Documentazione istituzionale
Documentazione istituzionale per cataloghi, manuali, relazioni, casi studio
Industrial Series DX Models
Designed for high-capacity tensile, compression, bend/flex, and shear testing, DX Series testing systems feature a dual test space and single footprint. Understanding the critical importance of operator safety, these frames incorporate high-quality materials, components, and craftsmanship and are ideal for testing metals, wire rod, fasteners, concrete, and wood.
Prodotti 08/29/2022 1.03 MB
2501 Series Compression Platens
These easy-to-install compression platens are precisely machined fixtures that are designed for even distribution of compression loads during a test.
Prodotti 07/07/2022 403.08 KB
Brochure sui sistemi di test universali serie 3400
Sistemi di prova universali Instron serie 3400 per prove di trazione, compressione, flessione e altre prove di proprietà dei materiali.
Prodotti 06/27/2022 2.52 MB
Noise detection system
A typical passive vehicle damper is a compromise between handling properties of a car, passenger comfort and safety as well as NVH (Noise, Vibration, and Harshness). The dominant source of noise in today’s vehicles is from the suspension. This knocking noise (a transient of structural noise) is a result of the subtle vibration of chassis components. It occurs due to the vibrations of the piston rod in the shock absorber, making it a key element of a vehicle suspension system. The piston rod vibrations are caused by the continuous opening and closing motion of the valve, valve impacts, dry friction during stroking inversions and fluid cavitation. The purpose of our system (intended to measure the level of piston rod noise as a quality check of shock absorber in a production line) is ultimately to enhance overall vehicle performance, comfort and to facilitate a seamless transportation
Prodotti 06/22/2022 356.43 KB
2810 Series Mini Flexure Fixtures
This bend fixture is constructed from stainless steel and features a micrometer to adjust the location of the crack front and adjustable specimen stops for repeatable specimen alignment.
Prodotti 05/09/2022 564.47 KB
100 kN Flexure Fixture Data Sheet
The flexure fixture (catalog no. 2810-182) allows a variety of flexural and fracture toughness bond tests to be performed, including determination of flexural modulus, flexural strength and flexural yield strength.
Prodotti 05/09/2022 528.04 KB
2580 Series Static Load Cells Data Sheet
The 2580 Series load cells are specifically designed for use with 6800 and 5900 testing systems; offering exceptional performance with the ability to measure forces as low as 1/1000th of the force capacity to an accuracy of 0.5% of reading.
Prodotti 05/09/2022 641.71 KB
Scheda tecnica degli afferraggi pneumatici ad azione laterale serie 2712-04x
Gli afferraggi pneumatici Instron serie 2712-04x offrono un serraggio affidabile e autocentrante per un’ampia gamma di materiali, con opzioni da 1 a 10 kN. Progettati per la sicurezza e l’efficienza, presentano una sostituzione delle facce delle ganasce senza l’uso di attrezzi, forza di serraggio regolabile a controllo pneumatico, robusti meccanismi chiusi e componenti ergonomici che migliorano l’allineamento, l’usabilità e la protezione dell’operatore.
Prodotti 03/22/2022 1.13 MB
2712-05x Series Pneumatic Side Action Grips Data Sheet (50 N and 250 N)
The Instron 2712-05x Series Pneumatic Side-Action Grips offers a versatile gripping solution for a wide range of materials. Available in both 50 and 250 N options, the grip’s robust design is ideal for round (wires),fiber (mono-filaments), and flat specimens with or without shoulder.
Prodotti 03/22/2022 1.86 MB
Curved Needle Testing Systems
The Instron® Needle Testing System is ideally suited for needles used in abdominal, fistula, vascular, intestinal, or other surgical procedures. This system provides two different needle testing solutions: one for curved needle puncture testing and one for bend testing. The curved needle puncture testing fixture is used to evaluate needle sharpness and insertion force, while the needle bend testing fixture is used to evaluate flexural properties of the needle during use. With its tabletop design, the Curved Needle Testing System has a small footprint and takes up minimal benchtop space. The testing system operates with Instron Bluehill® 3 Software that provides test control, data acquisition,test results, and reports, as well as a large library of calculations.
Prodotti 03/18/2022 493.73 KB