Literatur
Bibliothek mit Druckschriften, Handbüchern, Whitepapers & Fallstudien
3 Point 4 Point Bend Fixture 2810-600
The 3-Point bend fixture is designed to easily provide the capability of a 3-point flexure test; it is suitable for both Dynamic & Static testing. The specimen is supported on two lower anvils and the load is applied in the centre of the specimen by a single upper anvil. The fixture has a variable span from 15 – 80 mm (0.59 – 3.15 in).
Produkte 07/26/2016 290.91 KB
3kN Compression Platens 2840-117
This compression fixture has been designed to easily provide the capability of compression testing. The platens are rigidly fixed and are non self-aligning. They have a high stiffness that resists off-centre loads; this retains the parallelism during specimen failure. The edge of the platen allows for the attachment of an LVDT, allowing you to measure the direct displacement between two equal sized platens during a compression test.
Produkte 06/03/2016 2.1 MB
Hip Femoral Fatigue Fixture ISO 7206
The hip femoral fatigue fixture was specifically designed to meet the enhanced requirements of ISO 7206-4. The fixture simulates the fatigue loading of a hip stem during a gait cycle.
Anwendungen 05/31/2016 542.57 KB
5980 Dual Column Floor Frames System Support
The System Support guide details the requirements, specifications, handling instructions, installation procedures, and maintenance details.
Handbücher 05/10/2016 2.29 MB
5980 Dual Column Floor Frames Operator Guide
The Operators‘ Guide provides the information you need to know to start testing after the system has been installed and set up for the first time. The document provides a detailed introduction, notes on prepping the system, and information on testing specimens.
Handbücher 05/03/2016 1.52 MB
5960 Dual Column Table Frames System Support
The System Support guide details the requirements, specifications, handling instructions, installation procedures, and maintenance details.
Handbücher 05/03/2016 1.48 MB
5960 Dual Column Table Frames Operator Guide
The Operators‘ Guide provides the information you need to know to start testing after the system has been installed and set up for the first time. The document provides a detailed introduction, notes on prepping the system, and information on testing specimens.
Handbücher 05/03/2016 1.13 MB
5940 Single Column Table Frames System Support
The 5940 System Support guide details the requirements, specifications, handling instructions, installation procedures, and maintenance details.
Handbücher 05/03/2016 1.37 MB
5940 Single Column Table Frames – Operator’s Guide
The Operators‘ Guide provides the information you need to know to start testing after the system has been installed and set up for the first time. The document provides a detailed introduction, notes on prepping the system, and information on testing specimens.
Handbücher 05/03/2016 1.05 MB
3380 Dual Column Floor Frames System Support
The System Support guide details the requirements, specifications, handling instructions, installation procedures, and maintenance details.
Handbücher 05/03/2016 571.36 KB