문헌
브로셔,매뉴얼,백서 및 사례 연구를 위한 문헌 라이브러리
CEAST SmartRHEO Series: Capillary Rheometer Systems
Thermoplastic materials are processed as fluids under the effect of temperature and pressure. The ability of plastics to be formed into a wide variety of shapes, by the common plastics conversion processes, has a fundamental importance in polymer science and application. The innovative Instron® line of CEAST SmartRHEO Series of Capillary Rheometer systems are designed for an accurate investigation of the rheological properties of polymeric materials.
제품소개 09/22/2014 3.45 MB
Composite Test Fixtures | Flexural and Interlaminar Shear
Interlaminar shear testing is a simple test on easy to prepare polymer composite specimens that measures of the strength of the bond between fibers and matrix. Another common test for polymer composites is flexure testing. The Instron® Modular Flexural and Interlaminar Shear Strength (ILSS) bend fixture system, with a range of interchangeable anvils, is suitable for testing to a number of international standards, including ASTM D2344, D790, EN 2562, EN 2563, ISO 14125, and ISO 14130.
제품소개 09/02/2014 486.43 KB
Automated Plastics Testing System
The Instron® Automated Plastics Testing Systems enable a new dimension of testing productivity. Available as a complete turnkey solution or installed on an existing Instron universal testing machine, these systems have been designed to meet ASTM D638, ISO 527, ASTM D790, ISO 178, and other testing standards, including JIS and DIN.
제품소개 08/26/2014 988.57 KB
Composites Test Fixtures – Compression | Unsupported Gage Section
Compression testing of composites without anti-buckling guide plates, is often preferred as the free unsupported length is more representative of true compression behavior. This method relies on the accuracy of the alignment between the upper fixture and the lower fixture while introducing the compression load. In addition, the natural failure process of the specimen will induce high lateral forces that must be resisted to ensure that forces remain in true compression. In these principles, the IITRI, Wyoming Modified Celanese and Combined Loading Compression fixtures are the same.
제품소개 08/25/2014 750.49 KB
Anti-Buckling Compression Testing Fixture
This anti-buckling fixture is designed for compression testing of rigid plastics and the shear testing of reinforced plastics. It has also been adapted for use with high strength composites.
제품소개 08/25/2014 316.47 KB
Automated Metals Testing System
The Instron® Automated Metals Testing Systems enable a new dimension of testing productivity. Available as a complete turnkey solution or installed on an existing Instron testing machine, these systems have been designed to meet ASTM E8, EN 10002-1, ISO 6892, and other metals testing standards, including JIS and DIN.
제품소개 08/25/2014 1.36 MB
2716 Series Pneumatic Wedge Action Grips Data Sheet
The Pneumatic Wedge Action Grips, available in 100 or 200 kN, provide a convenient method of clamping both large round and flat specimen shapes, up to a 50 mm (2 in) diameter, or flat specimens up to 40 mm (1.57 in) thick respectively. V-face grips are used for round specimens by design and have a reduced area at the center that compromises their ability to absorb high-energy breaks without fracture. This grip uses a split V-face configuration that allows the break energy to be dissipated without damaging the faces.
제품소개 08/20/2014 152.52 KB
Upgrade Your Drop Tower
Is your testing machine costly to maintain? Are you under pressure to automate tests and modernize reports? Then now is a
great time to consider upgrading your aging instrument for an innovative, top-of-the-line new Instron® 9350 Drop Tower.
제품소개 07/29/2014 403.08 KB
Compression Platens W-2004 and W-2005 Series
Instron® Industrial Series Compression Platens are designed to maximize compression testing performance. These high-strength, versatile platens are available in both plane and self-aligning models, and can be easily configured with Instron and other static universal testing machines.
제품소개 07/16/2014 357.88 KB
Syringe Test Fixture – Catalog Number 2870-001
Detailed description of fixture that is designed to evaluate the performance of syringes and syringe/needle combinations. Primary uses are determining breakaway forces at the beginning of injections as well as sustaining forces throughout the injection process.
제품소개 05/06/2014 727.42 KB