SELF-TIGHTENING ECCENTRIC ROLLER TENSILE GRIPS
For Tensile Testing Thin Sheets, Films, Flexible Plastics, Rubber, and Elastomers
The self-tightening grips are primarily designed for the precision testing of elastomeric and other flexible materials exhibiting a large reduction in cross-section area under load. They provide excellent testing accuracy, positive non-slip gripping action and are quick and simple to use. The upper grip is counter balanced so that the specimen can be aligned with the load cell to eliminate non-axial forces.
AVAILABLE MODELS
1 kN - 5 kN Force Capacities
1-kN-Modell | 2713-007
2-kN-Modell | 2713-004
5-kN-Modell | 2713-002
Principle of Operation
The self tightening grip uses an eccentric roller type clamping action. A single fast action lever reduces the time required to load specimens. Specimen insertion is extremely easy and the spring pressures of the roller bracket gives a positive non-slip action gripping force. This is sufficient to hold the material until a load is applied. The follow up action of the roller while under test prevents the specimen from slipping out of the grip as the load increases.
Specimen Loading: 1 kN Grips
Specimen Loading: 2 kN Grips
Application Range
- Type of loading: tensile, static, and tension cyclic tests - not suitable for high cycle dynamic fatigue tests
- Specimen materials: thin sheets, films, flexible plastic and elastomers
- Specimen shapes: flat specimen with or without shoulder tab ends
| Specifications | |||
|---|---|---|---|
| Catalog no. | 2713-007 | 2713-004 | 2713-002 |
| Force Capacity | 1 kN | 2 kN | 5 kN |
| Maximum Specimen Width | 43 mm | 28 mm | 28 mm |
| Temperature Range | -70 °C to 150 °C | -70 °C to 315 °C | -70 °C to 315 °C |
| View Full Specifications | Download Brochure | Download Brochure | Download Brochure |
KEY FEATURES
Self-Tightening Eccentric Roller Grips
Quick Loading
Fast action for rapid specimen insertion to increase testing throughput.
Non-Slip Grip
Positive, non-slip gripping action for accurate results.
Eccentric Roller
Eccentric roller type clamping action increases clamping force with applied force.
Ambient and Non-Ambient Testing
Designed for use in -70° C to 315° C (-94° F to 600° F) temperature ranges.
OTHER MODELS
Low-Force Grips
Thin Film Grips
2713-006 Series | 100 N Force Capacity
These grips are ideal for tensile testing natural rubber latex, elastomers, paper, and polymer films.
