งานเขียน
ห้องสมุดงานเขียนสำหรับแผ่นพับ, คู่มือ, สมุดปกขาว & กรณีศึกษา
Industrial Series DX Models
Designed for high-capacity tensile, compression, bend/flex, and shear testing, DX Series testing systems feature a dual test space and single footprint. Understanding the critical importance of operator safety, these frames incorporate high-quality materials, components, and craftsmanship and are ideal for testing metals, wire rod, fasteners, concrete, and wood.
ผลิตภัณฑ์ 08/29/2022 1.03 MB
2501 Series Compression Platens
These easy-to-install compression platens are precisely machined fixtures that are designed for even distribution of compression loads during a test.
ผลิตภัณฑ์ 07/07/2022 403.08 KB
โบรชัวร์ระบบทดสอบอเนกประสงค์ ซีรีส์ 3400
ระบบทดสอบวัสดุอเนกประสงค์ Instron ซีรีส์ 3400 สำหรับการทดสอบแรงดึง แรงอัด การดัด และการทดสอบคุณสมบัติอื่นๆ ของวัสดุ
ผลิตภัณฑ์ 06/27/2022 2.58 MB
Noise detection system
A typical passive vehicle damper is a compromise between handling properties of a car, passenger comfort and safety as well as NVH (Noise, Vibration, and Harshness). The dominant source of noise in today’s vehicles is from the suspension. This knocking noise (a transient of structural noise) is a result of the subtle vibration of chassis components. It occurs due to the vibrations of the piston rod in the shock absorber, making it a key element of a vehicle suspension system. The piston rod vibrations are caused by the continuous opening and closing motion of the valve, valve impacts, dry friction during stroking inversions and fluid cavitation. The purpose of our system (intended to measure the level of piston rod noise as a quality check of shock absorber in a production line) is ultimately to enhance overall vehicle performance, comfort and to facilitate a seamless transportation
ผลิตภัณฑ์ 06/22/2022 356.43 KB
2810 Series Mini Flexure Fixtures
This bend fixture is constructed from stainless steel and features a micrometer to adjust the location of the crack front and adjustable specimen stops for repeatable specimen alignment.
ผลิตภัณฑ์ 05/09/2022 564.47 KB
100 kN Flexure Fixture Data Sheet
The flexure fixture (catalog no. 2810-182) allows a variety of flexural and fracture toughness bond tests to be performed, including determination of flexural modulus, flexural strength and flexural yield strength.
ผลิตภัณฑ์ 05/09/2022 528.04 KB
2580 Series Static Load Cells Data Sheet
The 2580 Series load cells are specifically designed for use with 6800 and 5900 testing systems; offering exceptional performance with the ability to measure forces as low as 1/1000th of the force capacity to an accuracy of 0.5% of reading.
ผลิตภัณฑ์ 05/09/2022 641.71 KB
2712-04x Series Pneumatic Side Action Grips Data Sheet
Instron’s 2712‑04x Series pneumatic grips deliver reliable, self‑centering gripping for a wide range of materials with options from 1 to 10 kN. Designed for safety and efficiency, they feature tool‑free jaw face changes, adjustable air‑controlled gripping force, robust enclosed mechanisms, and ergonomic components that improve alignment, usability, and operator protection.
ผลิตภัณฑ์ 03/22/2022 1.13 MB
2712-05x Series Pneumatic Side Action Grips Data Sheet (50 N and 250 N)
The Instron 2712-05x Series Pneumatic Side-Action Grips offers a versatile gripping solution for a wide range of materials. Available in both 50 and 250 N options, the grip’s robust design is ideal for round (wires),fiber (mono-filaments), and flat specimens with or without shoulder.
ผลิตภัณฑ์ 03/22/2022 1.86 MB
Curved Needle Testing Systems
The Instron® Needle Testing System is ideally suited for needles used in abdominal, fistula, vascular, intestinal, or other surgical procedures. This system provides two different needle testing solutions: one for curved needle puncture testing and one for bend testing. The curved needle puncture testing fixture is used to evaluate needle sharpness and insertion force, while the needle bend testing fixture is used to evaluate flexural properties of the needle during use. With its tabletop design, the Curved Needle Testing System has a small footprint and takes up minimal benchtop space. The testing system operates with Instron Bluehill® 3 Software that provides test control, data acquisition,test results, and reports, as well as a large library of calculations.
ผลิตภัณฑ์ 03/18/2022 493.73 KB