Manuals

Torsion Add-On Version 3 Operator's Guide

The Torsion Add-on system comprises a compatible electromechanical load frame, e.g. 6800 Series, a secondary motor mounted to the moving crosshead, a torsion controller assembly mounted to the column of the load frame and a suitable biaxial load cell mounted to the base adapter This configuration provides torque to the specimen which allows biaxial testing of specimens.

Download

Manual 2/14/2022 0.6 MB

6800 Dual Column Table Model Operator's Guide

The Operators' Guide provides the information you need to know to start testing after the system has been installed and set up for the first time. The document provides a detailed introduction, notes on prepping the system, and information on testing specimens.

Download

Manual 2/14/2022 2.3 MB

2713-002 Self Tightenting 5kN Rubber Grips - Operating and Installation Manual

This guide provides general instructions on how to use your component. This manual also includes specifications for the component as well as drawings.

Download

Manual 8/6/2020 366.1 KB

2701-065 Pneumatic Grip Control - Reference Manual

The 2701 Series Pneumatic Grip Control is a unit that operates pneumatic action grips.This guide provides instructions on how to use your component and other frequently performed operating tasks. This manual covers specifications, installation, operations and maintenance.

Download

Manual 8/6/2020 1.4 MB

2701-004 Pneumatic Footswitch - Operator’s Guide

The pneumatic foot switch is designed to provide sequential grip actuation, keeping the operator’s hands free to align the test specimen in the grips. This guide provides instructions on how to use your component and other frequently performed operating tasks. This manual covers specifications, installation, operations and maintenance.

Download

Manual 8/6/2020 188.4 KB

2820-035 and 2820-036 Peel Test Fixtures - Equipment Reference

Instron’s 90° Peel Test Fixture (Model 2820-035) and the Variable Angle Peel Test Fixture (Model 2820-036) are testing devices designed to measure the force required to peel a sample from its backing material or substrate. This guide provides instructions on how to use your components and other frequently performed operating tasks. This manual covers specifications, installation, operations and maintenance.

Download

Manual 8/6/2020 2.3 MB

2711-006 Miniature Grips for Low-Force Testing - Operator’s Guide

This guide provides instructions on how to use your components and other frequently performed operating tasks. This manual covers specifications, installation, operations, maintenance and illustrated parts.

Download

Manual 8/6/2020 0.8 MB

Model 2810-005 Coefficient of Friction Testing Fixture - Equipment Reference

This guide provides instructions on how to use your components and other frequently performed operating tasks. This manual covers specifications, installation, operations and illustrated parts.

Download

Manual 8/4/2020 1.1 MB

Series 2714 and 2734 Cord and Yarn Grips - Equipment Reference

This guide provides instructions on how to use your components and other frequently performed operating tasks. This manual covers installation and preparing for use, as well as maintenance and replaceable parts.

Download

Manual 8/4/2020 379.6 KB

2716-2736 - 100 and 150kN Wedge Grips - Operating Instructions

This guide provides instructions on how to use your components and other frequently performed operating tasks. This manual covers installation, operation and maintenance.

Download

Manual 8/4/2020 1.5 MB

5kN, 30kN and 50kN Wedge Grips - Reference Manual

This guide provides instructions on how to use your components and other frequently performed operating tasks. This manual covers three types of grips: 5kN, 30kN and 50kN Wedge Grips

Download

Manual 8/4/2020 1.2 MB

2830-036 Miniature Grips for Low-Force Testing - Reference Manual

This guide provides instructions on how to use your components and other frequently performed operating tasks. This manual covers four types of grips: a set of mechanical action wedge grips, manually operated screw grips, a set of chuck grips similar to the chuck on an electric drill, and a set of pincer-action fiber grips. The four types of grips described are covered throughout this manual. The manual is divided into chapters covering description, specifications, installation, operation, maintenance, and parts breakdown. The chapters are subdivided into information about each type of grip.

Download

Manual 8/4/2020 0.8 MB

2710-11x Screw Action Grips - Reference Manual

This guide provides instructions on how to use your components and other frequently performed operating tasks.

Download

Manual 8/4/2020 0.8 MB

5 kN Flexure Fixture - Reference Manual

This manual provides information on your flexure fixture as well as, instructions regarding procedures for installation, operation and maintenance.

Download

Manual 7/22/2020 1.2 MB

2712 Series Pneumatic Side-Action Grips - Health and Safety Information

Pneumatic grips are designed to apply a high clamping force on test specimens. For your safety follow the warnings in this guide and refer to numbered symbols and images on page 2

Download

Manual 7/22/2020 0.6 MB

2712 Series Pneumatic Side-Action Grips - Operator’s Guide

This manual provides instructions on how to use your grip components and controls as well as procedures for installation, operation and maintenance.

Download

Manual 7/22/2020 1.7 MB