문헌
브로셔,매뉴얼,백서 및 사례 연구를 위한 문헌 라이브러리
CEAST Melt Flow Series Brochure
Flow properties of molten plastics are a critical characteristic requiring good knowledge and control. The Instron® Melt Flow Testers are specifically designed for easy
and accurate measuring of the Melt Mass-Flow Rate (MFR) and the Melt Volume-Flow Rate (MVR). CEAST Melt Flow Testers range from systems that perform a simple
manual test procedure to semi-automated testing systems performing multiple weight tests.
제품소개 07/03/2013 1.07 MB
MicroTorsion Series: Low-Capacity Torsion Testing Systems
The preferred solution for low-force torsion testing and component in-service simulation, the MT MicroTorsion systems are available in two standard models with force capacities up to 225 N-m (2,000 lbf-in). The compact design requires minimal lab space and offers superior frame stiffness and alignment. Packaged with Instron high-performance control electronics, the MT Series provides highly accurate test data and control for testing a product portfolio that includes wire, fasteners, switches, and springs used in the biomedical, automotive, and aerospace industries. The system includes an integrated guard and safety control system that meets the stringent requirements for the European CE mark.
제품소개 06/12/2013 567391
Pneumatic Cord and Yarn Grips | Catalog Number 2714-031
Instron’s pneumatic cord and yarn grips provide a convenient method for clamping fiber, cord, yarns and fine wires to reduce the problem associated with testing these materials.
제품소개 06/11/2013 490.84 KB
2630 시리즈 변형계 연신계
2630-100 시리즈 연신계는 신속한 부착 속도와 사용 편의성을 제공합니다. 가볍고 견고한 크로스 브레이스 디자인은 물리적 왜곡으로 인한 오류를 제거하고 내장 보호 기능은 과도한 확장으로 인한 손상을 방지할 수 있습니다.
제품소개 06/03/2013 551.73 KB
Mini High-Temperature Pneumatic Wedge Grips
The mini high-temperature wedge grips offer an effective
gripping solution for tensile testing of high elongation
materials under high-temperature conditions. The key feature of these grips are their ability to be pulled out of the chamber porthole, maximizing the test space. The grips are rated from ambient to +150 °C or +200 °C; and are available in 100N and 1kN capacities.
제품소개 05/02/2013 128.59 KB
Rheology Systems for Melt Flow Testers MF20 and MF30
Thermoplastic materials are processed as fluids under the effect of temperature and pressure. The ability of melted materials to
flow under pressure at set temperatures has a fundamental importance in polymer science and technology. The Instron® line of
CEAST Melt Flow Testers are specifically designed for the easy and accurate measuring of the flow properties of plastics according
to the relevant ISO and ASTM international standards.
The renewed line of CEAST melt flow testers includes four different models: MF10, MF20, MF30, and MF50. These range from
manual determination of MFR (melt flow rate) to semi-automated MVR (melt volume rate) measurements involving multiple
weight tests
The versatile CEAST MF20 and MF30 are single-weight systems that are ideal for performing tests according to ISO 1133 and
ASTM D1238 Procedures A, B, and C. Compliant with ISO 1133-2 requirements, they can perform reliable tests on commodity
materials, as well as on the most temperature- and moisture-sensitive special grade materials. Many different options are
available: from primary test inspection to integrated test automation solutions.
제품소개 04/29/2013 666.45 KB
Automated Elastomers Testing System
Instron® Automated Testing Systems for elastomeric/rubber material, utilizing TestMaster automation control software, are ideal for performing unattended tensile and/or tear tests of elastomeric specimens ranging in thicknesses of 0.05 to 10 mm. These systems are designed to meet ASTM D412, D624, ISO 37 and other standards.
제품소개 04/01/2013 911.62 KB
Accessories for CEAST Impact Systems
Accessories for CEAST Drop Tower and Pendulum Impact Testers.
제품소개 03/20/2013 1.71 MB
유압식 측면 작동 그립 (DuraSync)
인스트론 유압식 측면 작동 그립은 고용량 시험을 위해 설계되었으며, 시험 방향에 수직으로 작용하고 인장 하중과 무관하게 시편에 일정한 클램핑 힘을 유지합니다.
제품소개 03/15/2013 1.07 MB
TestMaster Software
Instron’s TestMaster Software is the master controller and sequencer for all of our Automated Testing Systems. TestMaster seamlessly controls all aspects of an automated test sequence that includes: user interface control; I/O control of peripheral components; device control; database communications; simultaneous process states; and visual system status lights.
제품소개 03/12/2013 233.4 KB