งานเขียน
ห้องสมุดงานเขียนสำหรับแผ่นพับ, คู่มือ, สมุดปกขาว & กรณีศึกษา
50 kN Universal Hydraulic Wedge Action Grips Data Sheet
The 50 kN universal hydraulic wedge action grips are designed for use in static materials testing applications. The interchangeable grip jaw faces accommodate both flat or round specimens. The grip design maintains a constant gripping force on the test specimen, regardless of the applied test forces. This controlled gripping force is applied by the grips as long as there is adequate hydraulic pressure supply that is active and connected.
ผลิตภัณฑ์ 03/12/2025 468.09 KB
Bluehill 3 Advanced Test Method Development Course Overview
In this one-day course, students will work with a certified Instron training instructor to explore advanced tools and features of Bluehill 3. Using a handson approach, the instructor will guide students through a series of projects designed to foster an understanding of advanced Test Method development and administrative controls
ผลิตภัณฑ์ 03/12/2025 131.02 KB
ElectroPuls | E20000 Linear-Torsion All-Electric Dynamic Test Instrument
The Instron® E20000 is the latest addition to the ElectroPuls family, with 20 kN linear capacity and 130 Nm torque capacity. The all-electric test instrument has twice the linear capacity of the popular E10000 system but in virtually the same size package. The all-new, patent pending, automatic electric crosshead clamps make adjusting the test space size easier and faster. As with the existing range it includes Instron’s advanced digital control electronics, bi-axial Dynacell™ load cell and patented hassle-free tuning based on specimen stiffness.
ผลิตภัณฑ์ 03/12/2025 1.04 MB
Model 34FM-100 Dual Column Floor Model Preinstallation Manual
The Preinstallation Manual details the system’s site and power requirements, dimensional drawings, lifting and handling instructions, installation procedure, and preventative maintenance details.
ผลิตภัณฑ์ 03/12/2025 3.01 MB
4400 5500 5800 Product Life Cycle Support Notice | Phase 4
Instron announces the transition of its 4400, 5500, 5500A, and 5800 Series testing systems to Phase 4 – Discontinued Product. This Product Life Cycle Support Notice helps customers plan upgrades, understand service changes, and prepare for the long‑term evolution of their materials testing equipment.
ผลิตภัณฑ์ 03/12/2025 331.71 KB
ElectroPuls | E20000 All-Electric Dynamic Test Instrument
The Instron® E20000 is the latest addition to the ElectroPuls family, with 20 kN linear capacity. The all-electric test instrument has twice the linear capacity of the popular E10000 system but in virtually the same size package. The all-new, patent pending, automatic electric crosshead clamps make adjusting the test space size easier and faster. As with the existing range it includes Instron’s advanced digital control electronics, Dynacell™ load cell and patented hassle-free tuning based on specimen stiffness.
ผลิตภัณฑ์ 03/12/2025 766.58 KB
Introduction to Materials Testing Course Overview
In this one-day course, students will learn about materials testing. The course highlights the basics of materials testing including mechanical properties, different types of testing, stress/strain test curves, modulus, yield, and application testing with demonstrations on computerized materials test instruments. Students will observe tensile, compressive, flexural, and peel tests to learn to interpret test curves and calculated results.
ผลิตภัณฑ์ 03/12/2025 139.38 KB
Impact Drop Tower – Three-Point Bending
The mechanical properties of plastic materials are sensitive to loading rate and the fracture toughness under dynamic loading has received considerable attention because it often concerns the failure of structural materials during their service life.
ผลิตภัณฑ์ 03/12/2025 364.7 KB
Environmental Chambers 3119-400 Series in Phase 4 | Product Live Cycle Support Notice
This letter is an official Product Life Cycle notification informing you that the following Instron Environmental Chambers have entered Phase 4: Discontinued Product of the Instron Product Life Cycle: 3119-405, 3119-406, 3119-407, 3119-408, 3119- 409, 3119-410 and any custom variants featuring a Eurotherm 2408 temperature controller and handset.
ผลิตภัณฑ์ 03/12/2025 326.71 KB
MFi5
The MFi5 is a compact instrument that allows rapid inspection of the melt mass flow rate of plastics. It is especially designed for different needs, from simple Incoming Material Acceptance to Process Control checks. The manually operated MFi5 tests plastics quickly and reliably thanks to the pre-set methods.
ผลิตภัณฑ์ 03/12/2025 124.23 KB