Pneumatic Wedge Action Grips; Capacity: 200 kN
2716-121 | Pneumatic Wedge Action Grips
Capacity: 200 kN (40,000 lb, 20,000 kg)
Upper and lower fittings: Type llm (M48 X 2 LH)
Maximum specimen thickness: 40 mm (flat)
Maximum specimen width: 75 mm (flat)
Maximum specimen diameter: 50 mm (round)
Clamping length: 70 mm.
Temperature range: ambient only
Requires faces
Includes an air distribution kit with both, 1/4 NPTM (7/16-20), and 1/4 inch hose barb end connections
An Automatic Air Control Kit or Footswitch is recommended
| Accessory Weight | 52 kg (114 lb) |
|---|---|
| Accessory Width | 300 mm (11.8 in) |
| Capacity | 200 kN (45,000 lbf) |
| Lower Fitting | M48x2mLH (Type IImLH) |
| Temperature Rating | 5 to 65°C (40 to 150°F) |
| Upper Effective Length | Upper: 315 Lower: 315 mm (Upper: 12.4 Lower: 12.4 in) |
| Upper Fitting | M48x2mLH (Type IImLH) |
- Grip Spacer (2716-110/120 Grips)
- Adapter; 2716-110,120 to M30fLH / 6XM10-100BC
- Jaw Faces for Flats (Serrated, 0 - 20 mm) 25 TPI
- Jaw Faces for Flats (Serrated, 20 - 40 mm) 25 TPI
- Jaw Faces for Rounds (Vee-Serrated, 6 - 17.8 mm)
- Jaw Faces for Flats (Serrated, 0 - 20 mm) 16 TPI
- Jaw Faces for Flats (Serrated, 20 - 40 mm) 16 TPI
2716-111 & 2716-121 Wedge Action Grips & Jaw Faces
The Pneumatic Wedge Action Grips, available in 100 or 200 kN, provide a convenient method of clamping both large round and flat specimen shapes, up to a 50 mm (2 in) diameter, or flat specimens up to 40 mm (1.57 in) thick respectively. V-face grips are used for round specimens by design and have a reduced area at the center that compromises their ability to absorb high-energy breaks without fracture. This grip uses a split V-face configuration that allows the break energy to be dissipated without damaging the faces.
- Produtos
- 8/20/2014
- 147.8 KB