The following is a listing of all of the pre-configured test methods available in Bluehill Universal materials testing software.
- ASTM D1876-08 (2023)
- ASTM D903-98 (2017)
- ASTM D3163-01 (2023)
- ASTM F88-23
- ISO 11339 (2022)
- ISO 813 (2019)
- ISO 4578 (1997)
- ISO 29862 (2019)
- EN 1465 (2009)
- EN 1719 (1999)*
*Requires TestProfiler
- ASTM F2458-05 (2024)
- ASTM F2516-22*
- ASTM F2606-08 (2021)
- ASTM F2256-24
- ASTM F88-23
- EN 455-2 (2024)
- ISO 7886-1 Annex E (2018)*
- ISO 80369-20 (2015)**
- ISO 11040-4 (2024)
- Residual Seal Force (RSF)
- ISO 11608 (2022)***
- Autoinjector SST and Alignment***
- BD Ultrasafe Plus™***
*Requires TestProfiler
**Requires the Torsion Add-On and TestProfiler
***Requires Autoinjector Testing System and TestProfiler
- Airbus AITM 1-0002 (Issue 3 November 1998)
- Airbus QVA-Z10-46-05 (Issue No.: 2.0 28.10.05)
- AITM 1-0005 (Issue 2 June 1994)
- AITM 1-0007 (Issue 3 Dec 2004)
- AITM 1-0008 (Issue 5 July 2010)
- AITM 1-0009 Issue 3 November 2003)
- AITM 1-0010 (Issue 3 October 2005)
- ASTM C365-22
- ASTM C1358-18
- ASTM D1781-98 (2021)
- ASTM D2344-22
- ASTM D3039-17
- ASTM D3410-16
- ASTM D3518-18
- ASTM D3846-15
- ASTM D4018-23
- ASTM D5379-19
- ASTM D5766-23
- ASTM D5961-23
- ASTM D6641-23
- ASTM D7137-23
- EN 2243-3 (2005)
- EN 2377 (1989)
- EN 2561 (2012)
- EN 2563 (1997)
- EN 2597 (1998)
- EN 2850 (2017)
- ISO 527-4 (2023)
- ISO 527-5 (2021)
- ISO 14125 (1998)
- ISO 14126 (2023)
- ISO 14129 (1997)
- ISO 14130 (1997)
- prEN 6033 (2015)
- Spring templates
- ASTM A370-24
- ASTM A615-24
- ASTM C39-23
- ASTM C78-21
- ASTM E8 / E8M-24*
- ASTM E21-17e1
- ASTM E345-24
- ASTM E517-24
- ASTM E646-16
- ASTM F606-24
- ISO 10113 (2020)
- ISO 10275 (2007)
- ISO 898-1 (2015)
- ISO 6892-1 (2019)* (Method A1, Method A2, Method B and includes a method to setup for Annex F)
*Advanced TestProfiler methods for ISO 6892-1 and ASTM E8 / E8M are also included. These methods will automatically switch test machine control mode based on the type of yielding (continuous or discontinuous) and include all relevant calculation results. These methods require TestProfiler.
- ASTM D2256-21
- ASTM D2261-13 (2017)e1
- ASTM D5034-21
- ASTM D5035-11 (2019)
- ASTM D5587-15 (2019)
- ISO 2062 (2009)
- ISO 9073-3 (2023)
- ISO 9073-4 (2021)
- ISO 13934-1 (2013)
- ISO 13934-2 (2014)
- ISO 13935-1 (2014)
- ISO 13936-1 (2004)
- ISO 13936-2 (2004)*
*Requires TestProfiler
- ASTM A938-18
- Basic Cyclic Torsion Template
- Torsion to Failure Template
The Torsion Application Module is intended for use on static MT Torsion systems. The module includes the Torsion and Torsion Relax/Creep method templates. The Torsion template is used for creating twist to failure test methods and includes preload, pre-cycling and up to four test ramps. The Torsion Relax/Creep template is used for creating twist to a hold level test methods and includes preload, a test loading ramp and hold level.
