种夹体移动而非夹面的设计，可以预先准确定位试样的夹持点，保证试样标距一致且不施加可能导致试样屈曲的压缩力。
前开式设计允许快速轻松地更换夹面。锯齿状的夹面可实现最佳夹持性能，锯齿设计可最大限度地减少对试样表面的损伤。
提供适用于ElectroPuls设备和其他系统的附件套件。
应用范围
2742-315机械楔形夹具专为ElectroPuls® E10000线性扭转系统而设计，适用于各种试样和材料的拉伸、压缩、反向应力和扭转试验。夹具为机械操作，前开式设计便于样品插入、定位和夹紧。
操作原理这些夹具的仅楔形夹体作用原理旨在不施加压缩载荷的情况下夹紧试样，否则可能导致试样屈曲。
夹体的缩回运动有助于减少通常在夹紧试样时产生的压缩载荷。
前开式设计允许快速轻松地更换夹面。夹面可优化夹持性能，锯齿夹面旨在最大限度地减少对试样表面的损伤。
应用范围
可选择气动控制装置、脚踏开关和分配套件，从而方便夹具闭合并提高使用气动夹具时的工作效率，包括使用气动平推拉伸夹具、气动绳线夹具、气动剥离工装等。
智能气动控制装置是一种系统集成选项，可用于监测和控制向 Instron 气动夹具施加的气压。
通用气动脚踏开关旨在提供按顺序的夹持动作，使操作员无需手动操作，可以解放双手来对齐夹具中的试样。
2519 系列载荷传感器专门设计用于 3400 和 3300 系列单柱测试系统。自动传感器识别和电气校准功能使得它们非常易于使用。载荷传感器具有过载保护功能，可承受的载荷高达力容量的 150%，而不会损坏，并且可以承受 300% 的载荷而不会出现机械故障。使用该款载荷传感器，用户可以将重量高达力容量 40% 的夹具或工装的自重归零，同时仍保持规定的精度。
所有的英斯特朗载荷传感器均经过单独的温度补偿，并使用可溯源至国际标准的校准设备进行了精度和可重复性测试，测量的不确定度不超过载荷传感器所允许误差的三分之一。
英斯特朗 2519 系列载荷传感器为精密力传感器，由连接到刚性和高线性弹性元件的全应变计电桥组成。当元件受力时，仪表的电阻会发生变化，从而产生与所施加的力成比例的输出信号。
载荷传感器适用于张力、压缩、循环和逆向应力测试。它们具有宽广的测量范围，力值测量可精确到力容量的 1/500，从而减少更换载荷传感器的需要。
| 项目名称 | 力容量 | 机械配件 | 类别编号 |
|---|---|---|---|
| 10 N 静态载荷传感器 | 0.01 kN 2.2 lbf |
2.5 mm U 形夹销，带 6 mm 转接头（OOf 和 Of 型） |
2519-10N |
| 50 N 静态载荷传感器 | 0.05 kN 11 lbf |
2.5 mm U 形夹销，带 6 mm 转接头（OOf 和 Of 型） |
2519-50N |
| 100 N 静态载荷传感器 | 0.1 kN 22 lbf |
2.5 mm U 形夹销，带 6 mm 转接头（OOf 和 Of 型） |
2519-100N |
| 500 N 静态载荷传感器 | 0.5 kN 112 lbf |
6.0 mm U 形夹销（Of 型） |
2519-500N |
| 1 kN 静态载荷传感器 | 1 kN 225 lbf |
6.0 mm U 形夹销（Of 型） |
2519-1KN |
| 2 kN 静态载荷传感器 | 2 kN 450 lbf |
6.0 mm U 形夹销（Of 型） |
2519-2KN |
| 5 kN 静态载荷传感器 | 5 kN 1125 lbf |
0.5 英寸 U 形夹销（Df 型） |
2519-5kN |
2530 系列荷重元，容量從 5 N 到 100 N，適用於 6800、3400、5900 和 3300 系列試驗系統。2530 系列荷重元，容量從 500 N 到 300 kN，適用於 3400 和 3300 試驗系統。其設計、製造和性能驗證皆考量材料試驗應用。自動感測器識別和電氣校準使其易於使用。這些荷重元內建過載保護，可承受高達其額定力容量 150% 的負載而不會損壞，以及 300% 的負載而不會發生機械故障。這些荷重元允許使用者歸零夾具或固定裝置的皮重，其重量可達額定力容量的 10% 或 40% (視型號而定)，同時仍能保持完整的指定準確度。
所有 Instron 荷重元均經過獨立溫度補償，並在可追溯至國際標準的校準設備上進行準確度和重複性測試，其測量不確定度不超過荷重元允許誤差的三分之一。
正在尋找 2519 系列荷重元嗎？
2519 系列荷重元已停產。然而，我們很高興提供 2530 系列荷重元作為直接替代品。2530 系列旨在大多數應用中無縫取代 2519 系列荷重元。
如需技術規格、相容性詳情或轉換至 2530 系列的協助，請聯絡我們。
應用範圍
產品
| 項目名稱 | 容量 | 機械配件 | 型錄編號 |
|---|---|---|---|
| 5 N 靜態荷重元 | .005 kN 1.12 lbf |
2.5mm 帶 6mm 轉接頭的 U 形銷 (OOf 和 Of 型) |
2530-5N |
| 10 N 靜態荷重元 | .01 kN 2.25 lbf |
2.5 mm 帶 6 mm 轉接頭的 U 形銷 (OOf 和 Of 型) |
2530-10N |
| 50 N 靜態荷重元 | .05 kN 11.2 lbf |
2.5 mm 帶 6 mm 轉接頭的 U 形銷 (OOf 和 Of 型) |
2530-50N |
| 100 N 靜態荷重元 | .1 kN 22.5 lbf |
2.5 mm 帶 6 mm 轉接頭的 U 形銷 (OOf 和 Of 型) |
2530-100N |
| 500 N 靜態荷重元 | .5 kN 112 lbf |
6.0 mm U 形銷 (Of 型) |
2530-500N |
| 1 kN 靜態荷重元 | 1 kN 225 lbf |
6.0 mm U 形銷 (Of 型) |
2530-1kN |
| 2 kN 靜態荷重元 | 2 kN 450 lbf | 6.0 mm U 形銷 (Of 型) |
2530-2kN |
| 5 kN 靜態荷重元 | 5 kN 1125 lbf |
0.5 吋 U 形銷 (Df 型) |
2530-5kN |
| 10 kN 靜態荷重元 | 10 kN 2250 lbf |
0.5 吋 U 形銷 (Df 型) |
2530-10kN |
| 30 kN 靜態荷重元 | 30 kN 6750 lbf |
0.5 吋 U 形銷 (Df 型) |
2530-30kN |
| 50 kN 靜態荷重元 | 50 kN 11250 lbf |
0.5 吋 U 形銷 (Df 型) |
2530-50kN |
| 100 kN 靜態荷重元 | 100 kN 22500 lbf |
0.5 吋 U 形銷 (Df 型) |
2530-100kN |
| 300 kN 靜態荷重元 | 300 kN 67500 lbf |
M48 x 2LH (IIF 型)，6 個 M20 螺栓分佈在 150 PCD 上，6 個 M10 螺栓分佈在 100 mm PCD 上 |
2530-300kN |
2742-315气动楔形夹具专为ElectroPuls® 10000系统而设计，适用于各种试样和材料的拉伸、压缩、扭转和反向应力试验。夹具直通过机器手柄进行气动操作，前开式设计便于样品插入、定位和夹紧。
操作原理这些夹具的仅楔形夹体作用的原理旨在不施加压缩载荷的情况下夹紧试样，否则可能导致试样屈曲。夹体的缩回运动有助于减少通常在夹紧试样时产生的压缩载荷。
前开式设计允许快速轻松地更换试样和夹面。夹面可优化夹持性能，锯齿夹面旨在最大限度地减少对试样表面的损伤。
应用范围
2580 系列载荷传感器专门设计用于 6800 和 5900 系列测试系统；性能卓越，能够测量低至力容量 1/1000 的力，精度为读数的 0.5%。载荷传感器可承受的载荷高达力容量的 150%，而不会损坏，并且可以承受 300% 的载荷而不会出现机械故障。自动传感器识别和电气校准功能使得它们非常易于使用。使用该款载荷传感器，用户可以将重量高达力容量 10% 的夹具或工装的自重归零，同时仍保持规定的精度。所有的英斯特朗载荷传感器均经过单独的温度补偿，并使用可溯源至国际标准的校准设备进行了精度和可重复性测试，测量的不确定度不超过载荷传感器所允许误差的三分之一。
英斯特朗 2580 系列载荷传感器为精密力传感器，包含一个连接到超高刚度弹性元件的全应变计电桥。当元件受力时，仪表的电阻会发生变化，从而产生与所施加的力成比例的输出信号。
该元件的双剪切设计确保了整个测试过程中出色的对准能力和极高的抗偏离载荷能力，即使是大型试样也是如此。
应用范围
产品
| 项目名称 | 力容量 | 机械配件 | 类别编号 |
|---|---|---|---|
| 500 N 静态载荷传感器 | 0.5 kN |
6.0 mm U 形夹销（Of 型） |
2580-500N |
| 1 kN 静态载荷传感器 | 1 kN |
6.0 mm U 形夹销（Of 型） |
2580-1KN |
| 2 kN 静态载荷传感器 | 2 kN |
6.0 mm U 形夹销（Of 型） |
2580-2KN |
| 5 kN 静态载荷传感器 | 5 kN |
0.5 英寸 U 形夹销（Df 型） |
2580-5KN |
| 10 kN 静态载荷传感器 | 10 kN |
0.5 英寸 U 形夹销（Df 型） |
2580-10KN |
| 30 kN 静态载荷传感器 | 30 kN |
0.5 英寸 U 形夹销（Df 型） |
2580-30KN |
| 50 kN 静态载荷传感器 | 50 kN |
0.5 英寸 U 形夹销（Df 型） |
2580-50KN |
| 100 kN 静态载荷传感器 | 100 kN |
0.5 英寸 U 形夹销（Df 型） |
2580-100KN |
| 150 kN 静态载荷传感器 | 150 kN |
M48 x 2LH（IIF 型）；6 off M20，在 150 mm PCD 上；6 off M10，在 100 mm PCD 上 |
2580-150KN |
| 250 kN 静态载荷传感器 | 250 kN |
M48 x 2LH（IIF 型）；6 off M20，在 150 mm PCD 上；6 off M10，在 100 mm PCD 上 |
2580-250KN |
| 300 kN 静态载荷传感器 | 300 kN |
M48 x 2LH（IIF 型）；6 off M20，在 150 mm PCD 上；6 off M10，在 100 mm PCD 上 |
2580-300KN |
| 400 kN 静态载荷传感器 | 400 kN |
M48 x 2LH（IIF 型）；6 off M20，在 150 mm PCD 上；6 off M10，在 100 mm PCD 上 |
2580-400KN |
| 600 kN 静态载荷传感器 | 600 kN |
M72 x 3LH（IIF 型）；6 off M10，在 100 mm PCD 上 |
2580-600KN |
T-slotted tables provide an extremely versatile method of securing fixtures to test odd sized specimens in the compression space of DX model static hydraulic universal testing machines. Commercially available T-slot nuts are slid into the inverted T slot of the table. Bolts, studs, or threaded rods can then be threaded into the nuts. The T-slot table can be used to secure specimens that might otherwise be ejected from the test space under load. It can also be used to position specimens in the same location for repeated tests or batch testing of product. Guides, slides, or stops can be positioned on the table and bolted into position to allow precise placement of the specimens for every test. With the fixturing removed from the test space, the T-slotted table is capable of supporting a compressive load to full frame capacity, the same as the loading table.
The table is bolted to the machine frame and is typically manufactured to cover the full width and depth of the loading table. Depending on the frame model, the table will reduce the useable compression space 50 to 75 mm (2 to 3 in). The frame loading table must be drilled and tapped to accept the T-slot table.
| Available Models | |||
| Item Description | Accessory Height | Catalog No. | |
| T-Slot Table for 150DX | 38 mm | 150DX-0005 | |
| T-Slot Table for 300DX | 38 mm | 300DX-0005 | |
| T-Slot Table for 600DX | 44 mm | 600DX-0005 | |
在伺服液壓機進行測試時，系統的各個元件都會受到加速度的影響。因此，除了施加在試樣上的力之外，荷重元還會讀取由其自身運動以及連接在其上的夾具和固定裝置的質量所產生的力。
Dynacell 是全球首款真正的動態荷重元，從一開始就設計用於測量動態負載。Dynacell 具備以下優點：
Dynacell 採用加速規，直接位於荷重元的核心，即負載軸上。這消除了因偏心負載導致加速讀數錯誤的風險。
這具有以下優勢：
Dynacell 的加速訊號調節在 FastTrack 8800 電子設備中作為標準處理，並且在系統自動調諧時自動設定。這意味著節省了時間並減少了操作員錯誤。
對於希望自行執行此操作的用戶，他們可以選擇開啟或關閉此功能，並手動設置校正係數。然後將所得信號從荷重元信號中減去，以得到試樣上的真實力。
應用範圍
產品
| 產品名稱 | 目錄編號 |
|---|---|
| ±25 kN (±5620 lbf)，±100 Nm (±880 in-lb) 雙軸向 Dynacell | 2527-201 |
| Dynacell - 雙軸動態荷重元 ±10 kN (±2250 lbf), ±100 Nm (±880 in-lb) | 2527-202 |
| Dynacell - 雙軸動態荷重元 ±1 kN (±225 lbf), ±25 Nm (±220 in-lb) | 2527-302 |
| Dynacell - 雙軸動態荷重元 ±5 kN (±1124 lbf), ±25 Nm (±220 in-lb) | 2527-303 |
適用於 55MT 系列扭力測試機的扭力感測器根據機型提供多種容量選擇。較低容量的感測器可擴展機器的測試範圍，提升 55MT 系列測試機的功能性。
對於 55MT1，扭力感測器為微型反作用扭矩傳感器。這些感測器體積非常小，具有優異的線性度和重複性。所有感測器使用相同的安裝模式，因此夾具的互換性不會有問題（對於 2 英吋磅的感測器，夾具重量可能是一個考慮因素）。
這些感測器配備了整合式安裝板和過載保護板，用於將主感測器安裝在 55MT1 機台上。這不僅為感測器提供保護，還能實現從主感測器到低量程感測器的極快速更換。
對於較大的 55MT2 和 55MT20 機台，感測器為法蘭式反作用扭矩傳感器。這提供了更高的抗彎矩能力。感測器具有高扭轉剛度和低端靈敏度。
特定機台的所有感測器都使用標準圓形安裝模式，因此感測器可使用與主感測器相同的硬體安裝到機台上。由於所有現有夾具都以相同方式安裝在低容量感測器上，因此無需額外的轉接器。
所有扭力感測器都將旋轉運動轉換為代表施加扭矩的電信號。當需要測試較小的試樣時，可以添加低容量感測器來擴展機器的操作範圍。
如果施加於試樣的最大扭矩遠低於機台的容量，添加低量程感測器將提高扭矩測量傳感器的解析度。
在 55MT1 和 55MT2 機台上安裝扭力感測器只需使用內六角扳手，因此更換非常簡便。這減少了停機時間並提高了生產力。對於較大的 55MT20更換感測器時，需要使用帶內六角套筒的扭力扳手。
應用範圍
產品
| 產品名稱 | 扭矩容量 | 配件直徑 | 產品編號 |
|---|---|---|---|
| 扭力感測器 | 0.225 Nm 2 in-lb |
54.0 mm 2.125 in |
W-5510-T4 |
| 扭力感測器 | 2.25 Nm 20 in-lb |
54.0 mm 2.125 in |
W-5510-T3 |
| 扭力感測器 | 22 Nm 200 in-lb |
54.0 mm 2.125 in |
W-5510-T2 |
| 扭力感測器 | 220 Nm 2,000 in-lb |
101.6 mm 4.00 in |
W-5510-T1 |
應變測量是機械測試的關鍵組成部分，幾乎所有相關的 ASTM 和 ISO 標準都要求應變測量。 Instron 提供各種應變測量設備，適用於各種材料和應用。從簡單的黏貼式應變計到最先進的影像延伸計，我們的所有設備均由 Instron 工程師設計和製造，以滿足我們嚴格的精度標準。如果您的測試應用需要創新的解決方案，我們的客製化工程團隊可以為您設計和實施滿足您需求的應變測量解決方案。
Torsion grips are designed to transmit torsional forces to the specimen and usually employ either a collet or socket-style gripping arrangement. Whereas, axial torsional grips are used in conjunction with systems able to apply both torsional and axial loads to a specimen simultaneously.
Axial-Torsion Wedge Grips
These grips utilize a wedge-action gripping technique making them suitable for flat specimens as well as cylindrical.
Chuck Style
These universal drill-type chuck grips can be used to hold round, hex or triangular specimens. The standard sets are available in both a keyless and keyed style that can hold a range of specimen sizes.
Collet Style
Two standard sets of Collet Style grips are available: a small collet grip set for smaller specimens and a large collet grip set for larger specimens. Both sets are double angle style.
Socket Style
These socket style adapters allow the connection of any 0.5 inch drive socket or accessory directly to the torque cell and/or output shaft on the MT series frames.
The Custom Solutions group at Instron® has been developing uncommon fixtures, grips and platens to meet our clients' special requirements for over 30 years. Please select a link below to see some of our recent projects.
Furnaces and related accessories for universal testing systems and fatigue testing systems – capable of testing up to 1200°C in air, with engineered solutions available to cater for height and width variants and higher temperature requirements.
Furnace Testing for Universal Testing Systems
Our standard furnaces, mounts, grips, and load string assemblies for universal testing systems allow for testing up to 1200°C in air.
Furnace Testing for Fatigue Testing Systems
Our standard furnaces and load string assemblies for fatigue testing systems allow for testing up to 1000°C in air.
Frame accessories designed for use with Instron Industrial Series static hydraulic universal testing machines.
In-Head Wedge Grip Jaws
In-head wedge grip jaws fit directly into the crosshead pocket of the load frame and provide a grip that is adaptable for testing flat, round, and cable specimens in compliance with ASTM E8.
T-Slotted Tables
T-slotted tables offer a versatile means of securing fixtures to test odd specimen geometries in the compression space of DX model static hydraulic universal testing systems.
適用於低速後方、側面和立柱衝擊模擬的配件，有助於提高開發過程的生產力和效率。
Instron® 是唯一一家設計並製造自有荷重元的測試系統製造商。這確保了 Instron 荷重元能滿足材料測試系統的獨特要求，例如在寬廣量測範圍內的高準確度、高剛度、抗偏載能力、精確對準和優異的零點穩定性。這些荷重元在英國海威科姆的 Instron 製造中心生產。所有 Instron 荷重元都經過單獨溫度補償，並在可追溯至國際標準的校準設備上測試其準確度和重複性，其量測不確定度不超過荷重元允許誤差的三分之一。Instron 位於麻薩諸塞州的總部擁有美國最大的商用砝碼堆疊，這使得 Instron 荷重元通常能超越大多數材料測試標準所要求的準確度水準。
Instron® 提供多種的拉伸夾具，適合您的產業與測試應用。這些夾具的夾力從 1 公克到 2 兆牛頓不等，可配合各種材料，如線、繩、彈性體、塑膠、複合材料、金屬等。如有特殊應用需求，本公司的自訂工程團隊也非常樂意為您設計適合的夾具。Instron 夾具符合所有全球測試標準，設計耐用數十年，並有本公司世界級的服務與支援團隊作為後盾。
微電子拉伸夾具
各種不同拉伸夾具，適合於對包括引線、芯線和形狀不規則產品在內的各種微電子元件及組件進行拉伸測試。
更多資訊
Cord Capstan
Tensile Grips
Manual tensile grips designed specifically for rope and cord up to 3.2mm in diameter and 2.5kN of breaking strength.
無論您的應用涉及注射器、魯爾鎖接頭、自動注射器、注射筆、縫線、假體、植入物、醫療包裝或個人防護裝備 (PPE)，Instron 都能提供一系列符合業界標準的測試夾具和配件。如需了解更多關於藥物輸送裝置和容器、醫療耗材和包裝、心血管和介入器材、生物材料、骨科植入物以及牙科器械的最新測試應用，請造訪我們的生物醫學行業頁面。
Instron 的 ISO 80369 系統建立在我們先進的 6800 系列雙軸萬能試驗機之上，具有卓越的性能和靈活性，可支援各種醫療器械測試。
通過將機械和加壓洩漏性能測試整合到一台機器中，它提高了效率，縮短了評估時間，並最大限度地減少了設備使用。該系統採用注射器、靜脈注射中心和連接器的模組化配置，可確保精確對準和適應各種設備幾何形狀。使用 Instron ISO 80369 系統最大限度地提高您的測試能力，該系統專為標準和定製設備測試而設計。
我們的注射器夾具系列旨在研究評估注射器及針頭組合性能所需的各種力量。與測試系統配合使用的夾具可以確定操作裝置所需的力，特別是脫離力和滑動力。
CP131100 通用注射器夾具設計用於適合 1 ml 至 50 ml 的多種常用注射器規格。其可調節的夾持機構使操作人員能夠輕鬆調整以適應不同規格的注射器，非常適合測試實驗室使用。 2870-001 注射器夾具設計簡潔，採用專用插件在測試過程中支撐注射器法蘭。
我們還提供單獨的注射器測試夾具，產品目錄號為 2870-003，專門設計用於滿足 ISO 7886-1 附錄 G 對無菌一次性皮下注射器的測試要求。
Instron 的自動轉盤測試系統採用創新的適應性設計，用於測試醫用小瓶、卡式瓶和預裝注射器。佔地面積小，可以放在標準實驗室工作臺上，即使是最小的實驗室也能實現自動化。它採用易於擦拭的表面和不鏽鋼蓋板設計，適用於生物醫學環境。通常配置為自動測試殘餘密封力 （RSF） 和壓縮測試。
| 供应型号 | |
| 载荷容量选型 | 目录编号 |
| 50 N | 2712-051 |
| 250 N | 2712-052 |
|
|||||
|
最大钳面开口 |
|
|||
| 100 N | 35 mm | 2710-111 | |||
| 500 N | 35 mm | 2710-112 | |||
| 1 kN | 36 mm | 2710-113 | |||
| 2 kN | 36 mm | 2710-114 | |||
| 5 kN | 46 mm | 2710-115 | |||
| 10 kN | 46 mm | 2710-116 | |||
| 规格 | ||
| 载荷容量选型 | 最大试样厚度 | 目录编号 |
| 10 N | 0.8 mm | 2712-101 |
| 规格 | ||
| 载荷容量选型 | 目录编号 | |
| 10 N | 2860-001 | |
複合材料的特性分析需要在不同負載條件下進行一系列測試，如拉伸、壓縮、剪切、彎曲和剝離。Instron 提供一系列符合 ASTM、ISO、EN 和其他測試標準要求的高性能複合材料測試夾具。
提供可在廣泛溫度範圍內操作的手動和液壓夾具類型。建議使用移動式手動和液壓楔形夾具來測試複合材料，因為它們能可靠地夾持測試樣品，同時保持準確和可重複的對準，符合航空航天測試的 Nadcap 要求。可使用轉接器將各種複合材料測試夾具連接到這些夾具上，這意味著在更換測試設置時無需移除夾具，從而減少中斷並提高生產力。
| 概述 | |
| 常見標準 | ASTM D695、ASTM D3846、Boeing BSS 7260、SACMA SRM-1、prEN 2850、ISO 14126 |
| 目錄編號 | S4931A、CP108932、CP114221、CP114215、CP115010、CP115011、CP114249 |
| 概述 | |
| 常見標準 | ASTM D6484、ASTM D6484M、Boeing BSS 7260 |
| 目錄編號 | CP113777、CP113778、CP113779、CP113780 |
複合材料 V 型槽剪切測試夾具
Instron 剪切測試夾具專為複合材料的面內或層間剪切測試而設計。V 型槽梁法（又稱為 Iosipescu 剪切法）於 1993 年標準化為 ASTM D5379，而 V 型槽導軌剪切法則於 2005 年以 ASTM D7078 標準引入。這兩種測試方法有許多共同特點，並在樣品設計中具有獨特的 V 型槽，用於在槽口之間創建局部且近似均勻的剪切應力區。需要注意的是，ASTM D7078 和 D5379 中的兩種夾具在樣品設計、負載施加方式以及獲得的結果類型方面都有很大的不同。
| 概述 | |
| 常見標準 | ASTM D5379、ASTM D7078 |
| 目錄編號 | S4685A、CP105207 |
符合 ASTM D4255 的複合材料導軌剪切
ASTM D4255 描述了雙導軌和三導軌兩種方法來確定複合材料層壓板的面內剪切強度。在雙導軌測試（方法 A）中，將層壓板樣品夾在載荷板和軛架之間，然後施加剪切載荷。測量剪切應變需要在樣品上使用應變計。提供兩種類型的夾具：一種在壓縮模式下工作，另一種在拉伸模式下工作。包含樣品模板以確保樣品中孔的準確位置。
| 概述 | |
| 常見標準 | ASTM D4255 |
| 目錄編號 | S4695A、S4695B |
| 概述 | |
| 常見標準 | ASTM D7137 / 7137M、Boeing BSS 7260 |
| 目錄編號 | S5385A、CP103712 |
| 概述 | |
| 常見標準 | AITM 1-0010 |
| 目錄編號 | CP105079 |
| 概述 | |
| 常見標準 | ASTM C273 |
| 目錄編號 | S4681A、S4682A |
攀爬滾筒剝離夾具
黏合劑的攀爬滾筒剝離測試用於測量蜂窩板芯層和面層之間的黏合強度。
| 概述 | |
| 常見標準 | ASTM D1781、EN 2243-3 |
| 目錄編號 | S4680A、S4680C、CP108963 |
120 和 350 歐姆應變計的應變計轉接器
從航空航天到建築，應變計在各種行業中用於測量材料和結構測試中的應變。這些應變計轉接器允許單個應變計與任何標準 Instron 應變通道一起使用。應變計轉接器包含橋路補償電阻和電氣校準電路。應變計引線通過彈簧加載端子連接到轉接器。支援 2 線和 3 線應變計連接。該轉接器與規格因數在 1.5 - 2.5 之間的應變計相容。多個應變計需要多個轉接器，可以使用到測試機安裝的最大應變通道數。
| 概述 | |
| 目錄編號 | 2210-891、2210-892 |
雙軸延伸計
一系列雙軸和平均軸向延伸計經過優化，用於測量複合材料測試時的應變。這些伸長計具有簡單的單手操作功能，並包含自動電氣校準和傳感器識別，包括唯一的數字序列號。所有伸長計都測量樣品兩側的軸向應變。使用平均軸向應變可校正由於未對準造成的任何樣品彎曲，以便一致和準確地確定模量。雙軸版本測量橫向應變，允許確定泊松比和面內剪切應變。
| 概述 | |
| 標準 | 符合 ASTM E82 B-1、ISO 9513 0.5 級和 ISO 527（附件 C） |
| 目錄編號 | 2650-561 |
這些夾具專為萬能試驗機設計，用於執行各種剝離、穿刺、爆破和摩擦係數測試。
| 概述 | |
| 目錄編號 | 2820-036 |
| 相關標準 | ASTM B571、ASTM D2861、ASTM D3330（方法f）、ASTM D6252、ASTM D6862 |
| 剝離角度 | 30°, 45°, 60°, 90°, 130°, 150° |
| 最大負載 | 1 kN |
| 最大基材寬度 | 130 mm |
| 最大基材長度 | 250 mm |
90°剝離夾具的設計目的是幫助操作員快速且一致地對齊並夾緊試樣，同時確保從開始到結束都能保持90°角度。透過改進的夾持和試樣對齊輔助裝置，該夾具相較於標準手動控制和設置的剝離夾具，提供了更高的重複性、更高的處理量，並減少了操作員的參與。這些特點使得氣動版本比標準的手動調節和夾持的90°剝離夾具更受歡迎。
| 概述 | |
| 目錄編號 | 2810-005 |
| 相關標準 | ASTM D1894、ISO 8295:2004 |
| 概述 | ||
| 目錄編號 | 2820-101 | 2820-102 |
| 相關標準 | ASTM D3167 | ISO 4578、EN 1464、EN 2243-2 |
| 最大負荷 | 5 kN | 5 kN |
| 概述 | |
| 目錄編號 | 2820-026 |
| 相關標準 | ISO 6133、IPC-TM-650 2.4.9 |
| 剝離角度 | 90° |
| 最大負載 | 1 kN |
| 概述 | |
| 目錄編號 | 2810-195 |
| 相關標準 | ASTM D3787、ASTM D6797、FED 191A |
| 最大負荷 | 10 kN |
| 概述 | |
| 貨號 | 2810-501 |
| 相關標準 | ASTM D5748-95、ASTM D4649 |
| 最大負荷 | 4.4 kN |
| 概述 | |
| 貨號 | S1-11855 |
| 相關標準 | MIL-STD-3010 |
| 最大負荷 | 2.5 kN |
