0.375 in Keyed Drill-Type Chuck Assembly

測試配件< » 拉伸夾具 » Torsion and Axial-Torsion Grips » Chuck Style » 0.375 in Keyed Drill-Type Chuck Assembly » Page 11

0.375 in Keyed Drill-Type Chuck Assembly

No image available - Instron

W-MT01-B | Universal Keyed Drill-Type Chucks for MT Systems

Two chucks are provided

  • Specimen range from 0.5 mm to 9.5 mm
    (0.02 to 0.374 in.)
  • Drill Chuck adapting thread: M12-1.75m
  • Effective length each chuck: 75 mm (2.95 in)
  • Specimen insertion depth:
  • 35 mm (1.375 in) up to 6 mm (0.24 in) diameter
  • 31 mm (1.250 in) up to max diameter
  • Capacity: 22.5 Nm (200 lbf-in)

NOTE: Capacity is dependant on specimen geometry. When testing smooth, round specimens, the fixture may not be able to reach full capacity without slippage.

View Accessories Catalog
規格表
規格表
Accessory Length 96.5 mm (3.80 in)
Lower Fitting M12x1.75mRH ( )
Specimen Diameter 9.5 mm (0.375 in)
Torque Capacity 22.5 Nm (200 in-lb)
Upper Effective Length 76.2 mm (3.00 in)
Upper Fitting M12x1.75mRH ( )

Flexure Fixture, Fatigue 3 Point

測試配件< » 彎曲夾具 » 3 and 4 Point Fatigue Flexure Fixtures » Flexure Fixture, Fatigue 3 Point » Page 11

Flexure Fixture, Fatigue 3 Point

2810-182_P
2810-182_P

2810-200 | Fatigue Rated 3 Point Bend Fixture

250 kN (56 kip) Dynamic Capacity, With 100mm (4.0 in) Diameter Upper Roller and 50mm (1.97 in) Diameter Lower Rollers

  • Adjustable lower span from 100 to 600mm
    (3.94 to 23.6 in)
  • Maximum specimen width is 100mm (3.94 in)
  • Mechanical interface: M48 x 2 right hand female
    threads
  • Anti-rotation is incorporated in the design

Requires: fatigue rated adapters

View Accessories Catalog
文獻 附加元件 規格表
文獻

2810 Series Flexure Fixture

Catalog number 2810-200
Rated capacity 250 kN (25000 kgf, 56250 lbf)
3-point flexure fixture with an optional conversion kit for 4-point loading

  • 产品
  • 10/19/2005
  • 287.25 KB

附加元件
規格表

150 kN Lever Action Mechanical Wedge Grips


測試配件<
»
拉伸夾具
»
Mechanical Wedge Lever Action Grips
»
150 kN Lever Action Mechanical Wedge Grips
»
Page 11


150 kN Lever Action Mechanical Wedge Grips

This is Image Tag

150 kN (15,000 kg, 33,750 lbs) capacity T-Grip Bodies

  • Set of 2
  • Open front bodies
  • Spring/lever actuated wedge grip jaws
  • Specimen sizes; flats 0.016"-1.0" thick x up to 2" wide and rounds 0.375" up to 1.0" diameter
  • Bodies are tapped 1-1/2" - 6 UNC for easy attachment
  • Nominal weight per grip body is 35 lbs
  • Approx. size: 6-1/2"H x 11"W x 4-1/2"D
  • Jaws are listed as separate items

View Accessories Catalog

Low Speed Rear Impact Simulation

測試配件< » 碰撞類比配件 » Low Speed Rear Impact Simulation » Page 11

Low Speed Rear Impact Simulation

csa
csa whiplash

Low Speed Rear Impact Simulation

The most common complication after a rear impact and a feared cause of chronic disorders is the whiplash injury. Preventive measures such as the optimization of the seat structure and head rest are proven measures to protect the occupant.

For the development and testing of the interaction between the occupant, the seat and the head rest, appropriate test methods have been developed. The current pulse requirements for rear-end impact tests at low speed are defined in the consumer protection programs (EuroNCAP) or in the USA by third party and legal regulations (IIHS Highway Insurance Institute and FMVSS202a) and other agencies worldwide.

In order to meet the high accuracy requirements of these tests, Instron has developed an expansion package that allows the highly dynamic CSA to be operated extremely precisely at a lower acceleration range. Special low - pressure supplementary equipment reduces the operating pressure of the sled system and thereby optimizes its dynamics according to the requirements of the Whiplash test specifications.

Back to CSA.

供使用 規格表
供使用

規格表

3-Jaw Chuck

測試配件< » 食品測試夾具 » 3-Jaw Chuck » Page 11

3-Jaw Chuck

Catalog no. 2830-036

Three Jaw Chuck
Three Jaw Chuck Three Jaw Chuck With Probe

2830-036 | 3-Jaw Chuck

Maximum specimen diameter: 13 mm (0.5 in). Capacity: 500 N (100 lb, 50 kg).

Temperature range: 0 °C to 100 °C (32 °F to 212 °F).

Fitting: 6 mm clevis, male.

Minimum specimen diameter: 1.5 mm (.06 in).

Weight: 340 g (.75 lb). Includes one chuck.

View Accessories Catalog
文獻 附加元件 規格表
文獻

Food Texture Fixtures Probes and Chucks

Flat-end puncture probes produce a shear stress in the specimen. The force required to cause shearing as the probe penetrates the specimen relates to texture properties such as firmness and hardness.

  • 产品
  • 11/06/2018
  • 686.36 KB

2830-036 Miniature Grips for Low-Force Testing – Reference Manual

This guide provides instructions on how to use your components and other frequently performed operating tasks. This manual covers four types of grips: a set of mechanical action wedge grips, manually operated screw grips, a set of chuck grips similar to the chuck on an electric drill, and a set of pincer-action fiber grips. The four types of grips described are covered throughout this manual. The manual is divided into chapters covering description, specifications, installation, operation, maintenance, and parts breakdown. The chapters are subdivided into information about each type of grip.

  • Manual
  • 08/04/2020
  • 780.73 KB

附加元件
規格表

Safety Guard for ElectroPuls E3000 Test Instrument

測試配件< » 機架配件 » Electropuls All-Electric Dynamic Test Systems » Safety Guard for ElectroPuls E3000 Test Instrument » Page 11

Safety Guard for ElectroPuls E3000 Test Instrument

Safety Guard for ElectroPuls E3000 Test Instrument
Safety Guard for ElectroPuls E3000 Test Instrument

1300-304 | Safety Guard for ElectroPuls E3000 Test Instrument

Provides an integrated polycarbonate based guard with a hinged door to prevent operator access to test space when the E3000 is at high power. The guard is also designed to minimize hazards associated with specimen failure.

Includes interlock with ElectroPuls controller to prevent the instrument being switched into high power mode whilst the door is open. Also includes key-switch to over-ride the interlock in extreme cases allowing the machine to operated at high power with the guard door open.

NOTE: Only compatible with 8800 Tower controller

View Accessories Catalog
規格表
規格表
Accessory Depth - Door Closed 542 mm (21.3 in)
Accessory Depth - Door Open 1086 mm (42.8 in)
Accessory Height - Door Closed 1283 mm (50.5 in)
Accessory Height - Door Open 1283 mm (50.5 in)
Accessory Width - Door Closed 948 mm (37.3 in)
Accessory Width - Door Open 1234 mm (48.6 in)

Small Collet Grip Assembly, Range 0.8 – 6.3 mm (0.03125 – 0.25 in)

測試配件< » 拉伸夾具 » Torsion and Axial-Torsion Grips » Collet Style » Small Collet Grip Assembly, Range 0.8 – 6.3 mm (0.03125 – 0.25 in) » Page 11

Small Collet Grip Assembly, Range 0.8 - 6.3 mm (0.03125 - 0.25 in)

W-MT02 | Small Collet Grip Set for MT Systems

Set includes:

  • Two collet chucks with M12 x 1.75m adapting threads
  • Two complete sets of collets ranging from
    1.19 mm to 6.3 mm (0.046 in to 0.25 in) with 0.4 mm
    (0.0156 in) increments.
  • Effective length each collet chuck: 83 mm (3.27 in)
  • Capacity: 57 Nm (500 lbf-in)
View Accessories Catalog
規格表
規格表
Accessory Length 111.1 mm (4.375 in)
Lower Fitting M12x1.75mRH ( )
Specimen Diameter 0.80 - 6.30 mm (0.0313 - 0.2500 in)
Torque Capacity 225 Nm (2000 in-lb)
Upper Effective Length 85.7 mm (3.375 in)
Upper Fitting M12x1.75mRH ( )

Ethernet Frame Interface

測試配件< » 機架配件 » 機電式框架配件 » Ethernet Frame Interface » Page 11

Ethernet Frame Interface

2424-500 | Ethernet Frame Interface (EFI)

Overview:

  • Includes: ethernet frame interface, ethernet card, and cables
  • For all 3300 and 5500 Series systems
  • Connects to PC ethernet port

EFI software compatibility:

  • Bluehill® Universal
  • Bluehill 3 (all versions)
  • Bluehill 2 version 2.15 or above
  • Bluehill Lite version 2.15 or above
  • Partner version 8.2a or above

View Accessories Catalog

Safety Guard for ElectroPuls E20000 Test Instrument

測試配件< » 機架配件 » Electropuls All-Electric Dynamic Test Systems » Safety Guard for ElectroPuls E20000 Test Instrument » Page 11

Safety Guard for ElectroPuls E20000 Test Instrument

1300-305 | Safety Guard for ElectroPuls E20000 Test Instrument

Provides an integrated polycarbonate based guard with a hinged door to prevent operator access to test space when the E20000 is at high power. The guard is also designed to minimize hazards associated with specimen failure.

Includes interlock with ElectroPuls controller to prevent the instrument being switched into high power mode whilst the door is open. Also includes key-switch to over-ride the interlock in extreme cases allowing the machine to operated at high power with the guard door open.

NOTE: Only compatible with 8800MT controller

View Accessories Catalog
規格表
規格表
Accessory Depth - Door Closed 601 mm (23.7 in)
Accessory Depth - Door Open 1427 mm (56.18 in)
Accessory Height - Door Closed 1295 mm (50.98 in)
Accessory Height - Door Open 1295 mm (50.98 in)
Accessory Width - Door Closed 1072 mm (42.20 in)
Accessory Width - Door Open 1872 mm (73.70 in)

Safety Guard for ElectroPuls E10000 Test Instrument

測試配件< » 機架配件 » Electropuls All-Electric Dynamic Test Systems » Safety Guard for ElectroPuls E10000 Test Instrument » Page 11

Safety Guard for ElectroPuls E10000 Test Instrument

1300-303 | Safety Guard for ElectroPuls E10000 Test Instrument

Provides an integrated polycarbonate based guard with a hinged door to prevent operator access to test space when the E10000 is at high power. The guard is also designed to minimize hazards associated with specimen failure.

Includes interlock with ElectroPuls controller to prevent the instrument being switched into high power mode whilst the door is open. Also includes key-switch to over-ride the interlock in extreme cases allowing the machine to operated at high power with the guard door open.

NOTE: Only compatible with 8800MT controller

View Accessories Catalog
規格表
規格表
Accessory Depth - Door Closed 496 mm (19.5 in)
Accessory Depth - Door Open 1286 mm (50.65 in)
Accessory Height - Door Closed 1304 mm (51.34 in)
Accessory Height - Door Open 1304 mm (51.34 in)
Accessory Width - Door Closed 1054 mm (41.5 in)
Accessory Width - Door Open 1296 mm (51.02 in)

智能關閉氣動套件

測試配件< » 機架配件 » Air Kits for Pneumatic Grips » 智能關閉氣動套件 » Page 11

智能關閉氣動套件

Catalog no. 2701-095

智能關閉氣動套件（料號2701-095）與所有3400和6800系列機型相容，是系統集成選件，可監測及控制Instron氣動夾具的氣壓。

更簡單

  • 測試壓力儲存在測試方法內，透過確保每次測試均能維持一致的夾持壓力來提高再現性。
  • 使用符合人體工學 IP-65 等級的雙踏板足踏開關進行夾具開閉。

更聰明

  • 對於非硬性試片，如薄膜和彈性體，在測試結束時會自動打開夾具，進而減少執行測試所需的步驟。
  • 當透過拉伸待測紗線試片達到設定的預荷重拉力時，機台將會自動關閉第二個夾具。

更安全

  • 進行測試時，可限制氣動壓力，並減緩夾具關閉的速度，將夾傷的危險降到最低。待將試片安全地放入夾具後，機台將啟動虛擬安全鎖並執行最大夾持壓力。
  • 氣動式套件已全面整合至系統的緊急停機裝置內，以確保在按下緊急停止鈕時，夾具會即刻打開。
索取配件型錄
規格
規格
相容主機型號 3400 系列, 6800 系列
連接樣式 ¼ 吋 OD 管線
最大輸入壓力 8.3 bar (120psi)
最大輸出壓力 6.9bar (100psi)

 

High Temperature Pneumatic Cord and Yarn Grips

測試配件< » 拉伸夾具 » 氣動繩索和紗線拉伸夾具 » High Temperature Pneumatic Cord and Yarn Grips » Page 11

High Temperature Pneumatic Cord and Yarn Grips

2734-007 | Pneumatic Cord and Yarn Grips

Capacity: 1.0 kN (225 lb, 100 kg).

Temperature range: -70 °C to 260 °C (-100 °F to 500 °F).

Maximum specimen diameter: 3.175 mm (0.125 in).

Upper and lower fittings: pneumatic connection.

Requires pneumatic pullrods and an Automatic Air Control Kit or Pneumatic Foot Switch

View Accessories Catalog
附加元件 規格表
附加元件

  • Universal Pneumatic Footswitch (No Pretension)
  • Automatic Air Control Kit
  • Lower Pullrod, Type D
  • Lower Push/Pullrod, Type D
  • Upper Pullrod, Type C
  • Push/Pullrod, Type Dm
規格表