Extensomètre à clipser à moyenne – Longueur de référence de 25 mm

Accessoires d'essai » Extensomètre à pince de moyenne » Extensomètre à clipser à moyenne – Longueur de référence de 25 mm » Page 10

Extensomètre à moyenne, longueur de référence de 25 mm, déformation de +5 / -2 %, sortie unique

N° de catalogue 2650-560

Averaging Axial Clipon Extensometer
Averaging Axial Clipon Extensometer

Extensomètre à moyenne Longueur de référence axiale de 25 mm fournissant une seule sortie axiale moyennée.

Caractéristiques :

  • Contacts d’échantillon remplaçables pour s’adapter à une gamme de matériaux et d’échantillons
  • Fixation et retrait simples, d’une seule main
  • Conception robuste pour un fonctionnement fiable dans des conditions exigeantes
  • Conforme aux normes ASTM E83 B-1, ISO 9513 grade 0.5 et ISO 527 (annexe C)

 

L’extensomètre fournit une seule sortie axiale moyennée. Il possède un étalonnage électrique et s’auto-identifie avec les systèmes des séries 3300, 3400, 4200, 4300, 4400, 4500, 5500, 5800, 5900, 6800, 8500, 8800 Tower et 8800MT.

Spécifications Documentation
Spécifications
Longueur de référence 25 mm
Course axiale -0,5 à +1,25 mm
% de course (axiale) -2 à +5 %
Épaisseur de l’échantillon 0 à 34 mm (0 à 1,34 po)
Largeur de l’échantillon 0,1 à 55 mm (0,004 à 2,17 po)
Plage de température -200 à 200 °C (-328 à 392 °F)
Hauteur de l’accessoire 40 mm (1,6 po)
Longueur de l’accessoire 110 mm (4,3 po)
Largeur de l’accessoire 120 mm (4,7 po)
Documentation

Extensomètre biaxial, longueur de jauge axiale de 50 mm

Accessoires d'essai » Extensomètre bi-axial Clip-on » Extensomètre biaxial, longueur de jauge axiale de 50 mm » Page 10

Extensomètre biaxial 50 mm de longueur de jauge ; 1 axial et 1 transversal

N° de catalogue 2650-563

Extensomètre biaxial 50 mm de longueur de jauge axiale, fournissant une mesure de déformation axiale moyenne et une mesure transversale.

Caractéristiques :

  • Contacts d’échantillon remplaçables pour s’adapter à une gamme de matériaux et d’échantillons
  • Fixation et retrait simples, d’une seule main
  • Conception robuste pour un fonctionnement fiable dans des conditions exigeantes
  • Conforme aux normes ASTM E83 B-1, ISO 9513 grade 0.5 et ISO 527 (annexe C)

Course transversale ±0,5 (la plage de déformation dépend de la largeur de l’échantillon)

L’extensomètre fournit une sortie axiale moyenne unique ainsi qu’une sortie transversale unique et nécessite 2 canaux de capteur. Il dispose d’un étalonnage électrique et s’auto-identifie avec les systèmes des séries 3300, 3400, 4200, 4300, 4400, 4500, 5500, 5800, 5900, 6800, 8500, 8800 Tower et 8800MT.

    Voir le catalogue des accessoires
    Caractéristiques Documentation
    Caractéristiques
    Course axiale -0,5 à +1,25 mm ( in)
    Longueur de jauge 50 mm ( in)
    Diaphonie maximale 0,5 % de la pleine échelle ( )
    % de course (axiale) -1 à 2,5 % ( )
    Diamètre de l’échantillon 0,1 à 34 mm (0,004 à 1,34 in)
    Épaisseur de l’échantillon 0,1 à 34 mm (0,004 à 1,34 in)
    Largeur de l’échantillon 0,1 à 55 mm (0,004 à 2,17 po)
    Température nominale -200 à +200 °C (-328 à +392 °F)
    Course (transversale) ±0,5 mm ( in)
    Documentation

    Pneumatic Wedge Action Grips; Capacity: 200 kN

    Accessoires d'essai » Mors de traction » Pneumatic Wedge Action Grips » Pneumatic Wedge Action Grips; Capacity: 200 kN » Page 10

    Pneumatic Wedge Action Grips; Capacity: 200 kN

    2716-121 | Pneumatic Wedge Action Grips

    Capacity: 200 kN (40,000 lb, 20,000 kg)

    Upper and lower fittings: Type llm (M48 X 2 LH)

    Maximum specimen thickness: 40 mm (flat)

    Maximum specimen width: 75 mm (flat)

    Maximum specimen diameter: 50 mm (round)

    Clamping length: 70 mm.

    Temperature range: ambient only

    Requires faces

    Includes an air distribution kit with both, 1/4 NPTM (7/16-20), and 1/4 inch hose barb end connections

    An Automatic Air Control Kit or Footswitch is recommended

    View Accessories Catalog
    Littérature Modules complémentaires Tableau des spécifications
    Littérature

    2716 Series Pneumatic Wedge Action Grips Data Sheet

    The Pneumatic Wedge Action Grips, available in 100 or 200 kN, provide a convenient method of clamping both large round and flat specimen shapes, up to a 50 mm (2 in) diameter, or flat specimens up to 40 mm (1.57 in) thick respectively. V-face grips are used for round specimens by design and have a reduced area at the center that compromises their ability to absorb high-energy breaks without fracture. This grip uses a split V-face configuration that allows the break energy to be dissipated without damaging the faces.

    • Produits
    • 08/20/2014
    • 152.52 KB

    Modules complémentaires
    Tableau des spécifications

    Hydraulic Grip Pump

    Accessoires d'essai » Accessoires de bâti » Hydraulic Grip Pump » Page 10

    Hydraulic Grip Pump

    2718-500 Hydraulic Grip Pump Angled
    2718-500 Hydraulic Grip Pump Angled 2718-500 Hydraulic Grip Pump 2718-500 Hydraulic Grip Pump Perspective 2718-500 Hydraulic Grip Pump Close Up 2718-500 Hydraulic Grip Pump Controller 2718-500 Hydraulic Grip Pump Rear 2718-500 Hydraulic Grip Pump Connections 2718-500 Hydraulic Grip Pump Power Connector

    2718-550 | Hydraulic Grip Pump

    The Instron 2718-550 hydraulic grip pump is designed for continuous 24/7 operation in manual and automated testing systems in industrial environments.

    It can be configured to provide a maximum pressure of 207 bar (3000 PSI for use with wedge grips), or alternatively 138 bar (1900 PSI) for use with side acting grips. The unit incorporates two analogue pressure gauges, that are easily visible to the operator from the front of the pump.

    The 2718-550 pump is configured to operate with a two stage flow speed, with a higher flow rate up to 69bar (1000psi) to increase productivity. Once clamping the specimen the pressure will then increase to the full pressure at the slower flow rate.

    Principle of Operation

    The 2718-550 hydraulic grip pump is activated by a footswitch, while a handset provides close/open functionality of each grip independently. The gripping pressure is easily configured by an electrical adjustment knob located on the front of the pump.

    Features and Benefits

    • Dual Stage gripping pressure - improving operator safety & preventing specimen damage while reducing closing time
    • Easy to use grip control handset
    • Meets CE, CSA & UL requirements
    • Long service life with minimal maintenance required
    • Hose whip restraint system - to ensure operator safety in cases of hose failure
    • Upper & Lower grips can be closed/opened independently
    • 2 Wheels make maneuvering simple
    • Quiet operation minimizes operator discomfort - Less than 65 dB at full pressure
    • 3um Filter - Preventing damage to pump or grip components from dirt/debris
    • Easily visible sight glass to check oil level & condition

     

    Compatible Grips

    Grip Type Static Load Capacity Catalog No.
    Advanced Hydraulic Wedge Action Grips ±130 kN 2743-401
    Advanced Hydraulic Wedge Action Grips ±312 kN 2742-501
    Advanced Hydraulic Wedge Action Grips ±600 kN 2742-601
    Hydraulic Dual Side Action Grips 250 kN W-5450
    Hydraulic Dual Side Action Grips 600 kN W-5420
    View Accessories Catalog
    Littérature Tableau des spécifications
    Littérature

    2718-550 Hydraulic Grip Pump

    The Instron® 2718-550 hydraulic grip pump is designed for continuous 24/7 operation for both manual and automated testing systems in industrial environments

    • Produits
    • 09/02/2020
    • 201.71 KB

    Tableau des spécifications

    0.5 in Socket Drive Torsion Grips, English

    Accessoires d'essai » Mors de traction » Torsion and Axial-Torsion Grips » Socket Style » 0.5 in Socket Drive Torsion Grips, English » Page 10

    0.5 in Socket Drive Torsion Grips, English

    W-MT03-M_P
    W-MT03-M_P

    W-MT03 | Socket drive set (US)

    Includes:

    • Two complete 6 point US Customary socket sets with
      11 pieces, each ranging from 3/8 inch to 1 inch in 1/16 inch
      increments.
    • Two 1/2 inch drive adapters for motor and torque cell
      mounting.
    • Adapting thread: M12 x 1.75m
    • Max Capacity: 57 Nm (500 lbf-in)
    View Accessories Catalog
    Tableau des spécifications
    Tableau des spécifications
    Accessory Length 60.3 mm (2.375 in)
    Lower Fitting M12x1.75mRH
    Specimen Diameter mm (0.375 - 1.000 in)
    Torque Capacity 57 Nm (500 in-lb)
    Upper Effective Length 47.6 mm (1.875 in)
    Upper Fitting M12x1.75mRH

    Food Fixture Drip Tray

    Accessoires d'essai » Dispositifs pour tests alimentaires » Food Fixture Drip Tray » Page 10

    Food Fixture Drip Tray

    Catalog no. S5400A

    S5400A Food Fixture Drip Tray
    S5400A Food Fixture Drip Tray

    S5400A | Food Fixture Drip Tray

    Capacity: 2 kN

    Size: 180 x 180mm (7.1 X 7.1 in) Drip tray.

    Lower fitting: 1/2 in clevis, male.

    Upper fitting: Requires a food fixture.

    Provides a 6 mm clevis, female connection to directly mount other accessories

    View Accessories Catalog
    Modules complémentaires Tableau des spécifications
    Modules complémentaires

    • Confectionary Holder
    • Kramer Shear Cell
    • Ottawa Texture Cell
    • Back Extrusion Food Cell
    • Warner Bratzler Meat Shear Fixture
    • Tortilla / Pastry Burst test Fixture
    • Dough Extensibility Fixture
    • Pasta Buckling Flexure Fixture
    • Pasta Firmness/Stickiness Test
    • Multiple Pea/Berry Puncture Fixture
    Tableau des spécifications

    Pitching

    Accessoires d'essai » Accessoires de simulation de crash » Pitching » Page 10

    Pitching

    crash simulation pitching
    crash simulation pitching

    Active controlled pitch simulation

    The active controlled pitch simulation load unit offers a significant advantage through more realistic crash simulations and better reproduction of the dummy injury criteria. In a frontal impact, the deceleration and deformation of the vehicle body is almost always accompanied by a movement in the vertical plane. In most cases, this movement is a combination of a rotation around a point in the space in front of the vehicle with an additional vertical movement.

    Pitching in crash events directly influences the acceleration and the movement path of the occupant during an impact. These movements together with the strong frontal deceleration during the impact determine the severity of the injury in interaction with the seatbelt and airbag. One focus of security system development is the management of the Head Injury Criteria (HIC) value. Earlier analyzes have shown up to 40% difference between the HIC values of sled tests with and without the possibility of pitch motion simulation. Further influences are found for neck accelerations and belt forces.

    The Instron CSA systems with active pitch simulation are currently successfully used by 14 customers.

    Back to CSA

    À utiliser Tableau des spécifications
    À utiliser

    Tableau des spécifications

    Isolation Mounts for 8801 or 8516 (1 set); For Testing Frequencies Above 15Hz.

    Accessoires d'essai » Accessoires de bâti » 8800 Series Servohydraulic Test Systems » Air Cushion Isolators » Isolation Mounts for 8801 or 8516 (1 set); For Testing Frequencies Above 15Hz. » Page 10

    Isolation Mounts for 8801 or 8516 (1 set); For Testing Frequencies Above 15Hz.

    No image available - Instron

    1300-009 | Isolation mounts for 8801 or 8516 (1 set)

    Suitable for testing frequencies above 15Hz

    View Accessories Catalog
    Tableau des spécifications
    Tableau des spécifications
    Compatible Frame Models Isolation mounts for 8801 or 8516 (1 set). For testing frequencies above 15Hz.

    Air Compressor, Portable; Line Voltage: 240 VAC

    Accessoires d'essai » Mors de traction » Pneumatic/Hydraulic Power Supplies » Air Compressor, Portable; Line Voltage: 240 VAC » Page 10

    Air Compressor, Portable; Line Voltage: 240 VAC

    No image available - Instron

    2810-060 | Air Compressor, portable

    Line Voltage: 240 VAC.

    View Accessories Catalog
    Tableau des spécifications
    Tableau des spécifications
    Description Air Compressor, portable. Line Voltage: 240 VAC.

    Biaxial Extensometer 50 mm Gauge Length

    Accessoires d'essai » Extensomètre bi-axial Clip-on » Biaxial Extensometer 50 mm Gauge Length » Page 10

    Biaxial Extensometer 50 mm Gauge Length

    Biaxial Clip on Extensometer
    Biaxial Clip on Extensometer

    Biaxial Extensometer 50 mm Axial Gauge Length providing 2 independent axial and one transverse strain measurement.

    Features:

    • Replaceable specimen contacts to suit a range of materials and specimens
    • Simple, single handed attachment and removal
    • Robust design for reliable operation under demanding conditions
    • Meets ASTM E83 B-1, ISO 9513 grade 0.5 and ISO 527 (annex C)

    Transverse travel +/- 0.5 mm (Strain range depends on specimen width)

    The extensometer provides 2 independent axial outputs along with a single transverse output and requires 3 sensor channels. It has electrical calibration and is self-identifying with 3300, 3400, 4200, 4300, 4400, 4500, 5500, 5800, 5900, 6800, 8500, 8800 Tower, and 8800MT Series Systems. The extensometer is supplied with a single set of conical point specimen contacts.

    View Accessories Catalog
    Littérature Tableau des spécifications
    Littérature

    Averaging Axial and Biaxial Clip-On Extensometers

    These bi-axial and averaging axial clip-on extensometers use strain gauges for measurement and are constructed from high-strength aluminum, titanium, and stainless steel. All of the extensometers feature simple, single-handed operation. The extensometer incorporates automatic electrical calibration and transducer recognition including a unique digital serial number.

    • Produits
    • 05/12/2021
    • 1008.68 KB

    Tableau des spécifications

    Pneumatic Lead Pull Grip. Rated capacity: 500 N

    Accessoires d'essai » Mors de traction » Mâchoires de traction pour la microélectronique » Pneumatic Lead Pull Grip. Rated capacity: 500 N » Page 10

    Pneumatic Lead Pull Grip. Rated capacity: 500 N

    2712-212_P
    2712-212_P

    2712-212 | Pneumatic Lead Pull Grip

    Capacity: 500 N (100 lb, 50 kgf)

    Includes a single grip with lead pull jaw faces.

    Temperature range: 0°C to 60°C (32°F to 140°F).

    Fitting: Type Om (12 mm connection with 6 mm clevis pin). The pneumatic lead pull grip is a parallel action pneumatically operated vice action grip fitted with needle nose jaw faces for lead pull testing.

    Requires an automatic air kit.

    1 Grip Only.

    View Accessories Catalog
    Modules complémentaires Tableau des spécifications
    Modules complémentaires

    • Jaw Faces (Serrated, needle nose)
    Tableau des spécifications

    1000°C Three-Zone Split Furnace for Low Cycle Fatigue Testing

    Accessoires d'essai » Enceintes climatiques et fours » Fours » 1000°C Three-Zone Split Furnace for Low Cycle Fatigue Testing » Page 10

    1000°C Three-Zone Split Furnace for Low Cycle Fatigue Testing

    Three-zone Split Furnace
    Three-zone Split Furnace W8518HPjpg FurnaceAccessoriesPjpg Furnaces W754XXP2jpg

    3117-200 | 1000°C Three-Zone Split Furnace for Low Cycle Fatigue Testing

    Features:

    • 90mm bore diameter, 358mm overall height (furnace only)
    • Three-zone split furnace configuration with durable embedded heating elements
    • 1000 °C (1832 °F) nominal maximum specimen temperature (dependent on load string configuration)
    • 300 - 600 °C (572 - 1112 °F) nominal minimum specimen temperature (dependent on load string configuration and test conditions)
    • High efficiency insulation (refractory ceramic fibre free)
    • Extensometer cut-out, full width, 76 mm high
    • Extensometer slot 40 mm high x 15 mm wide
    • Nominal power rating 3kW

    Includes side port insulation plug for blanking extensometer slot.

    Requires temperature controller with thermocouples, support brackets, and top/bottom insulating port plugs (not included)

    View Accessories Catalog
    À utiliser Modules complémentaires Tableau des spécifications
    À utiliser

    • Axial Extensometer; 12.5mm Gauge Length +20% -10% Capacity
    • Axial Extensometer; 12.5mm Gauge Length, +20% / -10% Capacity
    • Strain Gauge Extensometer; 25mm Gauge Length, +10% -5% Capacity
    • High-Temp Extensometer; 25mm Gauge Length, +10% -5% Capacity
    • Leaf Spring Mounting for 2632-054, -055, 056 and -057 Extensometers
    Modules complémentaires
    Tableau des spécifications