ISO

ISO

ISO standards that are referenced in this section are not intended to be a complete and comprehensive list, but a list of the most prominent and widely-used ISO standards within the materials testing industry. For solutions that are not mentioned within this section, please contact your local Instron office.

ISO Standards

ASTM A370, ISO 6892-1, ISO 3183 and API5L: Tensile Testing of Pipe and Tube
ASTM A370, ISO 6892-1, ISO 3183 and API5L: Tensile Testing of Pipe and Tube
ASTM A938 / ISO 7800 Torsion Testing of Wire
ASTM A938 / ISO 7800 Torsion Testing of Wire
ISO 101132006
ISO 101132006
ISO 10310 Non-Contact extensometry for Geosynthetics
ISO 10310 Non-Contact extensometry for Geosynthetics
ISO 10555 Tensile Testing of Intravascular Catheters
ISO 10555 Tensile Testing of Intravascular Catheters
ISO 11040
ISO 11040
ISO 11193
ISO 11193
ISO 1133 Melt Mass-Flow Rate and Melt Volume-Flow Rate Thermoplastics
ISO 1133 Melt Mass-Flow Rate and Melt Volume-Flow Rate Thermoplastics
ISO 1133-2 and ASTM D1238: when Load Cell ensures Repeatability of Results.
ISO 1133-2 and ASTM D1238: when Load Cell ensures Repeatability of Results.
ISO 11339
ISO 11339
ISO 11343 Determination of Adhesive Bond Strength Under Impact (wedge-peel test)
ISO 11343 Determination of Adhesive Bond Strength Under Impact (wedge-peel test)
ISO 11443 – Rheology of Heat-Curing Elastomers/Silicone at Room Temperature
ISO 11443 – Rheology of Heat-Curing Elastomers/Silicone at Room Temperature
ISO 11443 – Rheology of low viscosity fluid for spray application
ISO 11443 – Rheology of low viscosity fluid for spray application
ISO 11443 and ASTM D3835 tests to study Polymer Degradation
ISO 11443 and ASTM D3835 tests to study Polymer Degradation
ISO 11443 Extrudate Swelling
ISO 11443 Extrudate Swelling
ISO 11443 Fluidity of Plastics Using Capillary and Slit Die Rheometers
ISO 11443 Fluidity of Plastics Using Capillary and Slit Die Rheometers
ISO 11443 Research, Design and Quality Assurance for Injection Moulding
ISO 11443 Research, Design and Quality Assurance for Injection Moulding
ISO 11443, ASTM D3835 Determination of Properties of Polymeric Materials with a Capillary Rheometer
ISO 11443, ASTM D3835 Determination of Properties of Polymeric Materials with a Capillary Rheometer
ISO 11608 Testing Needle-Based Injection Systems
ISO 11608 Testing Needle-Based Injection Systems
ISO 11897 Thermoplastic Flexible Film Packaging, Tear Propagation Edge Folds
ISO 11897 Thermoplastic Flexible Film Packaging, Tear Propagation Edge Folds
ISO 12111 & ASTM E2368
ISO 12111 & ASTM E2368
ISO 13001 and ASTM D3479 Improving Throughput in Composites Fatigue Tests
ISO 13001 and ASTM D3479 Improving Throughput in Composites Fatigue Tests
ISO 13934-1
ISO 13934-1
ISO 13937-2 Tear Properties of Fabrics
ISO 13937-2 Tear Properties of Fabrics
ISO 13937-3 Tear Properties of Fabrics
ISO 13937-3 Tear Properties of Fabrics
ISO 13937-4 Tear Properties of Fabrics – Tongue Shaped Specimens
ISO 13937-4 Tear Properties of Fabrics – Tongue Shaped Specimens
ISO 14125 Flexural Properties of Fiber-Reinforced Plastic Composites
ISO 14125 Flexural Properties of Fiber-Reinforced Plastic Composites
ISO 14126 In-Plane Compressive Properties of Fiber-Reinforced Plastic Composites
ISO 14126 In-Plane Compressive Properties of Fiber-Reinforced Plastic Composites
ISO 14129 In-Plane Shear Stress/Shear Strain Response
ISO 14129 In-Plane Shear Stress/Shear Strain Response
ISO 14130 Determination of Apparent Interlaminar Shear Strength by Short-Beam Method
ISO 14130 Determination of Apparent Interlaminar Shear Strength by Short-Beam Method
ISO 1421:1998 Determination of Tensile Strength and Elongation at Break
ISO 1421:1998 Determination of Tensile Strength and Elongation at Break
ISO 14801
ISO 14801
ISO 14879
ISO 14879
Iso 15630 1
Iso 15630 1
ISO 16402 Flexural Testing of Acrylic Resin Cements Used in Orthopaedics
ISO 16402 Flexural Testing of Acrylic Resin Cements Used in Orthopaedics
ISO 17744 Determination of specific volume as a function of temperature and pressure (pvT diagram)
ISO 17744 Determination of specific volume as a function of temperature and pressure (pvT diagram)
ISO 179-2 Determination of Charpy Impact Properties – Instrumented
ISO 179-2 Determination of Charpy Impact Properties – Instrumented
ISO 1798 Tensile Strength Flexible Cellular Polymeric Materials
ISO 1798 Tensile Strength Flexible Cellular Polymeric Materials
ISO 180 Determination of Izod Impact Strength
ISO 180 Determination of Izod Impact Strength
ISO 18489
ISO 18489
ISO 1926 Rigid Cellular Plastics Tensile Properties
ISO 1926 Rigid Cellular Plastics Tensile Properties
ISO 2062 Single-end Breaking Force and Elongation at Break of Yarns from Packages
ISO 2062 Single-end Breaking Force and Elongation at Break of Yarns from Packages
ISO 20795-1 and 20795-2 Flexure Test of Base Polymers
ISO 20795-1 and 20795-2 Flexure Test of Base Polymers
ISO 2411 Coating Adhesion Rubber-Coated Plastics-Coated Fabrics
ISO 2411 Coating Adhesion Rubber-Coated Plastics-Coated Fabrics
ISO 306 Determination of Vicat Softening Temperature (VST)
ISO 306 Determination of Vicat Softening Temperature (VST)
ISO 3133, ISO 3349, & ASTM D143
ISO 3133, ISO 3349, & ASTM D143
ISO 3183 Fastener Double Shear Testing
ISO 3183 Fastener Double Shear Testing
ISO 34-1
ISO 34-1
ISO 36
ISO 36
ISO 37
ISO 37
ISO 4587
ISO 4587
ISO 527-2
ISO 527-2
ISO 527-3
ISO 527-3
ISO 527-4
ISO 527-4
ISO 604: Compressive Properties of Plastics
ISO 604: Compressive Properties of Plastics
ISO 6383-1 Tear Resistance Plastic Film and Sheeting
ISO 6383-1 Tear Resistance Plastic Film and Sheeting
ISO 6603 – ASTM D3763: Quick impact at low temperature
ISO 6603 – ASTM D3763: Quick impact at low temperature
ISO 6603-2 Impact Resistance of Composite Materials – Nautical Applications
ISO 6603-2 Impact Resistance of Composite Materials – Nautical Applications
ISO 6603-2 Puncture Impact Behavior of Rigid Plastics
ISO 6603-2 Puncture Impact Behavior of Rigid Plastics
ISO 6872 Flexural Strength Testing of Dental Ceramics
ISO 6872 Flexural Strength Testing of Dental Ceramics
ISO 6892-2
ISO 6892-2
ISO 6892: Tensile Testing of Metallic Materials
ISO 6892: Tensile Testing of Metallic Materials
ISO 7206-4, 7206-6 and 7206-8
ISO 7206-4, 7206-6 and 7206-8
ISO 75 and ISO 306: HDT and VST Tests on High Temperature Polymers
ISO 75 and ISO 306: HDT and VST Tests on High Temperature Polymers
ISO 7886-1: Testing Sterile Hypodermic Syringes
ISO 7886-1: Testing Sterile Hypodermic Syringes
ISO 80369 Small-Bore Connectors for Liquids and Gases in Healthcare Applications
ISO 80369 Small-Bore Connectors for Liquids and Gases in Healthcare Applications
ISO 8067 Flexible Cellular Polymeric Materials Tear Strength
ISO 8067 Flexible Cellular Polymeric Materials Tear Strength
ISO 813 Adhesion Strength of Rubber to Rigid Substrates
ISO 813 Adhesion Strength of Rubber to Rigid Substrates
ISO 8256 Tensile Impact Tests on Playing Cards (PVC)
ISO 8256 Tensile Impact Tests on Playing Cards (PVC)
ISO 8295 Coefficient of Friction Plastic Film and Sheeting
ISO 8295 Coefficient of Friction Plastic Film and Sheeting
ISO 844 Rigid Cellular Plastics Compression Properties
ISO 844 Rigid Cellular Plastics Compression Properties
ISO 898-1
ISO 898-1
ISO 9073-4 Tear Resistance Nonwovens
ISO 9073-4 Tear Resistance Nonwovens
ISO/TS 11405 Tensile Adhesion and Bond Strength of Dental Materials and Adhesives
ISO/TS 11405 Tensile Adhesion and Bond Strength of Dental Materials and Adhesives
Tensile Strain Hardening Exponent (n)
Tensile Strain Hardening Exponent (n)
Tensile Strength of Basalt Fiber Reinforced Plastic (BFRP) Rebar
Tensile Strength of Basalt Fiber Reinforced Plastic (BFRP) Rebar
The Definitive Guide to ISO 178
The Definitive Guide to ISO 178
No Result Found
Contact Us
OthersASTM Standards