Pneumatic Wedge Action Grips; Capacity: 100 kN

測試配件< » 拉伸夾具 » Pneumatic Wedge Action Grips » Pneumatic Wedge Action Grips; Capacity: 100 kN » Page 13

Pneumatic Wedge Action Grips; Capacity: 100 kN

2716-111 | Pneumatic Wedge Action Grips

Capacity: 100 kN (20,000 lb, 10,000 kg)

Upper and lower fittings: Type Dm (1.25 in connection with 1/2 in clevis pin)

Maximum specimen thickness: 40 mm (flat)

Maximum specimen width: 75 mm (flat)

Maximum specimen diameter: 50 mm (round)

Clamping length: 70 mm

Temperature range: ambient only

Requires faces

Includes an air distribution kit with both, 1/4 NPTM (7/16-20), and 1/4 inch hose barb end connections

An Automatic Air Control Kit or Footswitch is recommended

View Accessories Catalog
文獻 附加元件 規格表
文獻

2716 Series Pneumatic Wedge Action Grips Data Sheet

The Pneumatic Wedge Action Grips, available in 100 or 200 kN, provide a convenient method of clamping both large round and flat specimen shapes, up to a 50 mm (2 in) diameter, or flat specimens up to 40 mm (1.57 in) thick respectively. V-face grips are used for round specimens by design and have a reduced area at the center that compromises their ability to absorb high-energy breaks without fracture. This grip uses a split V-face configuration that allows the break energy to be dissipated without damaging the faces.

  • 产品
  • 08/20/2014
  • 152.52 KB

附加元件
規格表

雙軸延伸計 25 mm 軸向標距長度 2 軸向 1 橫向


測試配件<
»
Biaxial Clip-on
»
雙軸延伸計 25 mm 軸向標距長度 2 軸向 1 橫向
»
Page 13


雙軸延伸計 25 mm 標距長度；2 軸向與 1 橫向

型錄編號 2650-571

雙軸延伸計 25 mm 軸向標距長度，提供兩組獨立軸向與一組橫向應變量測。

特點：

  • 可更換的試件接觸件，適用於各種材料和試件
  • 簡單的單手安裝和拆卸
  • 堅固的設計，可在嚴苛條件下可靠運行
  • 符合 ASTM E83 B-1、ISO 9513 等級 0.5 和 ISO 527（附錄 C）

橫向行程 +/- 0.5 mm（應變範圍取決於試樣寬度）

此延伸計提供 2 組獨立軸向輸出與 1 組橫向輸出，需 3 個感測器通道。具電氣校正功能，並可與 3300、3400、4200、4300、4400、4500、5500、5800、5900、6800、8500、8800 Tower 與 8800MT 系列系統自動識別。


查看配件目錄


規格

文獻

規格
軸向行程 -0.5 至 +1.25 mm
標距長度 25 mm
最大串擾 滿量程的 0.5%
行程百分比（軸向） -2 至 +5%
試樣直徑 0.1 至 34 mm (0.004 至 1.34 in)
試樣厚度 0.1 至 34 mm (0.004 至 1.34 in)
試件寬度 0.1 至 55 mm（0.004 至 2.17 英吋）
溫度額定值 -200 至 +200°C（-328 至 +392°F）
行程（橫向） ±0.5 mm

文獻

Custom Thermal Testing

測試配件< » 環境試驗箱和爐具 » Custom Thermal Testing » Page 13

Custom Thermal Testing

The Custom Solutions group at Instron has been developing accessories for unique thermal applications to meet our customers’ unique needs for decades.  Your specimen acts differently in different environments and your testing should match, that's why we will develop thermal testing accessories that allow the ultimate flexibility in testing.  Whether your testing in super cooled or extremely heated environments using a new frame or using your current set-up, we will work diligently to understand your goals and ensure they are met or exceeded.  Please browse the gallery above to see some of our recent projects.


Click here to see our existing customized thermal solutions specific applications.

Biaxial Extensometer 25 mm Axial Gauge Length 1 Axial 1 Transverse

測試配件< » Biaxial Clip-on » Biaxial Extensometer 25 mm Axial Gauge Length 1 Axial 1 Transverse » Page 13

Biaxial Extensometer 25 mm Axial Gauge Length 1 Axial 1 Transverse

Biaxial Extensometer 25 mm Axial Gauge Length providing one averaged axial and one transverse strain measurement.

Features:

  • Replaceable specimen contacts to suit a range of materials and specimens
  • Simple, single handed, attachment and removal
  • Robust design for reliable operation under demanding conditions

Meets ASTM E82 B-1, ISO 9513 grade 0.5 and ISO 527 (annex C)

Transverse Travel: +/-0.5 mm (Strain range depends on specimen width)

The extensometer provides a single averaged axial output along with a single transverse output and requires 2 sensor channels. It has electrical calibration and is self-identifying with 3300, 3400, 4200, 4300, 4400, 4500, 5500, 5800, 5900, 6800, 8500, 8800 Tower, and 8800MT Series Systems.

View Accessories Catalog
文獻 規格表
文獻

Averaging Axial and Biaxial Clip-On Extensometers

These bi-axial and averaging axial clip-on extensometers use strain gauges for measurement and are constructed from high-strength aluminum, titanium, and stainless steel. All of the extensometers feature simple, single-handed operation. The extensometer incorporates automatic electrical calibration and transducer recognition including a unique digital serial number.

  • 产品
  • 05/12/2021
  • 1008.68 KB

規格表

0.375 in Keyless Drill-Type Chuck Assembly

測試配件< » 拉伸夾具 » Torsion and Axial-Torsion Grips » Chuck Style » 0.375 in Keyless Drill-Type Chuck Assembly » Page 13

0.375 in Keyless Drill-Type Chuck Assembly

W-MT01 | Universal Key-Less Drill-Type Chucks for MT Systems

Two chucks are provided.

  • Specimen range from 1.6 mm to 12.7 mm
    (0.063 in to 0.5 in.)
  • Chuck to drive and torque cell adapting thread:
    M12-1.75m
  • Effective length each chuck: 89 mm (3.5 in)
  • Specimen insertion depth:
  • 47 mm (1.875 in) up to 6 mm (0.24 in) diameter
  • 36 mm (1.438 in) up to max diameter
  • Capacity: 22.5 Nm (200 lbf-in)

NOTE: Capacity is dependant on specimen geometry. When testing smooth, round specimens, the fixture may not be able to reach full capacity without slippage.

View Accessories Catalog
規格表
規格表
Accessory Length 96.5 mm (3.80 in)
Lower Fitting M12x1.75mRH ( )
Specimen Diameter 9.5 mm (0.375 in)
Torque Capacity 22.5 Nm (200 in-lb)
Upper Effective Length 76.2 mm (3.00 in)
Upper Fitting M12x1.75mRH ( )

Camera Outriggers

測試配件< » 碰撞類比配件 » Camera Outriggers » Page 13

Camera Outriggers

Designed for low mass and high stiffness, the Instron camera outriggers provide a stable mounting point for high speed cameras whilst preserving the performance of the test system.

Includes 4 individual support fixtures for mounting and adjusting cameras on the sled. Proven design maintains access to the test object from both sides of the sled to facilitate test set up and exchange of test components.

Allows installation of up to 4 cameras with 5kg mass each.

供使用
供使用

Crack Opening Displacement (COD) Gauge 10/4

測試配件< » 裂縫開口位移(COD)量測器 » Crack Opening Displacement (COD) Gauge 10/4 » Page 13

Crack Opening Displacement (COD) Gauge 10/4

2670-132 | Crack Opening Displacement (COD) Gauge 10/4

  • Gauge Length: 10mm (0.394inches)
  • Travel: 4mm (0.157inches)
  • Temperature range: -200°C to +200°C (-328°F to +392°F)
  • Complies to the requirements of ASTM E399-09
View Accessories Catalog
文獻 規格表
文獻

2670 Series COD Gauges

Instron® Crack Opening Displacement transducers are designed
specifically to perform standard ASTM and ISO fracture mechanics
tests (both cyclic and static), covering all common specimen
geometries (CT, SEB, Centre Crack, Arc Shaped).
Each model offers class leading linearity, whilst being rugged
enough to withstand the high energy release common in many
of these applications and can be used at both elevated and sub
ambient temperatures.
These gauges comply with requirements laid down in ASTM E399-09.

  • 产品
  • 02/01/2013
  • 506.56 KB

規格表

Puncture Fixture per ASTM D5748, D4649

測試配件< » 剝離、摩擦和穿刺測試夾具 » Puncture Fixture per ASTM D5748, D4649 » Page 13

Puncture Fixture per ASTM D5748, D4649

2810-501

Puncture Fixture per ASTM D5748-95, D4649

Capacity: 4.4 kN (1,000 lbf)

Probe: Tip with 0.75 in pear shaped, Teflon coated with 11 in shaft

Clamping ring inner diameter: 4 in

Lower fitting: Type Dm (1.25 in connection with 1/2 in clevis pin)

Upper fitting: Type Om (12 mm connection with 6 mm clevis pin)

Includes a 6 in square specimen cutting template

View Accessories Catalog

3-Point and 4-Point Bend Fixture

測試配件< » 彎曲夾具 » 3 and 4 Point Fatigue Flexure Fixtures » 3-Point and 4-Point Bend Fixture » Page 13

3-Point and 4-Point Bend Fixture

Instron 2810-600 dynamic flexure fixture
Instron 2810-600 dynamic flexure fixture 3-Point and 4-Point Bend Fixture

Suitable for both low force dynamic and static testing along with dental standards ISO 9917, ISO 6872, ISO 4049 or ISO 20795 the low-force 3-Point bend fixture is designed to be compatible with ElectroPuls E1000. The specimen is supported on two lower anvils and the load is applied in the center of the specimen by a single upper anvil.  The t-slot base allows adjustment of the lower span from 15 - 80mm (0.59 - 3.15in) allowing for variable specimen lengths and is submersible to be compatible with an optional fluid bath and recirculator.

Optional Accessories

4-Point Bend Fixture Conversion Kit (2810-605): Used to convert 2810-600 from a 3-point to a 4-point bend fixture, the 4-point bend conversion kit has a variable span of 5 - 40mm (0.19-1.57in) and is suitable for both static and dynamic testing. The test specimen is supported on two lower anvils while the load is evenly applied by two upper anvils.

Features

• 3 kN (675 lbf) capacity
• Support span 15 – 80 mm (0.59 – 3.15 in) 

Application Range 

• Bend testing of small components, plastics, wood, and composites 
• Specimen shapes: Flat and round 
• Suitable for both static & fatigue testing  
• Compatible with ElectroPuls E1000

View Accessories Catalog
文獻 相關項目 規格表
文獻

3 Point 4 Point Bend Fixture 2810-600

The 3-Point bend fixture is designed to easily provide the capability of a 3-point flexure test; it is suitable for both Dynamic & Static testing. The specimen is supported on two lower anvils and the load is applied in the centre of the specimen by a single upper anvil. The fixture has a variable span from 15 – 80 mm (0.59 – 3.15 in).

  • 产品
  • 07/26/2016
  • 290.91 KB

相關項目
規格表

油壓鍥型夾具 1000 kN (225,000 lbf)

測試配件< » 拉伸夾具 » Hydraulic Wedge Action Grips » 油壓鍥型夾具 1000 kN (225,000 lbf) » Page 13

油壓鍥型夾具 1000 kN (225,000 lbf)

Catalog no. W-5340

1000 kN Hydraulic Wedge Action Grips
1000 kN Hydraulic Wedge Action Grips

油壓鍥型夾具，適用於1000KX/KPX機台。容量為1000 kN

(225,000 lbf, 100,000 kgf)

包含：

  • 前開口設計
  • 夾持之開關與空檔位置的控制
  • 夾持之開關與空檔位置的控制
  • 夾具高度包括連接器：

上夾具：648 mm (25.5 in)
下夾具：457 mm (18 in)

  • 夾具寬度：660 mm (26 in)
索取配件型錄
規格
規格

Puncture Probe Set, Magness-Taylor

測試配件< » 食品測試夾具 » Puncture Probe Set, Magness-Taylor » Page 13

Puncture Probe Set, Magness-Taylor

Catalog no. 2830-005

Magness-Taylor Puncture Probe
Magness-Taylor Puncture Probe

2830-015 | Puncture Probe Set, Magness-Taylor

Includes probes of 7.9 mm (0.31 in) and 11.1 mm (0.44 in) diameter.

Upper fitting: Requires Chuck 2830-036.

Lower fitting: Requires optional support plates with Drip tray S5400A and Support Frame S4427A.

View Accessories Catalog
文獻 供使用 相關項目 規格表
文獻

Food Texture Fixtures Probes and Chucks

Flat-end puncture probes produce a shear stress in the specimen. The force required to cause shearing as the probe penetrates the specimen relates to texture properties such as firmness and hardness.

  • 产品
  • 11/06/2018
  • 686.36 KB

供使用
相關項目
規格表

油壓鍥型夾具 1500kN (337,500lbf)

測試配件< » 拉伸夾具 » Hydraulic Wedge Action Grips » 油壓鍥型夾具 1500kN (337,500lbf) » Page 13

油壓鍥型夾具 1500kN (337,500lbf)

Catalog no. W-5330

1500 kN Hydraulic Wedge Action Grips
1500 kN Hydraulic Wedge Action Grips 1500 kN Hydraulic Wedge Grips testing stranded cable

油壓鍥型夾具，適用於1500KX/KPX機台。容量為1500 kN

(337,500 lbf, 150,000 kgf)

包含：

  • 前開口設計
  • 夾持之開關與空檔位置的控制
  • 夾持速度與壓力可以進行調整
  • 夾具高度包括連接器：

上夾具：743 mm (29.25 in)
下夾具： 648 mm (25.5 in)

  • 下夾具： 648 mm (25.5 in)
索取配件型錄
規格
規格