novembre 13, 2013

Question From a Customer: How to Report Strain at Break Following ASTM D638

Question From a Customer: How to Report Strain at Break Following ASTM D638

Question From a Customer: How to Report Strain at Break Following ASTM D638 Elayne (Schneebacher) Gordonov Question: I am following ASTM D638-10, and my ‘strain at break’ results are nearly […]

octobre 28, 2013

Calling all Hockey Players: How Safe & Durable is Your Equipment?

Calling all Hockey Players: How Safe & Durable is Your Equipment?

Calling all Hockey Players: How Safe & Durable is Your Equipment? Imagine being struck by a hockey puck traveling 100+ MPH while on the ice. As is the daily grind […]

octobre 28, 2013

Challenges with Steel

Challenges with Steel

Challenges with Steel The continual drive for improved safety and increased fuel efficiency within the automotive industry hasn’t escaped anyone; the message is repeatedly broadcast via news outlets and advertised […]

octobre 28, 2013

Question from a Customer: What tup do I use on my 1,800 J (1,330 ft-lb) drop tower?

Question from a Customer: What tup do I use on my 1,800 J (1,330 ft-lb) drop tower?

Question from a Customer: What tup do I use on my 1,800 J (1,330 ft-lb) drop tower? As a starting point for this response, the 1,800 J is the impact […]

octobre 17, 2013

Carbon Fiber Hits the Road

Carbon Fiber Hits the Road

Carbon Fiber Hits the Road Leonardo Martinez The Drive for Lightweight Cars By 2016, the US car industry will need to average 34.5 mpg and by 2025, cars will need […]

octobre 8, 2013

Poisson’s Ratio Testing With A Biaxial Extensometer

Poisson’s Ratio Testing With A Biaxial Extensometer

Poisson’s Ratio Testing With A Biaxial Extensometer Elayne (Schneebacher) Gordonov Poisson’s Ratio has proven to be a challenging calculation for obtaining both repeatable and accurate results. To improve repeatability, we […]

septembre 30, 2013

Simulating a Spring with the ElectroPuls

Simulating a Spring with the ElectroPuls

Simulating a Spring with the ElectroPuls Sarah Jastram As the number of patients seeking « in-home » medical care grows larger, medical device companies find themselves catering to an increasing demand for […]

septembre 25, 2013

Upper Yield Calculations—Discontinuous Yielding/YPE Material

Upper Yield Calculations—Discontinuous Yielding/YPE Material

Upper Yield Calculations-Discontinuous Yielding/YPE Material David Fry Following a recent lab visit, I thought it was worth writing a quick post to share an example of how labs sometimes incorrectly […]

septembre 13, 2013

What Does Load Measurement Accuracy of 0.5% of Reading Down to 1/100th, 1/500th, 1/1000th of a Load Cell’s Capacity Imply?

What Does Load Measurement Accuracy of 0.5% of Reading Down to 1/100th, 1/500th, 1/1000th of a Load Cell’s Capacity Imply?

What Does Load Measurement Accuracy of 0.5% of Reading Down to 1/100th, 1/500th, 1/1000th of a Load Cell’s Capacity Imply? Janice Tan First of all, there are two important pieces […]