Blog

Risorse » Blog » Page 3

Approfondimenti per i professionisti del collaudo dei materiali
Rimani aggiornato sulle tendenze del settore, sugli standard di prova internazionali, sulle linee guida applicative e sulle migliori pratiche per le apparecchiature. Esplora gli ultimi articoli degli ingegneri e degli specialisti Instron e iscriviti alla nostra newsletter per ricevere i nuovi contenuti direttamente nella tua casella di posta.

Abbonati

Filter Blog

Maggio 4, 2022

Drop Weight Impact Test: Top Tips for Accurate Results

Drop weight impact test calculations measure the toughness of polymers and composites used in many automotive and aerospace applications. Ensuring that these calculations are as accurate as possible is critical.

Instron Products

Aprile 18, 2022

Consigli per l’allineamento dell’estensimetro AutoX750

Cinque semplici passaggi per ottenere il corretto allineamento dell'estensimetro a contatto automatico AutoX750.

Marzo 15, 2022

Using a 3-Jaw Chuck for Materials Testing

In this video Instron Applications Engineer, Charlie Pryor, discusses how a 3-jaw chuck is a useful accessory to have in the lab for compression, tensile, torsion, rigidity, and tack testing applications. Compatible with Instron MT torsion testers, universal testing machines, and the torsion add-on, the 3-jaw chuck can be used to mount a variety of attachments, including probes, screwdriver bits, custom-made adapters, and can even be used to clamp directly onto specimens.

Gennaio 17, 2022

Manual or Automatic Melt Flow Index Testers

Melt flow index testers come in all shapes and sizes, from completely manual machines to largely automatic solutions. Here we look at the main benefits of combining manual and automatic features within the same plastic melt flow index tester solution.

Ottobre 1, 2021

Pendulum Impact Testing Machine or Drop Tower

How to choose the correct Impact Testing Equipment for the application

Agosto 23, 2021

Product Spotlight: Component Test Plate

In this video Instron Applications Engineer, Sammi Sadler, discusses a variety of ways the component test plate can be used to increase the versatility of your single and dual column universal testing systems. The component test plate is a drilled and tapped metal plate that gets mounted to the base of the testing frame. The entire surface is covered by an array of M6 threaded holes that make it ideal for performing tensile, compression, flexure, peel, and puncture testing on components and end products. It's also commonly used to mount standard and custom grips and fixtures off-center.