Manténgase al día con lo último en ensayos de materiales, desde guías prácticas y conocimientos sobre aplicaciones hasta las tendencias emergentes en sectores como el de la automoción, el aeroespacial, el biomédico y muchos más. Tanto si está resolviendo problemas de un método de ensayo, explorando nuevas normas o simplemente tiene curiosidad por el futuro de la tecnología de ensayos, lo encontrará aquí.
Utilice los siguientes filtros para navegar por tema o año.
febrero 25, 2014
Software Module Increases Test Frequency for Fatigue Testing of Composites and Polymers
Software Module Increases Test Frequency for Fatigue Testing of Composites and Polymers Senior Applications Specialist for Dynamic Systems, Peter Bailey shares with AZoM how the Specimen Self-Heating Control (SSHC) module […]
enero 31, 2014
What is The Difference Between Proportional and Non-proportional Clamping Force?
What is The Difference Between Proportional and Non-proportional Clamping Force? David Fry While there are many varieties of gripping technologies (wedge, screw, hydraulic, pneumatic, etc.), they all can be classified […]
enero 16, 2014
What is the Best Way to Check the Functionality of my ElectroPuls™ Load Cell?
What is the Best Way to Check the Functionality of my ElectroPuls™ Load Cell? Sarah Jastram Instron load cells are robust and built to last. Therefore, checking the load cell’s […]
enero 8, 2014
What is N-value?
What is N-value? In one of our previous posts, we blogged about plastic strain ratio, r. Besides r-value, another parameter that is commonly measured in metals testing is the n-value. So […]
diciembre 26, 2013
Testing Metals to ASTM E8 with an Automatic Contacting Extensometer
Testing Metals to ASTM E8 with an Automatic Contacting Extensometer The ASTM E8 standard describes tensile testing methods to determine yield strength, yield point elongation, tensile strength, elongation, and reduction […]
diciembre 12, 2013
Energy-Controlled Impulse Testing of Shoes
Energy-Controlled Impulse Testing of Shoes Sarah Jastram Shoe and shoe material manufacturers alike must be able to prove that their products will withstand a substantial amount of wear and tear […]
noviembre 13, 2013
Question From a Customer: How to Report Strain at Break Following ASTM D638
Question From a Customer: How to Report Strain at Break Following ASTM D638 Elayne (Schneebacher) Gordonov Question: I am following ASTM D638-10, and my ‘strain at break’ results are nearly […]
octubre 28, 2013
Calling all Hockey Players: How Safe & Durable is Your Equipment?
Calling all Hockey Players: How Safe & Durable is Your Equipment? Imagine being struck by a hockey puck traveling 100+ MPH while on the ice. As is the daily grind […]
octubre 28, 2013
Challenges with Steel
Challenges with Steel The continual drive for improved safety and increased fuel efficiency within the automotive industry hasn’t escaped anyone; the message is repeatedly broadcast via news outlets and advertised […]
Perspectivas de los expertos de Instron.
Nuestro equipo de ingenieros de aplicaciones, especialistas en ensayos y expertos del sector comparten sus conocimientos: desde las normas de ensayo emergentes y las mejores prácticas hasta consejos prácticos, aplicaciones del mundo real y las últimas tendencias que definen el ensayo de materiales en todos los sectores. Suscríbase para recibir el Instron Update directamente, de modo que nunca se pierda la información que puede ayudar a su laboratorio a mantenerse a la vanguardia.