With an array of implant sizes and geometries, angled dental implants can be mounted into a variable angle fixture for testing to the ISO 14801 standard. The fixture needs to ensure that the mounting does not over constraint the implant nor generate large lateral forces that can damage the load cell or the testing machine. Pre-angled dental implants should be tested in ambient air using a frequency of 15 Hz.

As with straight dental implants, pre-angled dental implants can also be tested in an aqueous environment, if corrosion fatigue is expected to occur. The fixture can be mounted within a fluid bath to test the implant in saline solution or another physiological medium and the temperature maintained at 37 °C.

Our E1000 or E3000 ElectroPuls^® linear motor test instruments provide an ideal platform for testing and characterizing dental implant performance. If studies of torque required for dental implants need to be undertaken, we suggest using the ElectroPuls E3000 Linear-Torsion test instrument to conduct compression and torsion testing.

We recommend that you review the standard to fully understand its requirements.