Lower Force Dynamic Fatigue Testing Plastics
Plastics will fail at stress levels well below their tensile or compressive strengths when subjected to cyclic loading. They will fail more severely when subjected to a combination of tensile and compressive loads. Plastic materials are highly non-linear and demonstrate different properties when subjected to varying temperatures, and it is important for designers to look at the characteristics and fatigue performance of these materials before using within designs.
When performing these low-force dynamic fatigue tests, we suggest using our ElectroPuls™ E1000 All-Electric Dynamic Test Instrument, in combination with a temperature chamber, to evaluate the performance of plastic materials at both low and high temperatures. Fatigue-rated mechanical wedge-action grips and pre-loaded push/pull rods are used to hold samples within a conditioned environment.
Additionally, WaveMatrix™2 Dynamic Testing Software can automate the fatigue test with different stress levels on each step and integrated control of the temperature chamber. Data is saved as an ASCII based data file for analysis with industry-standard programs, such as Microsoft® Excel.
WaveMatrix can be expanded with the optional Calculations Module that allows real-time calculation of different material properties including:
- Dynamic Mechanical Analysis (DMA): Dynamic Stiffness (K*) or Dynamic Modulus (E*)
- Elastic Stiffness
- Energy: Total Energy or Residual Cycle Energy
- 21.7 MB
The ElectroPuls® E1000 is a state-of-the-art, all-electric test instrument designed for dynamicand static testing on a wide range of materials and components. It includes Instron® advanceddigital control electronics, DynacellTM load cell, Console software, and the very latest in testingtechnology – hassle-free tuning based on specimen stiffness, electrically operated crossheadlifts, a T-slot table for flexible test set ups, and a host of other user-orientated features. Poweredfrom a single-phase supply it requires no additional utilities for basic machine operation (forexample, pneumatic air, hydraulics, or water).
- 383.1 KB