Documentation
Bibliothèque de Brochures, Manuels, Articles techniques et Etudes de cas
Zwarp Biaxial &Triaxial Test for Wheels & Hubs
Biaxial HydropulsTM test rigs for automotive wheels and hubs – POD: IST0032 AE
Produits 02/22/2005 106.63 KB
History of SATEC™
SATEC™’s origins trace back to the early 1900’s and encompass a number of famous testing equipment companies including Southwark™, Baldwin™, Wiedemann™, Sonntag™, and Arcweld™.
Corporate 02/21/2005 576.35 KB
Effects of Temp. Changes on Elastomer Seals
Article from: Elastomer Seal Performance, January 2002.
Whitepapers 02/21/2005 124.65 KB
Tortilla Test
Application Report to quickly assess the ability of the In-Spec 2200 Bench-Top Mechanical Tester to perform tensile tests on tortilla. This was done without any special fixturing. For demonstration purposes only. POD_AR_tortilla_001A_0902
Applications 02/21/2005 93.98 KB
Tensile Testing of Stainless Steel Tubing with the AVE
Stainless steel tubing (or any other variety of rigid metallic tubing) can be difficult to test in tension for two reasons. Standard methods of gripping will cause the tubing to collapse and lead to pre-mature failure of the specimen. Strain measurement is also usually not possible with traditional clip-on extensometers because the knife-edges lead to high stress concentrations and
consequently failure of the thin specimen wall. The purpose of this testing was to recommend a gripping solution and evaluate the use of the Advanced Video Extensometer (AVE) for accurate, non-contacting strain measurement.
Applications 01/07/2005 191.97 KB
2717 Series O-Ring Test Fixture
The O-ring test fixture has been designed to facilitate the testing of O-rings and similar continuous loop specimens where it is essential to minimize localized stressing in the sample.
Produits 01/07/2005 7.77 MB
2620 Series Dynamic Strain Gauge Extensometer
Wide operating temperature range, from -80 °C to 200 °C (-112 °F to 392 °F)
Designed to meet the requirements of ISO 9513, BS 3846 and ASTM E 83
Produits 01/05/2005 2.56 MB
2713 Series Self-tightening Roller Grips
The self-tightening grips are primarily designed for the precision testing of elastomeric and other flexible materials exhibiting a large reduction in cross-section area under load. They provide excellent testing accuracy, positive non-slip gripping action, and are quick and simple to use.
Produits 12/13/2004 419.17 KB
2713-002, 004 Series Self-tightening Roller Grips
The self-tightening grips are primarily designed for the precision testing of elastomeric and other flexible materials exhibiting a large reduction in cross-section area under load. Temperature range: -20 °C to 150 °C (-4 °F to 300 °F)
Produits 12/13/2004 419.17 KB
Screw Side Action Grips | Catalog No. 2710-004
Screw side action grips provide a very simple and efficient method for holding flat test specimens in applications where you must easily insert the specimen and quickly apply a clamping force.
Produits 12/13/2004 480.64 KB