Instron's® CT6 automation platform can be integrated onto torsion-capable systems, increasing the range of applications. In the pharmaceutical industry, many container closures utilize threaded connections for preventing accidental separation. This system is evaluating the unscrewing torque for luer tip caps, defined by ISO 11040-4 Annex G.5. Introducing automation removes operator influence from misalignment and reduces the burden for the operator to load and unload the entire sample, allowing them to dedicate their time to more important tasks.

The TrendTracker module in Bluehill Central accelerates the data analysis workflow of your lab. An intuitive interface allows you to quickly search, display, and analyze results over time and across multiple samples and test systems. Say goodbye to tedious file searching and copy-pasting of data.

Instron universal testing machines are designed to perform tensile, compression, flex, peel, puncture, friction, and shear tests — and more. This video provides a basic introduction to using an Instron universal testing machine. You will learn the basic parts of the testing system, how to power on the machine, and the primary safety features of the equipment.

Puncture testing (EN 14477) of separator film is critical to ensure the safety and longevity of each cell throughout the life cycle of a battery. Film must be strong enough to withstand punctures from dendrites that form with extensive use. Ensuring proper specimen tautness and alignment of an upper probe are critical for this application.

Cylindrical cells require several welds during assembly, including the cathode tab to the cap of the cell, the anode tab to the base of the can, and even the tab-to-tab individual welds. All of these require proper alignment and gripping solutions for high throughput and repeatable results.

Electric vehicle batteries require countless welds between electrodes, tabs, casings, and cells. Understanding the most common failure modes and strength of each weld is critical for determining the life of a battery.

Advanced Hydraulic Wedge Action Grips are versatile grips that can be used in both static and dynamic materials testing applications — up to 500 kN force capacity for dynamic tests, and up to 600 kN for static tests. Ideal for metals and composites testing, the interchangeable grip jaw faces accommodate both flat and round specimens, and the grip design maintains a constant gripping force on the test specimen, regardless of the applied test forces. The grips can easily be configured for compression testing with the use of piggyback load string adapters.

The pneumatic 90° peel fixture was developed specifically for electrode adhesion testing. This peel fixture is designed to help an operator align and clamp down a specimen quickly and consistently while ensuring that a 90° angle can be maintained from start to finish. With its improved clamping and specimen alignment aids, the fixture provides greater repeatability, throughput, and reduced operator involvement over a standard manually controlled and set up peel fixture.

Universal testing systems can simultaneously measure the mechanical and electrical properties for your device.