ASTM D885 Tire Cord Tensile Test
This standard details the testing of fibers and cords made specifically for use in the manufacture of pneumatic tires. This standard may be applied to similar yarns and cords used for reinforcing other rubber goods and for other industrial applications. The result of this test is a determination of tensile strength of the cord being tested.
Gripping of the specimens can prove a challenge, as the cords tested with this standard are designed to be very high strength. Instron’s 2714-010 pneumatic cord and yarn grips are designed specifically for this application, and will allow specimens to be tested without slippage.
The challenges of testing to this standard are:
- Specimen gripping
Instron's Solution:
- Instron pneumatic tire cord grips are designed specifically for testing high strength tire cord, and are able to grip securely while maintaining high throughput
It is important to review ASTM D885-07 to fully understand the test setup, procedure, and results requirements.
Pneumatic Tire Cord Grips (CP105953)
The Instron® pneumatic tire cord grips provide a convenient method for clamping tire cord and braided wire during testing.
- Produtos
- 8/14/2013
- 0.6 MB
6800 Series Universal Testing Systems
Instron 6800 Series Universal Testing Systems provide unparalleled accuracy and reliability. Built on a patent-pending Operator Protect system architecture with an all-new Smart-Close Air Kit and Collision Mitigation features, the 6800 Series makes materials testing simpler, smarter, and safer than ever before.
- Produtos
- 2/10/2020
- 3.6 MB
Série 3400 | Sistemas de Ensaios Universais
As máquinas de ensaios universais da série 3400 foram projetadas para realizar ensaios de tração, compressão, flexão, adesão (peel), perfuração, COF, cisalhamento e muito mais.
- Produtos
- 4/23/2021
- 2.8 MB
Catálogo do Software de Ensaios Bluehill Universal
Catálogo do Bluehill Universal em PT-BR
- Produtos
- 1/12/2018
- 2.6 MB