งานเขียน

ElectroPuls | E20000 Linear-Torsion (Combined) All-Electric Dynamic Test Instrument

Comparison of Standard Security vs. Local Traceability vs. Traceability in Bluehill Central

A features table comparing the standard Security in Bluehill Universal against the local Traceability module and Traceability in Bluehill Central.

300 kN Wedge Action Grips Data Sheet

Instron’s 300 kN manual wedge grips (catalog no. CP130950) are designed to provide a high-capacity gripping solution without the need for pneumatic or hydraulic actuation.

NVLAP Accredited on-site TUP Calibration

Instron professional services are now accredited to carry out on-site NVLAP calibrations for Strain Gauged TUPs, from 1kN up to 100kN under lab code 200301-0. This calibration is carried out directly on your testing instrument, enabling you to be back up and testing in few hours, minimizing the downtime of your equipment.

High-Accuracy Digital Displacement Sensor Data Sheet | CP134297

The digital displacement sensor has a stroke of ±12 mm (±0.47 in). The low contact force and low friction allow for the accurate measurement of linear displacement with the reference surface. The digital sensor can interface with 3300, 3400, 5900, and 6800 series testing systems. It is fully rationalized so it is automatically recognized with no calibration needed on these systems. There are several mounting configurations available, depending on the specimen type, the Instron model, and the test type. Mounting configurations include on platen displacement indicator and a magnetic base holder.

Certificate of Conformance – Bluehill Universal Calculation Test Suite

The Bluehill Universal Standard Calculation Test Suite compares results from the software under test with expected results using known data sets as input. The expected results are determined using a variety of independent methods including MathCad, Excel, hand calculation and visual inspection.

Calibration After Software Changes–Universal Materials Testing Machines

To ensure that your testing instrument is providing accurate data, we always recommend calibration of all transducers upon installation of the equipment on site (for a screw-driven machine, this would include force, speed and displacement of crosshead and strain if extensometers are used), and then recalibrations on a regular schedule thereafter.

Composites Testing Brochure

Instron’s universal testing machines are designed to perform the most common types of testing used in the composites industry, including but not limited to in-plane tensile, through thickness tensile, interlaminar shear, compression in end, shear, or combined loading, and compression after impact.

6800 Series Floor Model System Retrofits Data Sheet

6800 Series system retrofits allow older legacy Instron electromechanical floor model universal testing machines to be upgraded with the latest control electronics and testing software so you can enjoy the latest in testing technology.

6800 Series | Floor Model Universal Testing System Data Sheet

The 6800 Series universal testing machines are designed to perform tensile, compression, flex, peel, puncture, friction, shear tests, and more. These systems are compatible with hundreds of grips and fixtures found in Instron’s expansive accessories catalog, with specific configurations designed to perform many of the most popular ASTM and ISO tests.