Literatur
Bibliothek mit Druckschriften, Handbüchern, Whitepapers & Fallstudien
100 kN Flexure Fixture Data Sheet
The flexure fixture (catalog no. 2810-182) allows a variety of flexural and fracture toughness bond tests to be performed, including determination of flexural modulus, flexural strength and flexural yield strength.
Produkte 05/09/2022 528.04 KB
2580 Series Static Load Cells Data Sheet
The 2580 Series load cells are specifically designed for use with 6800 and 5900 testing systems; offering exceptional performance with the ability to measure forces as low as 1/1000th of the force capacity to an accuracy of 0.5% of reading.
Produkte 05/09/2022 641.71 KB
FDA 21 CFR Part 11 Implementation – Bluehill Universal’s Traceability Module White Paper
The Traceability Module within Bluehill Universal can help meet the technical requirements of FDA 21 CFR Part 11. This document outlines the three key areas in Bluehill Universal (Security, Audit Trail, and Signatures) and also provides a row-by-row interpretation of how Bluehill Universal addresses each of the Part 11 items. Ultimately, each end user should perform their own assessment and create appropriate work instructions that cover the Instron system, Bluehill Universal, the Windows file systems, and the user’s Quality Management system.
Whitepapers 04/26/2022 299.76 KB
Datenblatt der pneumatischen Seitenspannbacken der Serie 2712-04x
Die pneumatischen Spannbacken der Instron Serie 2712‑04x bieten zuverlässiges, selbstzentrierendes Spannen für eine Vielzahl von Materialien mit Optionen von 1 bis 10 kN. Sie wurden für Sicherheit und Effizienz entwickelt und verfügen über werkzeuglose Backenwechsel, eine einstellbare luftgesteuerte Spannkraft, robuste gekapselte Mechanismen und ergonomische Komponenten, die die Ausrichtung, Benutzerfreundlichkeit und den Bedienerschutz verbessern.
Produkte 03/22/2022 1.13 MB
2712-05x Series Pneumatic Side Action Grips Data Sheet (50 N and 250 N)
The Instron 2712-05x Series Pneumatic Side-Action Grips offers a versatile gripping solution for a wide range of materials. Available in both 50 and 250 N options, the grip’s robust design is ideal for round (wires),fiber (mono-filaments), and flat specimens with or without shoulder.
Produkte 03/22/2022 1.86 MB
Curved Needle Testing Systems
The Instron® Needle Testing System is ideally suited for needles used in abdominal, fistula, vascular, intestinal, or other surgical procedures. This system provides two different needle testing solutions: one for curved needle puncture testing and one for bend testing. The curved needle puncture testing fixture is used to evaluate needle sharpness and insertion force, while the needle bend testing fixture is used to evaluate flexural properties of the needle during use. With its tabletop design, the Curved Needle Testing System has a small footprint and takes up minimal benchtop space. The testing system operates with Instron Bluehill® 3 Software that provides test control, data acquisition,test results, and reports, as well as a large library of calculations.
Produkte 03/18/2022 493.73 KB
Manual Wedge Action Grips 2716-00x and 2736-00x Series
The manual wedge action grip is designed for easy specimen loading, alignment, and positioning. After initial face to specimen contact, gripping force will increase as the testing load increases. Virtually no preload is seen during specimen clamping due to the design of the moving grip bodies. This makes them particularly suitable for testing high strength materials, such as metals and composites, ensuring that specimen slippage is eliminated.
Produkte 03/08/2022 1.06 MB
6800 Series Multi Station Systems
The Instron 6800 Series Multi Station System offers enhanced throughput with its ability to perform simultaneous, independent tests on up to five separate specimens using a single load frame.
Produkte 02/18/2022 790.79 KB
6800 Serie – Zweisäulen-Tischmodell – Bedienerhandbuch
Das Benutzerhandbuch enthält die Informationen, die Sie benötigen, um mit den Tests zu beginnen, nachdem das System installiert und zum ersten Mal eingerichtet worden ist. Das Dokument enthält eine ausführliche Einführung, Hinweise zur Vorbereitung des Systems und Informationen zur Prüfung von Proben.
Handbücher 02/14/2022 2.5 MB
Torsion Add-On Version 3 Operator’s Guide
The Torsion Add-on system comprises a compatible electromechanical load frame, e.g. 6800 Series, a secondary motor mounted to the moving crosshead, a torsion controller assembly mounted to the column of the load frame and a suitable biaxial load cell mounted to the base adapter This configuration provides torque to the specimen which allows biaxial testing of specimens.
Handbücher 02/14/2022 576.66 KB