Sample Support Plate Set

測試配件< » 食品測試夾具 » Sample Support Plate Set » Page 14

Sample Support Plate Set

Catalog no. S5401A

No image available - Instron

S5401A | Sample Support Plate Set

Capacity: 2 kN

Dimensions: 100 mm x 100 mm (3.9 x 3.9 in) plates.

Four geometries:

  1. Plate with no hole
  2. Plate with a 15.9 mm (0.625 in) diameter thru hole with a
    12.7 mm (0.5 in) radius bowl shape countersunk.
  3. Plate with 22.0 mm (0.866) diameter tapering to a
    15.9 mm (0.625 in) hole
  4. Plate with 70 mm (2.8 in) diameter tapering to a
    15.9 mm (0.625 in) hole.

Upper fitting: Requires optional probe sets.

Lower fitting: Requires Support Frame S4427A, and Drip Tray S5400A

View Accessories Catalog
供使用 附加元件 相關項目 規格表
供使用

附加元件
相關項目
規格表

Compact Tension Fixtures for 25 mm Thick Compact Tension Specimens

測試配件< » 拉伸夾具 » Compact Tension Fixtures for Fracture Mechanics » Compact Tension Fixtures for 25 mm Thick Compact Tension Specimens » Page 14

Compact Tension Fixtures for 25 mm Thick Compact Tension Specimens

2780-119 | Compact Tension Fixtures for 25mm Thick Compact Tension Specimens

Designed in accordance with international standards such as ASTM E399, E647 & E1820

Rated Capacity: ±50kN Dynamic, 100kN Static

Temperature Range: -50 to 315°C

Includes:

  • Piston rod extender to reduce the minimum daylight between Loadcell and ±75mm actuator at mid-stroke to allow compact tension fixtures to touch (Quantity 1).
  • Fatigue Rated Adaptors. M30 x2 right hand male to male stud with preloading wedge washers (Quantity 2)

Note: Requires 2780-120 for use with a standard 3119-600 Series Chamber

View Accessories Catalog
文獻 規格表
文獻

Compact Tension Fixtures 2780 Series

Fatigue Compact Tension Fixtures for Servohydraulic machines to test crack growth. POD including 2780-118, 2780-119, 2780-120

  • 产品
  • 08/02/2017
  • 330.83 KB

規格表

Fatigue Rated Hydraulic Wedge Grips (+/- 500 kN)

測試配件< » 拉伸夾具 » 高級液壓楔形夾具 » Fatigue Rated Hydraulic Wedge Grips (+/- 500 kN) » Page 14

Fatigue Rated Hydraulic Wedge Grips (+/- 500 kN)

2742-601 | ±500kN (112kip) Fatigue Rated Hydraulic Wedge Grips

  • Suitable for gripping flat or round specimens
  • Features side-entry design with full access for easy specimen insertion from the side without actuator movement
  • Adjustable specimen stops on flat faces provide accurate specimen centering
  • Suitable for tension and compression including full reverse-stress dynamic testing capability
  • Static load capacity ±600kN
  • Temperature Range: +4 to +65 °C
  • Mechanical Interface: M72 x 3 right hand female threads
  • Grip mass: 255 kg (562 lbs) approximately per grip

Requires Jaw Faces, 207 bar (3000psi) grip controller and fatigue rated adapters. Quantity: 2 grips

View Accessories Catalog
供使用 附加元件 相關項目 規格表
供使用

  • 207 Bar (3000psi) Hydraulic Grip Controller and Manifold
附加元件
相關項目
規格表

0.5 in Socket Drive Torsion Grips, Metric

測試配件< » 拉伸夾具 » Torsion and Axial-Torsion Grips » Socket Style » 0.5 in Socket Drive Torsion Grips, Metric » Page 14

0.5 in Socket Drive Torsion Grips, Metric

W-MT03-M_P
W-MT03-M_P

W-MT03-M | Socket drive set (Metric)

Includes:

  • Two complete 12 point metric socket sets with 15 pieces
    each ranging from 10 mm to 24 mm in 1 mm increments.
  • Two 1/2 inch drive adapters for motor and torque cell
    mounting.
  • Adapting thread: M12 x 1.75m
  • Max Capacity: 57 Nm (500 lbf-in)
View Accessories Catalog
規格表
規格表
Accessory Length 60.3 mm (2.375 in)
Lower Fitting M12x1.75mRH ( )
Specimen Diameter 10 - 24 mm ( in)
Torque Capacity 57 Nm (500 in-lb)
Upper Effective Length 47.6 mm (1.875 in)
Upper Fitting M12x1.75mRH ( )

Support Table, Heavy Duty; For use with all Dual Column Table Top Models

測試配件< » 機架配件 » Loadframe Support Tables/Bases » Support Table, Heavy Duty; For use with all Dual Column Table Top Models » Page 14

Support Table, Heavy Duty; For use with all Dual Column Table Top Models

No image available - Instron

2910-056 | Heavy Duty Support Table

Heavy Duty Load Frame Support Table for All Dual Column Table Top Models, including extra high, extra wide versions.

Provides convenient working height and leg room for operation while seated. Capacity: 679 kg (1500lb) evenly distributed load. Table top dimension: 762 x 1524 mm (30 x 60 in). Height adjustable from 635 to 813 mm (25 to 32 in).

View Accessories Catalog
文獻 規格表
文獻

Heavy-Duty Load Frame Support Table

The 2910-056 heavy-duty load frame support table optimizes the performance of tabletop testing systems by providing stability and increased safety. The support table maintains a level working surface, distributes the weight of a dual column electromechanical tabletop load frame, and establishes improved ergonomic conditions for users.

  • 产品
  • 10/25/2010
  • 255.16 KB

規格表

Large Collet Grip Assembly, Range 6.3 – 14.25 mm (0.25 in – 0.5625 in)

測試配件< » 拉伸夾具 » Torsion and Axial-Torsion Grips » Collet Style » Large Collet Grip Assembly, Range 6.3 – 14.25 mm (0.25 in – 0.5625 in) » Page 14

Large Collet Grip Assembly, Range 6.3 - 14.25 mm (0.25 in - 0.5625 in)

W-MT02-B | Large Collet Grip Set for MT Systems

Set includes:

  • Two collet chucks with M12 x 1.75m adapting threads
  • Two complete sets of collets ranging from
    6.3 mm to 14.25 mm (0.25 in to 0.5625 in) with 0.8 mm
    (0.03125 in) increments.
  • Effective length each collet chuck: 83 mm (3.27 in)
  • Capacity: 57 Nm (500 lbf-in)
View Accessories Catalog
規格表
規格表
Accessory Length 94.6 mm (3.725 in)
Lower Fitting M12x1.75mRH ( )
Specimen Diameter 6.30 - 14.25 mm (0.2500 - 0.5625 in)
Torque Capacity 225 Nm (2000 in-lb)
Upper Effective Length 82.6 mm (3.250 in)
Upper Fitting M12x1.75mRH ( )

平均夾式延伸計 – 1 英吋軌距長度

測試配件< » 平均夾持式引伸計 » 平均夾式延伸計 – 1 英吋軌距長度 » Page 14

平均延伸計，1 英吋軌距長度，+5 / -2% 應變，單一輸出

參考目錄號 2650-564

Averaging Axial Clipon Extensometer
Averaging Axial Clipon Extensometer

平均延伸計，1 英吋軸向標距，提供單一平均軸向輸出。

特點：

  • 可更換的試件接觸件，適用於各種材料和試件
  • 簡單的單手安裝和拆卸
  • 堅固的設計，可在嚴苛條件下可靠運行
  • 符合 ASTM E83 B-1、ISO 9513 等級 0.5 和 ISO 527（附錄 C）

此引伸計提供單一平均軸向輸出。它具有電子校準功能，並且可以自我識別，適用於 3300、3400、4200、4300、4400、4500、5500、5800、5900、6800、8500、8800 Tower 和 8800MT 系列系統。

規格 文獻
規格
標距 mm (1 in)
軸向行程 mm (-0.02 to +0.05 in)
% 行程 (軸向) -2 to +5 % ( )
試片厚度 0 - 34 mm (0 - 1.34 in)
試件寬度 0.1 至 55 mm（0.004 至 2.17 英吋）
溫度等級 -200 至 200 °C（-328 至 392 °F）
配件高度 40 mm（1.6 英吋）
配件長度 110 mm（4.3 英吋）
配件寬度 120 mm（4.7 英吋）
文獻

Transverse Extensometer, range +/- 2.5 mm

測試配件< » 橫向夾持式延伸計 » Transverse Extensometer, range +/- 2.5 mm » Page 14

Transverse Extensometer, range +/- 2.5 mm

W-E404-F | Transverse / Diametral Strain Gauge Extensometer

+/- 2.5 mm travel

For general purpose transverse or diametral strain measurement
on axially loaded specimens. Used for measurement of Poisson's ratio
on anisotropic materials like many composites and similar applications.

Specifications:

  • Specimen Width or Diameter: 0 to 25 mm (0 to 1.0 in)
  • Travel: +/- 2.5 mm
  • Temperature Range: -40°C to 100°C (-40°F to 210°F)
  • Standard Instron 25 pin connector.
View Accessories Catalog
文獻 規格表
文獻

W-E404 Series Transverse Extensometers

W-E404 Series Transverse Extensometers are designed for measuring transverse displacements. They are self-supporting on the test specimen and will work on any width or diameter specimen from 0 to 25 mm(1 in).

  • 产品
  • 12/10/2007
  • 452.3 KB

規格表

Micro Pneumatic Grips, Side Action. Rated capacity: 10 N

測試配件< » 拉伸夾具 » Microelectronics Tensile Grips » Micro Pneumatic Grips, Side Action. Rated capacity: 10 N » Page 14

Micro Pneumatic Grips, Side Action. Rated capacity: 10 N

2712-101 | Micro Pneumatic Grips, Side Action

Capacity: 10 N (2 lb, 1 kgf).

Temperature range: -10 °C to 80 °C (14 °F to 176 °F). Maximum specimen width: 3 mm (0.12 in).

Maximum specimen thickness: 0.8 mm (0.03 in).

Weight without lock ring: 45 g.

Weight with lock ring: 80 g.

Upper and Lower fitting: Type Om (12mm connection with 6mm clevis pin).

Grips have one fixed and one moving face and provide a convenient method for clamping miniature specimens. 

A large access area for repeatable and accurate specimen alignment is provided, making the grips suitable for testing of miniature specimens like fine wires, thin films or single filaments. 

Foot switch actuation means the operator´s hands are free for accurate specimen placement in the grip. The grip is made of lightweight material and is suitable for both monotonic and low cyclic fatigue testing.

Requires an automatic air control kit.

View Accessories Catalog
規格表
規格表
Capacity 0.01 kN (2 lbf)
Lower Fitting 6 mm clevis pin (Type Om) ( )
Temperature Rating -10 to +80 °C (14 to +176 °F)
Upper Fitting 6 mm clevis pin (Type Om) ( )

Safety Guard for ElectroPuls E1000 Test Instrument

測試配件< » 機架配件 » Electropuls All-Electric Dynamic Test Systems » Safety Guard for ElectroPuls E1000 Test Instrument » Page 14

Safety Guard for ElectroPuls E1000 Test Instrument

1300-301 | Safety Guard for ElectroPuls E1000 Test Instrument

Provides an integrated polycarbonate based guard with a hinged door to prevent operator access to test space when the E1000 is at high power. The guard is also designed to minimize hazards associated with specimen failure.

Includes interlock with ElectroPuls controller to prevent the instrument being switched into high power mode whilst the door is open. Also includes key-switch to over-ride the interlock in extreme cases allowing the machine to operate at high power with the guard door open.

NOTE: Only compatible with 8800 Tower controller

View Accessories Catalog
規格表
規格表
Accessory Depth - Door Closed 481 mm (18.9 in)
Accessory Depth - Door Open 886 mm (34.9 in)
Accessory Height - Door Closed 876 mm (34.5 in)
Accessory Height - Door Open 876 mm (34.5 in)
Accessory Width - Door Closed 835 mm (32.9 in)
Accessory Width - Door Open 932 mm (36.7 in)

Quick Clamping System for Test-Setup-Pallets

測試配件< » 碰撞類比配件 » Quick Clamping System for Test-Setup-Pallets » Page 14

Quick Clamping System for Test-Setup-Pallets

Quick Clamping System for Test-Setup-Pallets

The quick clamping mechanism allows standardized mounting of any type of structures to the sled. The installation and set-up of the test object can be carried out in preparatory rooms on pallets. The configured pallets are transported to the test sled by a crane and clamped on the sled in just a few minutes.

The pallets can be standardized universal pallets for component tests or pallet frames for the construction of reinforced body shells. Standardized pallets may be used or customers may adapt their own fixtures and test bucks to the Instron quick-clamp system.

Furthermore, the pallet design with the necessary interfaces to the INSTRON quick clamping mechanism can be developed by the test laboratory.


Back to CSA.

供使用
供使用

Dynamic Extensometer 10mm GL ±1mm Travel

測試配件< » Axial Clip-on » 動態應變片引伸計 » Dynamic Extensometer 10mm GL ±1mm Travel » Page 14

Dynamic Extensometer 10mm GL ±1mm Travel

2620-603 | Dynamic Extensometer 10mm GL ±1mm Travel

Dynamic Extensometer for direct strain measurement and closed loop strain control. Suitable for tensile, compressive & fatigue testing, the extensometer has a 10mm gauge length with a travel of ±1mm giving ±10% strain. 

It includes a 15mm extender to give a gauge length of 25mm and ±4% strain and a 40mm extender to give a gauge length of 50mm and strain of ±2%. 

Temperature range: -80C to +200C. Compatible with 8800 and 8500Plus controllers. May be immersed in acetone, silicone or alcohol.

View Accessories Catalog
文獻 規格表
文獻

2620 Series Dynamic Strain Gauge Extensometer

Wide operating temperature range, from -80 °C to 200 °C (-112 °F to 392 °F)
Designed to meet the requirements of ISO 9513, BS 3846 and ASTM E 83

  • 产品
  • 01/05/2005
  • 2.56 MB

2620-600 Series Dynamic Strain Gauge Extensometers – Reference Manual

This guide provides instructions on how to use your system components and controls, procedures for setting limits, calibration and other frequently performed operating tasks.

  • Manual
  • 07/22/2020
  • 3.71 MB

規格表