Documentazione istituzionale
Documentazione istituzionale per cataloghi, manuali, relazioni, casi studio
Instron Stiffness Based Tuning
Instron’s Stiffness Based Tuning is used to quickly optimize the performance of your fatigue testing system, with no expertise required and no pre-cycling on the specimen.
Prodotti 07/01/2019 710.49 KB
VHS High Strain Rate System POD
The Instron VHS is designed to perform tests from quasi-static to high strain rates of up to 1000/s, offering an integrated solution for a wide range of high strain rate testing requirements.
Prodotti 06/13/2019 1.55 MB
ElectroPuls
With more than ten years of running tests over billions of cycles, ElectroPuls systems are the established materials testing machines using patented linear motor technology. With model capacities up to 20 kN, ElectroPuls systems offer slow-speed static testing and high-frequency dynamic fatigue testing with hundreds of hertz capability. The Linear-Torsion models feature a patented actuator for bi-axial tests on materials and components.
Prodotti 06/05/2019 3.63 MB
High Capacity Servohydraulic Systems
Instron high capacity systems are servohydraulic fatigue testing systems that perform high force static and dynamic tests on specimens up to 5000 kN. These machines use the same software, electronics, and interfaces as all of our general hydraulic fatigue machines, which ensures continuity and consistent experience across machines in your laboratory.
Prodotti 05/29/2019 1.42 MB
Axial-Torsion Testing
Axial-torsion testing machines help characterize biaxial mechanical properties of materials, both in static and dynamic conditions, which helps in choosing the right materials for different applications where components are exposed to axial torsion loading profiles.
Prodotti 05/29/2019 600.63 KB
Thermomechanical Fatigue (TMF) Testing Systems
Instron Thermomechanical Fatigue testing systems provide a fully integrated, turnkey solution for analysis of combined thermal and mechanical loading cycles on high performance materials.
Prodotti 05/29/2019 646.62 KB
Electrothermal Mechanical Testing System (ETMT)
Instron Electro-Thermal Mechanical Testing System (ETMT) is a compact table-top testing system that is developed to perform accelerating high-temperature research. The system is capable of achieving fatigue loading rates up to 1000 N/s with heating and cooling rates of 200°C/s and 100°C/s respectively.
Prodotti 05/29/2019 1.59 MB
8850 Series Axial Torsion Systems
The Instron 8850 series system is a floor model biaxial servohydraulic dynamic test system that provides axial and torsional load on a specimen in an integrated biaxial actuator. With a precision aligned, high-stiffness twin-column frame, the 8850 series meets the challenging demands of a varied range of both static and dynamic biaxial testing requirements.
Prodotti 05/28/2019 776.7 KB
Capillary Rheometer Systems
The innovative Instron® line of CEAST SmartRHEO Series of Capillary Rheometer systems are designed for an accurate investigation of the rheological properties of polymeric materials.
Prodotti 05/24/2019 2.07 MB
Wedge Peel Impact Test Adhesives – ISO 11343
Ensure the performance and structural integrity of safety-critical adhesives with ISO 11343 Wedge Peel testing. Learn how to perform this standardized impact test using the Instron-CEAST 9350 Drop Tower across variable speeds and temperatures.
Applications 04/19/2019 169.2 KB