문헌
브로셔,매뉴얼,백서 및 사례 연구를 위한 문헌 라이브러리
20 KN 3-Point and 4-Point Bend Fixture – 2810‑500/505
The 3-Point bend fixture is designed to easily provide the capability of a 3-point flexure test; it is suitable for both Dynamic & Static testing. The specimen is supported on two lower anvils and the load is applied in the centre of the specimen by a single upper anvil. The fixture has a variable span from 18 – 148 mm (0.7 – 5.82 in). The lower part is fitted to the load cell, which should be base-mounted, and the upper part is fitted to the actuator via a flange attachment.
제품소개 04/10/2016 1.11 MB
20 kN Compression Platens 2840-030
Instron® 2840-030 Compression Platens incorporate LVDT mounting and are designed for reliable compressive high-cycle fatigue testing.
제품소개 04/10/2016 473.57 KB
2742-206 Mechanical Grips
Designed to suit ElectroPuls test instruments, the 2742-206 mechanical wedge action grips are suitable for tension, compression, torsion, and reverse-stress testing on a wide range of specimens and materials. The grips are mechanically operated and the open-fronted design provides easy specimen insertion, positioning, and clamping.
제품소개 02/16/2016 1.02 MB
ElectroPuls™ Electrodynamic Test Instruments
ElectroPuls instruments are state-of-the-art electrodynamic test systems for dynamic and static tests on materials & components. Powered entirely from a single-phase mains supply, they feature the latest in testing technology and a host of other user-oriented features.
제품소개 02/03/2016 3.24 MB
High-Temperature Extensometers | CP118413
The Instron range of High-Temperature Extensometers are ideally suited for testing materials such as advanced composites, metals, and polymers at elevated temperatures. This series incorporates a capacitive sensor that does not require any cooling. The extensometers are supplied with a special sensor conditioner unit providing a 0-10 V output with exceptionally low noise. These extensometers can be attached to round and flat specimens to perform tensile, compression, and cyclic tests.
제품소개 08/07/2015 457.17 KB
ElectroPuls Pullrod Kit
The Electropuls® Pullrod Kit is a set of 4 different length pullrods suitable for fatigue, tension, compression, and torsion testing. The Pullrod kit optimizes compatible accessories for maximum range of operation when used on the new ElectroPuls test instruments (except E1000) in combination with a 3119-605 chamber.
제품소개 06/22/2015 1.32 MB
TestMaster AT3
The Instron® TestMaster AT3 (tensile) and AT3+ (flex) Automated Testing System utilizes an innovative design for the automatic tensile and/or flexural testing of plastic specimens. Meeting the testing requirements of ASTM D638 and D790, ISO 527 and 178, as well as other testing standards, this system offers many of the benefits of our robotic AT6 systems, but in a smaller footprint.
제품소개 05/19/2015 2.28 MB
2701 221 Specimen Holder
he combined specimen holder and specimen alignment device (patent pending) is an optional item for 2712-04X pneumatic side-action grips. The spring-loaded grippers hold the specimen while the operator closes the grips prior to starting the test. This avoids the pinch hazard associated with manually holding the specimen near the jaw faces during grip closure. The built-in adjustable specimen centering device ensures repeatable alignment and speedy operation.
제품소개 05/06/2015 199.19 KB
TrendTracker Software Visualization Capabilities
Technical brief to educate customers on the use of visualization features within TrendTracker Software for Quality Control.
제품소개 03/10/2015 789.39 KB
SVE 2 | Non-Contacting Video Extensometer Data Sheet
While contacting extensometers offer accurate strain measurement, they can have an adverse effect on results due to influence or slippage on the specimen by knife edges, damage to the specimen at break, or wear of moving parts. As a result, Instron® introduced the first commercial video extensometer in 1991. The newest Standard Video Extensometer (SVE 2) is a high-performance, non-contacting extensometer that is ideally suited for everyday applications such as rubber, soft plastics, elastomers and other materials with high strain to failure. Additionally, the SVE 2 is available with various Fields of View (FOV) that suit applications in both ambient and non-ambient temperature conditions.
제품소개 12/11/2014 414.47 KB