Product Manuals
AVE3 & SVE3 Video Extensometer Operator’s Guide
Learn how to use your AVE3 or SVE3 video extensometer system components and controls, set limits, perform calibration, and complete other common operating procedures.
Manual 06/17/2026 3.16 MB
68TM-100 型雙立柱桌上型機架預安裝手冊
本預安裝手冊涵蓋在安裝前為您的設施做準備並安全運送 68TM-100 型雙立柱桌上型測試系統所需的一切內容，包括環境條件、系統尺寸與重量、吊裝與搬運程序，以及性能規格。關於元件連接、組態與操作，請參閱《操作員指南》。
Manual 06/01/2026 1.6 MB
34TM-100 型雙立柱桌上型機架預安裝手冊
本預安裝手冊涵蓋安裝前為準備您的設施並安全運輸 34TM-100 型雙立柱桌上型測試系統所需的一切內容，包括環境條件、系統尺寸與重量、吊裝與搬運程序，以及性能規格。關於元件連接、配置與操作，請參閱《操作指南》。
Manual 05/28/2026 1.55 MB
Specimen Marking Guide for Instron’s Video Extensometer
The AVE and SVE extensometers measure strain or extension by tracking markings applied to the specimen.
Manual 05/27/2025 1.04 MB
3400 Single Column Table Model Operator’s Guide
This Operators’ Guide provides the essential information you need to begin testing after initial system installation and setup by an Instron® service engineer. It is intended for experienced operators and covers a system that includes a load frame with integral controller, load cell, manual grips, and Bluehill® software. The guide includes an overview of system components, configuration, routine maintenance, and spare parts. It also provides instructions for checking system connections, installing grips, preloading the load string, and preparing specimens for testing.
Manual 04/10/2025 4.83 MB
Torsion Add-On Version 3 Operator’s Guide
The Torsion Add-on system comprises a compatible electromechanical load frame, e.g. 6800 Series, a secondary motor mounted to the moving crosshead, a torsion controller assembly mounted to the column of the load frame and a suitable biaxial load cell mounted to the base adapter This configuration provides torque to the specimen which allows biaxial testing of specimens.
Manual 02/14/2022 576.66 KB
6800 Dual Column Table Model Operator’s Guide
The Operators’ Guide provides the information you need to know to start testing after the system has been installed and set up for the first time. The document provides a detailed introduction, notes on prepping the system, and information on testing specimens.
Manual 02/14/2022 2.43 MB
2713-002 Self Tightenting 5kN Rubber Grips – Operating and Installation Manual
This guide provides general instructions on how to use your component. This manual also includes specifications for the component as well as drawings.
Manual 08/06/2020 366.06 KB
2701-065 Pneumatic Grip Control – Reference Manual
The 2701 Series Pneumatic Grip Control is a unit that operates pneumatic action grips.This guide provides instructions on how to use your component and other frequently performed operating tasks. This manual covers specifications, installation, operations and maintenance.
Manual 08/06/2020 1.4 MB
2701-004 Pneumatic Footswitch – Operator’s Guide
The pneumatic foot switch is designed to provide sequential grip actuation, keeping the operator’s hands free to align the test specimen in the grips. This guide provides instructions on how to use your component and other frequently performed operating tasks. This manual covers specifications, installation, operations and maintenance.
Manual 08/06/2020 188.44 KB
2820-035 and 2820-036 Peel Test Fixtures – Equipment Reference
Instron’s 90° Peel Test Fixture (Model 2820-035) and the Variable Angle Peel Test Fixture (Model 2820-036) are testing devices designed to measure the force required to peel a sample from its backing material or substrate. This guide provides instructions on how to use your components and other frequently performed operating tasks. This manual covers specifications, installation, operations and maintenance.
Manual 08/06/2020 2.35 MB
2711-006 Miniature Grips for Low-Force Testing – Operator’s Guide
This guide provides instructions on how to use your components and other frequently performed operating tasks. This manual covers specifications, installation, operations, maintenance and illustrated parts.
Manual 08/06/2020 779.95 KB
Model 2810-005 Coefficient of Friction Testing Fixture – Equipment Reference
This guide provides instructions on how to use your components and other frequently performed operating tasks. This manual covers specifications, installation, operations and illustrated parts.
Manual 08/04/2020 1.08 MB
Series 2714 and 2734 Cord and Yarn Grips – Equipment Reference
This guide provides instructions on how to use your components and other frequently performed operating tasks. This manual covers installation and preparing for use, as well as maintenance and replaceable parts.
Manual 08/04/2020 379.57 KB
2716-2736 – 100 and 150kN Wedge Grips – Operating Instructions
This guide provides instructions on how to use your components and other frequently performed operating tasks. This manual covers installation, operation and maintenance.
Manual 08/04/2020 1.49 MB