Product Manuals
AVE3 & SVE3 Video Extensometer Operator’s Guide
Learn how to use your AVE3 or SVE3 video extensometer system components and controls, set limits, perform calibration, and complete other common operating procedures.
Manuel 06/17/2026 3.16 MB
Manuel de préinstallation du modèle de table à double colonne 68TM-100
Ce manuel de préinstallation couvre tout le nécessaire pour préparer votre installation et transporter en toute sécurité le système d’essai de table à double colonne modèle 68TM-100 avant l’installation — y compris les conditions environnementales, les dimensions et poids du système, les procédures de levage et de manutention, ainsi que les spécifications de performance. Pour la connexion, la configuration et le fonctionnement des composants, reportez-vous au Guide de l’opérateur.
Manuel 06/01/2026 1.3 MB
Manuel de préinstallation du modèle de table à double colonne 34TM-100
Ce manuel de préinstallation couvre tout ce qui est nécessaire pour préparer votre site et transporter en toute sécurité le système d’essai de table à double colonne 34TM-100 avant l’installation, notamment les conditions environnementales, les dimensions et les poids du système, les procédures de levage et de manutention, ainsi que les spécifications de performance. Pour le raccordement des composants, la configuration et l’utilisation, reportez-vous au Guide de l’opérateur.
Manuel 05/28/2026 1.25 MB
Specimen Marking Guide for Instron’s Video Extensometer
The AVE and SVE extensometers measure strain or extension by tracking markings applied to the specimen.
Manuel 05/27/2025 1.04 MB
Série de machines au sol 3400 – manuel d’utilisation
Le manuel d’installation fournit les informations dont vous avez besoin pour commencer les tests après l’installation et la configuration du système pour la première fois. Le document fournit une introduction détaillée, des notes sur la préparation du système et des informations sur les éprouvettes à tester.
Manuel 04/10/2025 1.89 MB
Torsion Add-On Version 3 Operator’s Guide
The Torsion Add-on system comprises a compatible electromechanical load frame, e.g. 6800 Series, a secondary motor mounted to the moving crosshead, a torsion controller assembly mounted to the column of the load frame and a suitable biaxial load cell mounted to the base adapter This configuration provides torque to the specimen which allows biaxial testing of specimens.
Manuel 02/14/2022 576.66 KB
Série de machines de table 6800 – manuel d’utilisation
Le manuel d’installation fournit les informations dont vous avez besoin pour commencer les tests après l’installation et la configuration du système pour la première fois. Le document fournit une introduction détaillée, des notes sur la préparation du système et des informations sur les éprouvettes à tester.
Manuel 02/14/2022 2.47 MB
2713-002 Self Tightenting 5kN Rubber Grips – Operating and Installation Manual
This guide provides general instructions on how to use your component. This manual also includes specifications for the component as well as drawings.
Manuel 08/06/2020 366.06 KB
2701-065 Pneumatic Grip Control – Reference Manual
The 2701 Series Pneumatic Grip Control is a unit that operates pneumatic action grips.This guide provides instructions on how to use your component and other frequently performed operating tasks. This manual covers specifications, installation, operations and maintenance.
Manuel 08/06/2020 1.4 MB
2701-004 Pneumatic Footswitch – Operator’s Guide
The pneumatic foot switch is designed to provide sequential grip actuation, keeping the operator’s hands free to align the test specimen in the grips. This guide provides instructions on how to use your component and other frequently performed operating tasks. This manual covers specifications, installation, operations and maintenance.
Manuel 08/06/2020 188.44 KB
2820-035 and 2820-036 Peel Test Fixtures – Equipment Reference
Instron’s 90° Peel Test Fixture (Model 2820-035) and the Variable Angle Peel Test Fixture (Model 2820-036) are testing devices designed to measure the force required to peel a sample from its backing material or substrate. This guide provides instructions on how to use your components and other frequently performed operating tasks. This manual covers specifications, installation, operations and maintenance.
Manuel 08/06/2020 2.35 MB
2711-006 Miniature Grips for Low-Force Testing – Operator’s Guide
This guide provides instructions on how to use your components and other frequently performed operating tasks. This manual covers specifications, installation, operations, maintenance and illustrated parts.
Manuel 08/06/2020 779.95 KB
Model 2810-005 Coefficient of Friction Testing Fixture – Equipment Reference
This guide provides instructions on how to use your components and other frequently performed operating tasks. This manual covers specifications, installation, operations and illustrated parts.
Manuel 08/04/2020 1.08 MB
Series 2714 and 2734 Cord and Yarn Grips – Equipment Reference
This guide provides instructions on how to use your components and other frequently performed operating tasks. This manual covers installation and preparing for use, as well as maintenance and replaceable parts.
Manuel 08/04/2020 379.57 KB
2716-2736 – 100 and 150kN Wedge Grips – Operating Instructions
This guide provides instructions on how to use your components and other frequently performed operating tasks. This manual covers installation, operation and maintenance.
Manuel 08/04/2020 1.49 MB
5kN, 30kN and 50kN Wedge Grips – Reference Manual
This guide provides instructions on how to use your components and other frequently performed operating tasks. This manual covers three types of grips: 5kN, 30kN and 50kN Wedge Grips
Manuel 08/04/2020 1.17 MB