Literatur
Bibliothek mit Druckschriften, Handbüchern, Whitepapers & Fallstudien
2670 Series COD Gauges
Instron® Crack Opening Displacement transducers are designed
specifically to perform standard ASTM and ISO fracture mechanics
tests (both cyclic and static), covering all common specimen
geometries (CT, SEB, Centre Crack, Arc Shaped).
Each model offers class leading linearity, whilst being rugged
enough to withstand the high energy release common in many
of these applications and can be used at both elevated and sub
ambient temperatures.
These gauges comply with requirements laid down in ASTM E399-09.
Produkte 02/01/2013 506.56 KB
Franz Meller Appointed Area Sales Manager for Instron Testing Systems in Austria
Based in Dobersberg/Austria, Franz Meller is now the contact for the whole of Austria for all matters involving the purchase, modernisation and maintenance of Instron testing systems and
equipment.
Press Releases 01/31/2013 39.01 KB
10 CFR Part 21 Compliance
Learn how Instron’s calibration certificate aligns with U.S. Nuclear Regulatory Commission requirements under 10 CFR §21 and §50 Appendix B, ensuring compliance and quality assurance in regulated environments.
Quality 01/25/2013 198.94 KB
BioBox System Enables Testing at Body Temperature
Instron’s new BioBox temperature chamber meets the growing trend of
testing medical devices and biomaterials in a physiological state, i.e. at 37°C body temperature, as required by the relevant medical regulatory authorities.
Press Releases 01/25/2013 91.96 KB
2714-005 Pneumatic Cord and Yarn Grips
Pneumatic cord and yarn grips provide a convenient method for clamping fiber, cord, yarns and fine wires to reduce the problem associated with testing these materials. Rated capacity 1 kN.
Produkte 12/13/2012 778.59 KB
Shoulder Ended and Threaded Ended Tensile Grips | 2717-029
These tension grips (catalog no. 2717-029) are designed to perform static tensile tests on shoulder-ended and threaded-end test specimens to various international standards.
Produkte 11/30/2012 186.31 KB
GripHoist CP111030
Heavy grips and accessories can be awkward to install in
mechanical testing machines, and safety regulations limit the
amount that people can lift without risk of injury. For these
reasons it is typically necessary to use an external lifting
system – like a forklift or a crane – to lift and install grips or
accessories weighing much more than 15 kg (30 lbs). This is
typical for testing machines with capacities of 100 kN (22,000
lbf) and higher, thus requiring planning and working with
maintenance or facilities departments, all of which consumes
valuable testing time.
The Instron® GripHoist is designed to make the installation of
heavy grips possible without the use of external lifting systems.
It is intended for lifting accessories weighing up to 250 kg (500
lbs) into electromechanical or servohydraulic testing systems
that are fl oor mounted (not table mounted), and with capacities
of 100 kN (22,000 lbf) or more.
When used with Electromechanical testing systems, the moving
crosshead is used as the actual lifting mechanism, typically
with a fi xed length strap.
When used with servohydraulic testing systems, the upper
crosshead remains fi xed, and a “come-along” or other kind of
hoist is used to raise and lower the accessory.
Produkte 11/28/2012 181.67 KB
2810-005 Coefficient of Friction Fixture
The Instron® model 2810-005 Coefficient of Friction Fixture
measures the static and kinetic coeffi cient of friction of
plastic fi lm and sheet using the ASTM D1894 or
ISO 8295:2004 standards.
Produkte 11/28/2012 97.2 KB
CEAST Melt Flow Testers (MF20 and MF30)
The CEAST line of melt flow testers now includes the MF20 and MF30 Melt Flow Testers, which meet the stricter requirements imposed by ISO 1133-2 with regard to temperature control for highly sensitive materials.
Press Releases 11/27/2012 57.01 KB
Liefer- und Dienstleistungsbedingungen
Liefer- und Dienstleistungsbedingungen Instron Deutschland GmbH.
Corporate 11/26/2012 327.07 KB