Instron
  • Back
  • Home
  • Produtos
    SISTEMAS DE ENSAIOS
    Sistemas Universais de Ensaios
    Durabilidade estrutural
    Sistemas de Ensaios Automatizados
    Sistemas de Ensaios Dinâmicos e de Fadiga
    Crash Simulation
    Máquinas para Ensaios de Torção
    Reômetros e Equipamento para Melt Flow
    Equipamentos para ensaios de impacto pendular ou por queda (Drop Tower)
    HDT e Vicat
    Equipamentos Fora de Produção
    ACESSÓRIOS
    Software
    Células de carga
    Adesão, Atrito, Perfuração
    Câmaras Ambientais e Fornos
    Garras de Tração
    Dispositivos para Flexão
    Pratos de Compressão
    Dispositivos para Área Farmacêutica e Biomédica
    Extensômetros
    Células de carga
    Acessórios de ensaio para eletrônicos e microeletrônica
    Medição de Corpos de Prova e Preparação
    Todos os acessórios
  • Soluções Industriais
    Normas ASTM Normas ISO Outros padrões
    POR INDÚSTRIA
    Automotivo
    Baterias
    Biomédica
    Eletrônica
    materiais
    Compósitos
    Metais
    Plásticos
  • RECURSOS
    Videos
    Webinários
    Eventos
    Notícias
    Blogue
    Como
    Estudos de caso
    Tipos de Ensaio
    Glossário
    Biblioteca de materiais
    Localizador de número de série
    Manuais
  • Serviço e suporte
    Instron Remote Technical Support CICLO DE VIDA DE PRODUTOS TREINAMENTO
    SERVIÇOS
    Calibração e verificação
    Assistência de implementação da Instron
    SUPORTE TÉCNICO
    Perguntas frequentes
    Serviços de atualização de software
    Manuais
    Localizador de número de série
  • Nossa empresa
    CARREIRAS ASSINE NOSSOS BOLETINS DE NOTÍCIAS
    QUEM SOMOS
    Nossa história
    Unidades
    Acreditações e certificados
    Privacidade e Termos
    Acessibilidade
    Aviso de Cookie
    Aviso de privacidade de dados GDPR
    Controle de exportação
    Notificação de privacidade
    termos e Condições
    Termos de uso
  • Fale conosco
  • Brasil
PRODUTOS » Sistemas de Ensaios » Sistemas Universais de Ensaios » Industrial – até 2000 kN » Static Hydraulic Industrial Series » Instron DX Model

Industrial Series DX Models

Entre em ContatoSolicite Um Catálogo De Acessórios
  • Photos
  • Videos
300DX 59 Series
  • 300DX 59 Series
  • DESCRIÇÃO
  • LITERATURA
  • Contate-nos

Designed for high-capacity tension, compression, bend/flex, and shear testing, the DX Models feature a dual test space and single footprint. Understanding the critical importance of operator safety these frames incorporate high-quality materials, componenents, and craftsmanship and are ideal for testing metals, wire rod, fasteners, concrete, and wood.

Features and Benefits

  • Single footprint saves valuable floor space - load frame, hydraulic power supply, and controller combined in a single package
  • Fully open-front grip design improves operator safety and throughput, and allows a limited number of jaw faces to cover a large range of specimen sizes 
  • Two test space design makes changing between tension and compression testing safer and more efficient - no need to remove heavy fixtures 
  • Convenient working height and ergonomic controls increase operator productivity and comfort
  • Ergonomic handset with a fine position adjustment wheel, two programmable softkeys, start, stop and return functions, and variable speed jog
  • Powerful, yet user-friendly materals testing software provides repeatable and reproducible results for simple to sophisticated testing requirements
  • Variable pressure hydraulic power supply provides pressure on demand, reducing heat generation, increasing oil life, and eliminating the need for water cooling
  • Optional closed head grip design available

Range of Models

  • 300DX - 300 kN (67,500 lbf)
  • 600DX - 600 kN (135,000 lbf)

Typical Applications

  • Metals - Bar, Plate, Pipe&Tube, Rebar, Structural
  • Fasteners
  • Wire Rod
  • Composites

Standards

DX Models conform to many international standards, including (but not limited to):
  • ASTM A370, A615, C39, C109, E4, E8, E9, E290, F606
  • ISO 6892-1, 6892-2, 7438, 7500-1, 9513, 15630-1
  • BS 4449
  • EN10002-1, 10002-2
  • JIS Z2241, Z2248

Contact us for additional compliance information

High Force Universal Testing Machines | 100 kN and Above Testing Capacity

Instron® high force universal testing machines perform tensile, compression, bend, peel, tear, and other mechanical tests on materials and products to ASTM, ISO, and other industry standards. These systems are available in a range of sizes and maximum force capacities. From electromechanical systems used to test high-strength metals and advanced composites to static-hydraulic systems for testing materials used in civil infrastructure, Instron has systems suitable for all applications.

  • Produtos
  • 8/10/2020
  • 3.9 MB

Industrial Series DX Models

Featuring a dual test space and single footprint, DX Models are designed for high-capacity tension, compression, bend/flex, and shear testing.

  • Produtos
  • 9/7/2017
  • 0.6 MB

Catálogo do Software de Ensaios Bluehill Universal

Catálogo do Bluehill Universal em PT-BR

  • Produtos
  • 1/12/2018
  • 2.6 MB

DX Static Hydraulic Universal Testing System - Pre-Installation Manual

The information in this document is intended to aid customers in the site preparation, unpacking, lifting, and installation of the Instron Model DX Static Hydraulic Universal Testing Systems. These instructions assume the following: • Your system consists of a frame, a hydraulic power supply, a control unit, a computer system with an Instron materials testing software package, and any testing accessories necessary to secure the specimen in the test space. It is important that the site be adequately prepared in order to avoid unnecessary delays in the installation process and to ensure that the testing system operates without interference from various environmental conditions (i.e. excess building vibrations or extreme temperature and humidity levels).

  • Manual
  • 7/14/2020
  • 1.0 MB

Model DX Static Hydraulic Universal Testing System - Operating Instructions

These instructions describe the function, operation and maintenance for various models of the DX testing systems. If unsure of your specific model, refer to “System identification” on page 14. These instructions assume the following: • You are an operator familiar with the operation of materials testing systems in general. • Your system has been installed in its final location according to the requirements outlined in the system’s Pre-Installation Manual. • Your system consists of a frame, a hydraulic power supply, a control unit, a computer system with an Instron materials testing software package, and any testing accessories necessary to secure the specimen in the test space. • Software test methods that are appropriate for your testing requirements are available. These instructions do not include the development of test methods within the materials testing software. This is covered in more advanced training that can be provided by Instron Service and Training departments.

  • Manual
  • 7/14/2020
  • 2.0 MB

DX Static Hydraulic Universal Testing System - Reference Manual

This Equipment Reference Manual has been prepared to provide customers with assembly drawings and schematics that pertain to the various models of DX Static Hydraulic Universal Testing Systems.

  • Manual
  • 7/20/2020
  • 1.7 MB

DX Static Hydraulic Universal Testing System - System Concepts Manual

These instructions provide additional information beyond what is necessary to operate the various models of the DX testing systems. These instructions are intended for a laboratory or facilities supervisor, or Instron service personnel. These instructions assume the following: • You are an operator familiar with the operation of materials testing systems in general. • Your system has been installed in its final location according to the requirements outlined in the system’s Pre-Installation Manual. • Your system consists of a frame, a hydraulic power supply, a control unit, a computer system with an Instron materials testing software package, and any testing accessories necessary to secure the specimen in the test space. • Software test methods that are appropriate for your testing requirements are available. These instructions do not include the development of test methods within the materials testing software. This is covered in more advanced training that can be provided by Instron Service and Training departments.

  • Manual
  • 7/14/2020
  • 1.8 MB

SEU ENDEREÇO DE EMAIL

Insira o seu endereço de email. Os endereços de email precisam conter o símbolo @. Os endereços de email somente podem conter letras, números e os seguintes caracteres especiais: . ! # $ % & ' * + - / = ? ^ _ ` { | } ~ Os endereços de domínio de email somente pode conter letras, números, pontos (.) e hifens (-).

SUA MENSAGEM

750 Character Max Insira a sua mensagem Os endereços de email somente podem conter letras, números e os seguintes caracteres especiais: . ! # $ % & ' * + - / = ? ^ _ ` { | } ~
AVANÇAR Marque para indicar que você é um visitante que está retornando…

BEM-VINDO DE VOLTA!

SUAS INFORMAÇÕES DE CONTATO

Insira o seu primeiro nome. Please use letters and numbers only.
Insira o seu sobrenome. Please use letters and numbers only.
Selecione o seu país
Insira a sua empresa Please use letters and numbers only.
Insira o seu endereço Please use letters and numbers only.
Insira a segunda linha do seu endereço Please use letters and numbers only.
Insira a terceira linha do seu endereço Please use letters and numbers only.
Insira o seu município Please use letters and numbers only.
Insira a sua cidade Please use letters and numbers only.
Insira o seu estado/província
Insira o seu CEP/Código postal. Please use numbers only
Insira o número do telefone. Please use numbers only

Confirme que você concorda com a nossa política de privacidade e cookies para submeter este formulário.

Eu concordo com os termos e condições da Política de Privacidade e Cookies da Instron

Inscreva-se para receber notícias da Instron!
Marque esta caixa para receber emails pertinentes à área comerciais da Instron sobre produtos, eventos próximos e muito mais!

Selecione um opção de inscrição Um ou mais dos campos necessários está em branco, complete o formulário para continuar Um ou mais campos contêm erros de formatação, corrija os erros para continuar. Confirme que você concorda com a nossa política de privacidade e cookies para submeter este formulário.

SELETOR DE REGIÃO

Dismiss Region Selector

Americas

  • North America
  • Brasil
  • South America

All Other Countries

  • Global Site

Europe

  • France
  • Deutschland
  • Italia
  • Polska
  • España
  • United Kingdom

Asia Pacific

  • 中国
  • India
  • 日本
  • 대한민국
  • 台灣
  • ประเทศไทย
Instron Logo White
INFORMAÇÕES DE CONTATO

Rua Quirino Zagonel, 257,
São José dos Pinhais,
PR, CEP 83020-250

Vendas:  (41) 3035-9400

Serviços:  (41) 3035-9400

Geral:  +55 41 3035-9400

LINKS ÚTEIS
  • Sistemas de ensaio
  • Software
  • Acessórios
  • Catálogo
  • Biblioteca
  • Soluções de Ensaios
  • Webinários
  • Estudos de caso
  • Eventos
  • Carreiras
  • Notícias
  • Glossário
Policies / Legal
  • Política de Cookies e Privacidade
  • Termos de uso
  • Controle de exportação
  • Aviso de dados segundo o GDPR
CONECTE-SE CONOSCO
INSCREVA-SE PARA NOSSO BOLETIM DE NOTÍCIAS
ENDEREÇO DE E-MAIL
© 2019 Illinois Tool Works Inc. Todos os direitos reservados.
[email protected]
  • Política de Cookies e Privacidade
  • Termos de uso
  • Controle de exportação
  • Aviso de dados segundo o GDPR
Back
To Top