Industrial Series KPX Models

Instron® high force universal testing machines perform tensile, compression, bend, peel, tear, and other mechanical tests on materials and products to ASTM, ISO, and other industry standards. These systems are available in a range of sizes and maximum force capacities. From electromechanical systems used to test high-strength metals and advanced composites to static-hydraulic systems for testing materials used in civil infrastructure, Instron has systems suitable for all applications.

• Produtos
• 8/10/2020
• 3.9 MB

Industrial Series KPX Models are designed for high-capacity tension, compression, bend/flex, and shear testing. Featuring an ultra-large single test space and adjustable crosshead options, these frames deliver exceptional flexibility for a wide range of testing applications and are available in capacities ranging from 600 kN (135,000 lbf) to 3,500 kN (800,000 lbf).

• Produtos
• 1/20/2017
• 421.5 KB

Catálogo do Bluehill Universal em PT-BR

• Produtos
• 1/12/2018
• 2.6 MB

Instron® hydraulic side-acting grips are an innovative solution for high capacity testing and deliver enhanced gripping performance, usability and operator safety over traditional grip designs. These grips maintain a constant clamping force on the specimen that acts perpendicular to the direction of testing and is independent of tensile loading.

• Produtos
• 3/15/2013
• 1.1 MB

Instron® hydraulic wedge grips provide an innovative solution for high capacity testing and deliver enhanced gripping performance, usability, and operator safety.

• Produtos
• 11/11/2011
• 1.0 MB

The AutoX750 is a high-resolution, long-travel automatic contacting extensometer that is used to determine a variety of calculations including modulus, offset yield, plastic elongation to failure (non-proportional), and r and n values for sheet metals.

• Produtos
• 8/15/2013
• 1.3 MB

The information in this document is intended to aid customers in the site preparation, unpacking, lifting, and installation of the Instron Model KPX Static Hydraulic Universal Testing Systems.

• Manual
• 7/21/2020
• 1.0 MB

These instructions describe the function, operation and maintenance for various models of the KPX testing systems.

• Manual
• 7/22/2020
• 1.3 MB

These instructions provide additional information beyond what is necessary to operate the various models of the KPX testing systems. These instructions are intended for a laboratory or facilities supervisor, or Instron service personnel. These instructions assume the following: • You are an operator familiar with the operation of materials testing systems in general. • Your system has been installed in its final location according to the requirements outlined in the system’s Pre-Installation Manual. • Your system consists of a frame, a hydraulic power supply, a control unit, a computer system with an Instron materials testing software package, and any testing accessories necessary to secure the specimen in the test space. • Software test methods that are appropriate for your testing requirements are available. These instructions do not include the development of test methods within the materials testing software. This is covered in more advanced training that can be provided by Instron Service and Training departments.

• Manual
• 7/22/2020
• 1.4 MB

This Equipment Reference Manual has been prepared to provide customers with assembly drawings and schematics that pertain to the various models of KPX Static Hydraulic Universal Testing Systems. These drawings are provided for your use and Instron personnel use only. These drawings are the property of Instron and may be subject to return upon demand. The contents of this manual must not be copied or submitted to outside parties for use or examination.

• Manual
• 7/22/2020
• 2.2 MB