Bleiben Sie auf dem Laufenden über die neuesten Entwicklungen in der Materialprüfung, von praktischen Anleitungen und Anwendungseinblicken bis hin zu neuen Trends in Branchen wie Automobil, Luft- und Raumfahrt, Biomedizin und mehr. Egal, ob Sie Fehlerbehebung bei einer Prüfmethode betreiben, neue Standards erforschen oder einfach nur neugierig sind, was es Neues in der Prüftechnologie gibt – hier werden Sie fündig.
Nutzen Sie die Filter unten, um nach Thema oder Jahr zu suchen.
Oktober 28, 2013
Challenges with Steel
Challenges with Steel The continual drive for improved safety and increased fuel efficiency within the automotive industry hasn’t escaped anyone; the message is repeatedly broadcast via news outlets and advertised […]
Oktober 28, 2013
Question from a Customer: What tup do I use on my 1,800 J (1,330 ft-lb) drop tower?
Question from a Customer: What tup do I use on my 1,800 J (1,330 ft-lb) drop tower? As a starting point for this response, the 1,800 J is the impact […]
Oktober 17, 2013
Carbon Fiber Hits the Road
Carbon Fiber Hits the Road Leonardo Martinez The Drive for Lightweight Cars By 2016, the US car industry will need to average 34.5 mpg and by 2025, cars will need […]
Oktober 8, 2013
Poisson’s Ratio Testing With A Biaxial Extensometer
Poisson’s Ratio Testing With A Biaxial Extensometer Elayne (Schneebacher) Gordonov Poisson’s Ratio has proven to be a challenging calculation for obtaining both repeatable and accurate results. To improve repeatability, we […]
September 30, 2013
Simulating a Spring with the ElectroPuls
Simulating a Spring with the ElectroPuls Sarah Jastram As the number of patients seeking „in-home“ medical care grows larger, medical device companies find themselves catering to an increasing demand for […]
September 25, 2013
Upper Yield Calculations—Discontinuous Yielding/YPE Material
Upper Yield Calculations-Discontinuous Yielding/YPE Material David Fry Following a recent lab visit, I thought it was worth writing a quick post to share an example of how labs sometimes incorrectly […]
September 13, 2013
What Does Load Measurement Accuracy of 0.5% of Reading Down to 1/100th, 1/500th, 1/1000th of a Load Cell’s Capacity Imply?
What Does Load Measurement Accuracy of 0.5% of Reading Down to 1/100th, 1/500th, 1/1000th of a Load Cell’s Capacity Imply? Janice Tan First of all, there are two important pieces […]
August 15, 2013
Industry Insights Series with David Fry
Industry Insights Series with David Fry David Fry Working alongside our friends at AZOM, they developed a series of engaging interviews with a few of our global colleagues. In the […]
Juli 16, 2013
Equipment Considerations for a Well-aligned Test
Equipment Considerations for a Well-aligned Test Leonardo Martinez When testing stiff or brittle materials, such as composites, alignment is crucial-even instances of slight misalignment can throw off test results. Misalignment […]
Einblicke von den Instron-Experten.
Unser Team aus Anwendungsingenieuren, Prüfspezialisten und Branchenexperten teilt sein Wissen – von neuen Prüfstandards und Best Practices bis hin zu praktischen Tipps, realen Anwendungen und den neuesten Trends, die die Materialprüfung in allen Branchen prägen. Abonnieren Sie das Instron Update, um es direkt zu erhalten und keine Einblicke zu verpassen, die Ihrem Labor helfen können, die Nase vorn zu haben.