Fatigue Rated Mechanical Wedge Grips (+/- 100 kN)
2743-402 | ±100 kN (22 kip) Fatigue Rated Mechanical Wedge Grips
- Offers fatigue testing capability at the lowest possible cost
- Grip closure is performed manually using a torque wrench (note requires a minimum grip separation)
- Feature side-entry design with full access for easy specimen insertion from the side
- Adjustable specimen stops on flat faces provide accurate specimen centering
- Suitable for tension and compression including full reverse-stress dynamic testing capability
- Temperature Range: -70 to +350 deg C
- Mechanical interface: M30 x 2 right hand female threads
- Grip mass: 26 kg (57lbs) approximately per grip
- Static Load Capacity ±130kN (29 kip)
Requires: grip faces and fatigue rated adapters
Quantity: 2 grips
Accessory Height | 170 mm (6.89 in) |
---|---|
Accessory Weight | 26 kg (57.2 lb) |
Accessory Width | 172 mm (6.77 in) |
Capacity | +/- 100 kN (+/- 22,000 lbf) |
Lower Fitting | M30 RH (Type If) |
Static or Fatigue Rated | Fatigue |
Temperature Rating | -70 to +350°C (- 94 to + 662°F) |
Upper Effective Length | 170 mm (6.8 in) |
Upper Fitting | M30 RH (Type If) |
- Jaw Faces for Flats (Serrated, 0 - 7.8 mm)
- Jaw Faces for Flats (Serrated, 7.1 - 15.7 mm)
- Jaw Faces for Flats (Carbide coated, 0 - 7.8 mm)
- Jaw Faces for Flats (Carbide coated, 7.1 - 15.7 mm)
- Jaw Faces for Rounds (Vee-serrated, 6.1 - 11.9 mm)
- Jaw Faces for Rounds (Vee-Serrated, 9.9 - 16.0 mm)