Documentazione istituzionale
Documentazione istituzionale per cataloghi, manuali, relazioni, casi studio
300 kN Wedge Action Grips Data Sheet
Instron’s 300 kN manual wedge grips (catalog no. CP130950) are designed to provide a high-capacity gripping solution without the need for pneumatic or hydraulic actuation.
Prodotti 03/12/2025 469.06 KB
Comparison of Standard Security vs. Local Traceability vs. Traceability in Bluehill Central
A features table comparing the standard Security in Bluehill Universal against the local Traceability module and Traceability in Bluehill Central.
Prodotti 03/12/2025 162.26 KB
Calibration After Software Changes–Universal Materials Testing Machines
To ensure that your testing instrument is providing accurate data, we always recommend calibration of all transducers upon installation of the equipment on site (for a screw-driven machine, this would include force, speed and displacement of crosshead and strain if extensometers are used), and then recalibrations on a regular schedule thereafter.
Prodotti 03/12/2025 194.21 KB
Certificate of Conformance – Bluehill Universal Calculation Test Suite
The Bluehill Universal Standard Calculation Test Suite compares results from the software under test with expected results using known data sets as input. The expected results are determined using a variety of independent methods including MathCad, Excel, hand calculation and visual inspection.
Prodotti 03/12/2025 242.35 KB
Opuscolo sui test dei materiali compositi
Le macchine di prova universali di Instron sono progettate per eseguire i tipi di test più comuni nel settore dei compositi tra cui, a titolo esemplificativo ma non esaustivo, la trazione sul piano, la trazione a spessore variabile, il taglio interlaminare, la compressione finale, il taglio o il carico combinato e la compressione post impatto.
Prodotti 03/12/2025 1.5 MB
AverEdge32 – Evaluating Measurement Techniques for Calculating the Plastic Strain Ratio (r-value) of Sheet Metal
This document purports to show the improvement in r-value results when using the averaged multi-point measurement compared to a single-point measurement.
Whitepapers 03/12/2025 1.06 MB
DEKRA certificate
Instron GmbH is accredited by DEKRA to conduct design examinations on Instron cylinders and accumulators.
Corporate, Quality 03/12/2025 161.44 KB
6800 Series Floor Model System Retrofits Data Sheet
6800 Series system retrofits allow older legacy Instron electromechanical floor model universal testing machines to be upgraded with the latest control electronics and testing software so you can enjoy the latest in testing technology.
Prodotti 03/12/2025 399.83 KB
6800 Series | Floor Model Universal Testing System Data Sheet
The 6800 Series universal testing machines are designed to perform tensile, compression, flex, peel, puncture, friction, shear tests, and more. These systems are compatible with hundreds of grips and fixtures found in Instron’s expansive accessories catalog, with specific configurations designed to perform many of the most popular ASTM and ISO tests.
Prodotti 03/12/2025 228.07 KB
MFi5 and MFi7 | Melt Flow Index Test Series
The MFi Series are compact instruments that allows rapid inspection of the melt mass flow rate of plastics. They are especially designed for different needs, from simple Incoming Material Acceptance to Process Control checks.
Prodotti 03/12/2025 250.05 KB