Machine de Traction HDX
Conçue pour les essais forte capacité de traction, compression, pliage/flexion, et de cisaillement, la machine de traction HDX est alimentée par une pompe hydraulique qui déplace le piston chargé de délivrer les forces nécessaires à l'essai.
- Machine de traction polyvalente comprenant deux espaces d'essai, permettant à l'utilisateur de passer rapidement d'un essai de traction à un essai de compression sans manipuler de lourdes fixations.
- Colonnes de guidage à encoche permettant le reposionnement de la traverse supérieure.
- Traverse ouverte en face avant en option pour faciliter la mise en place des éprouvettes et accroitre la productivité et la sécurité.
- Le capteur de force à jauge de contrainte mesure directement la force appliquée sur chaque éprouvette.
- Le marche pied permet à l'utilisateur de bien se placer face au panneau de commande et au système de pilotage de l'hydraulique.
- L'électronique de commande avancée permet la reconnaissance et l'étalonnage automatiques des capteurs. On s'assure ainsi d'utiliser les montages adaptés et d'obtenir des résultats d'essai fiables.
- Logiciel compatible Windows® permettant facilité d'utilisation et flexibilité.
- Le groupe hydraulique à pression variable délivre la pression voulue à la demande, réduisant la montée en température et la consommation d'énergie durant l'utilisation.
- 1000HDX - 1000 kN (220,000 lbf)
High Force Universal Testing Machines Brochure
Instron’s high force systems include electromechanical and high-capacity hydraulic testing systems for tension and compression applications. Force capacities range from 100 kN to 2000kN.
- Produits
- 08/10/2020
- 3.57 MB
Industrial Series HDX Models
Featuring a dual test space and long test stroke HDX Models are designed for high-capacity tension, compression, bend/flex, and shear testing.
- Produits
- 10/07/2013
- 210.4 KB
Bluehill Universal Brochure
Bluehill Universal is Instron’s advanced materials testing software, designed for intuitive touch interaction and streamlined workflows. It offers pre-loaded test methods, QuickTest for rapid setup, enhanced data exporting, and Instron Connect for direct service communication. Users of Bluehill 2 and Bluehill 3 can easily upgrade to the latest version for improved performance and usability
- Produits
- 02/26/2017
- 3.77 MB
HDX Static Hydraulic Universal Testing System – Pre-Installation Manual
The information in this document is intended to aid customers in the site preparation, unpacking, lifting, and installation of the Instron Model HDX Static Hydraulic Universal Testing Systems. These instructions assume the following: • Your system consists of a frame, a hydraulic power supply, a control unit, a computer system with an Instron materials testing software package, and any testing accessories necessary to secure the specimen in the test space. It is important that the site be adequately prepared in order to avoid unnecessary delays in the installation process and to ensure that the testing system operates without interference from various environmental conditions (i.e. excess building vibrations or extreme temperature and humidity levels).
- Manuel
- 07/20/2020
- 1 MB
HDX Static Hydraulic Universal Testing System – Operating Instructions
These instructions describe the function, operation and maintenance for various models of the HDX testing systems. If unsure of your specific model, refer to “System identification” on page 14. These instructions assume the following: • You are an operator familiar with the operation of materials testing systems in general. • Your system has been installed in its final location according to the requirements outlined in the system’s Pre-Installation Manual. • Your system consists of a frame, a hydraulic power supply, a control unit, a computer system with an Instron materials testing software package, and any testing accessories necessary to secure the specimen in the test space. • Software test methods that are appropriate for your testing requirements are available. These instructions do not include the development of test methods within the materials testing software. This is covered in more advanced training that can be provided by Instron Service and Training departments.
- Manuel
- 07/20/2020
- 1.95 MB
HDX Static Hydraulic Universal Testing System – System Concepts Manual
These instructions provide additional information beyond what is necessary to operate the various models of the HDX testing systems. These instructions are intended for a laboratory or facilities supervisor, or Instron service personnel. These instructions assume the following: • You are an operator familiar with the operation of materials testing systems in general. • Your system has been installed in its final location according to the requirements outlined in the system’s Pre-Installation Manual. • Your system consists of a frame, a hydraulic power supply, a control unit, a computer system with an Instron materials testing software package, and any testing accessories necessary to secure the specimen in the test space. • Software test methods that are appropriate for your testing requirements are available. These instructions do not include the development of test methods within the materials testing software. This is covered in more advanced training that can be provided by Instron Service and Training departments.
- Manuel
- 07/21/2020
- 1.75 MB
HDX Static Hydraulic Universal Testing System – Reference Manual
This Equipment Reference Manual has been prepared to provide customers with assembly drawings and schematics that pertain to the various models of HDX Static Hydraulic Universal Testing Systems.
- Manuel
- 07/21/2020
- 1.57 MB
