Product Manuals
AVE3 & SVE3 Video Extensometer Operator’s Guide
Learn how to use your AVE3 or SVE3 video extensometer system components and controls, set limits, perform calibration, and complete other common operating procedures.
Manuais 06/17/2026 3.16 MB
Manual de Pré-instalação do Modelo 68TM-100 de Mesa de Coluna Dupla
Este manual de pré-instalação abrange tudo o que é necessário para preparar sua instalação e transportar com segurança o sistema de ensaios de mesa de coluna dupla Modelo 68TM-100 antes da instalação — incluindo condições ambientais, dimensões e pesos do sistema, procedimentos de elevação e manuseio, e especificações de desempenho. Para conexão de componentes, configuração e operação, consulte o Guia do Operador.
Manuais 06/01/2026 1.31 MB
Manual de Pré-instalação do Modelo 34TM-100 de Mesa com Coluna Dupla
Este manual de pré-instalação abrange tudo o que é necessário para preparar suas instalações e transportar com segurança o sistema de ensaios de mesa com coluna dupla Modelo 34TM-100 antes da instalação — incluindo condições ambientais, dimensões e pesos do sistema, procedimentos de elevação e manuseio, e especificações de desempenho. Para conexão de componentes, configuração e operação, consulte o Guia do Operador.
Manuais 05/28/2026 1.26 MB
Specimen Marking Guide for Instron’s Video Extensometer
The AVE and SVE extensometers measure strain or extension by tracking markings applied to the specimen.
Manuais 05/27/2025 1.04 MB
Guia do operador do modelo de mesa de coluna única 3400
O Guia do Operador fornece as informações que o senhor precisa saber para começar a testar depois que o sistema tiver sido instalado e configurado pela primeira vez. O documento fornece uma introdução detalhada, notas sobre a preparação do sistema e informações sobre o teste de amostras.
Manuais 04/10/2025 4.83 MB
Torsion Add-On Version 3 Operator’s Guide
The Torsion Add-on system comprises a compatible electromechanical load frame, e.g. 6800 Series, a secondary motor mounted to the moving crosshead, a torsion controller assembly mounted to the column of the load frame and a suitable biaxial load cell mounted to the base adapter This configuration provides torque to the specimen which allows biaxial testing of specimens.
Manuais 02/14/2022 576.66 KB
6800 Dual Column Table Model Operator’s Guide
The Operators’ Guide provides the information you need to know to start testing after the system has been installed and set up for the first time. The document provides a detailed introduction, notes on prepping the system, and information on testing specimens.
Manuais 02/14/2022 2.43 MB
2713-002 Self Tightenting 5kN Rubber Grips – Operating and Installation Manual
This guide provides general instructions on how to use your component. This manual also includes specifications for the component as well as drawings.
Manuais 08/06/2020 366.06 KB
2701-065 Pneumatic Grip Control – Reference Manual
The 2701 Series Pneumatic Grip Control is a unit that operates pneumatic action grips.This guide provides instructions on how to use your component and other frequently performed operating tasks. This manual covers specifications, installation, operations and maintenance.
Manuais 08/06/2020 1.4 MB
2701-004 Pneumatic Footswitch – Operator’s Guide
The pneumatic foot switch is designed to provide sequential grip actuation, keeping the operator’s hands free to align the test specimen in the grips. This guide provides instructions on how to use your component and other frequently performed operating tasks. This manual covers specifications, installation, operations and maintenance.
Manuais 08/06/2020 188.44 KB
2820-035 and 2820-036 Peel Test Fixtures – Equipment Reference
Instron’s 90° Peel Test Fixture (Model 2820-035) and the Variable Angle Peel Test Fixture (Model 2820-036) are testing devices designed to measure the force required to peel a sample from its backing material or substrate. This guide provides instructions on how to use your components and other frequently performed operating tasks. This manual covers specifications, installation, operations and maintenance.
Manuais 08/06/2020 2.35 MB
2711-006 Miniature Grips for Low-Force Testing – Operator’s Guide
This guide provides instructions on how to use your components and other frequently performed operating tasks. This manual covers specifications, installation, operations, maintenance and illustrated parts.
Manuais 08/06/2020 779.95 KB
Model 2810-005 Coefficient of Friction Testing Fixture – Equipment Reference
This guide provides instructions on how to use your components and other frequently performed operating tasks. This manual covers specifications, installation, operations and illustrated parts.
Manuais 08/04/2020 1.08 MB
Series 2714 and 2734 Cord and Yarn Grips – Equipment Reference
This guide provides instructions on how to use your components and other frequently performed operating tasks. This manual covers installation and preparing for use, as well as maintenance and replaceable parts.
Manuais 08/04/2020 379.57 KB
2716-2736 – 100 and 150kN Wedge Grips – Operating Instructions
This guide provides instructions on how to use your components and other frequently performed operating tasks. This manual covers installation, operation and maintenance.
Manuais 08/04/2020 1.49 MB