測試系統
- 自動化測試系統
- AT2 自動化 XY 平台
- AT3 3 軸非機器人自動化測試系統
- AT6 6 軸機器人自動化測試系統
- 自動注射器測試系統
- CT6 協作機器人測試系統
- ElectroPuls Automated XY Stage
- Instron 5900 系列多站式同步機械測試機架
- 碰撞模擬系統
- 動態和疲勞測試系統
- 8800 平面雙軸十字型測試系統
- 8802TT 軸向扭力動態疲勞測試系統 – 100 kN 和 1000 Nm 的荷重能力
- 低應變率 8862 伺服電動系統
- ElectroPuls® 16 工位測試系統
- ElectroPuls 系統
- 高溫疲勞測試系統
- 通用液壓疲勞測試
- 基於剛度的調整
- 高應變率 VHS 系統
- HDT 和維卡系統
- 衝擊、流變和熱機械測試系統
- 衝擊測試系統
- 實驗室健康檢查
- 停產系統
- 已停產的靜態液壓測試系統
- 試樣測量和製備
- 測試系統配件-停產
- 已停產的動態與疲勞測試系統
- 停產的電機式試驗系統
- HDT 與維卡測試機:生命週期狀態與升級選項
- 已停產的落錘式與擺錘式衝擊試驗機
- 停產軟體
- 流變儀和熔體流動測試儀
- 已停產的靜態液壓測試系統
- 流變儀與熔融流動測試系統
- 結構耐久性測試系統
- 結構耐久性與碰撞模擬測試機
- 系統改造和升級
- 扭轉外掛程式 3.0
- 扭轉測試系統
- 萬能試驗系統
測試軟體
- BHI Pendulum
- Bluehill Central 實驗室管理軟體
- 適用於 3400 系統上的基礎材料測試軟體 Bluehill Elements
- Bluehill Fracture 軟體
- Bluehill HV 軟體
- Bluehill Impact 軟體
- Bluehill Universal 材料測試軟體
- CrashSim 軟體
- DIC 重播
- LCF3 軟體
- Console Software For Use With Instron 8800 Systems, ElectroPuls and ExtendUpgrades
- LCF 3 低週次疲勞測試軟體,適用於 Instron 8800 系統與 Extend 升級
- CrashSim Office 軟體
- RS LabSite® modulogic
- WaveMatrix™3 動態與疲勞測試軟體
測試配件<
- 適用於 ASTM E1012 和 Nadcap 的 AlignPRO Alignment System
- Application Specific Fixtures
- AutoX750 自動接觸式引伸計
- AVE2 進階視訊引伸計
- AVE3 進階影像延伸計
- Axial Clip-on
- 電池測試解決方案
- 生物醫學系統及配件
- 複合材料測試夾具
- Compression Deflectometers (LVDT)
- 壓縮壓板
- 聯軸器和轉接器
- 裂縫開口位移(COD)量測器
- 碰撞類比配件
- 2-Piece Sled
- Camera Outriggers
- Low Speed Rear Impact Simulation
- Pitching
- Quick Clamping System for Test-Setup-Pallets
- Side and Pole Impact Simulation
- Custom Accessories
- 環境試驗箱和爐具
- 延伸計
- 緊固件夾具
- 彎曲夾具
- 3 and 4 Point Fatigue Flexure Fixtures
- Flexure Fixture, Fatigue 3 Point
- Flexure Fixture, Fatigue 3 Point
- Flexure Fixture, Fatigue 3 Point
- 20 kN 三點與四點彎曲夾具 – 2810-500/505
- 3-Point and 4-Point Bend Fixture
- 三點彎曲測試夾具
- 食品測試夾具
- 最高達 1,200°C 的 High-Temperature 引伸計
- 荷重元
- 載荷框架與衝擊系統附件
- 碎屑防護罩
- Hydraulic Grip Pump
- 8800 Series Servohydraulic Test Systems
- 8800 Series
- Strain Conditioner for 8800MT Series (Control and Data Aquisition)
- Strain Conditioner for 8800MT Series (Data aquisition only)
- Air Cushion Isolators
- Air Cushion Isolators (for frames 3 & 4); Not Suitable for 8801 or 8516; Suitable for Testing Frequencies Above 15Hz
- Isolation Mounts for 8801 or 8516 (1 set); For Testing Frequencies Above 15Hz.
- 液壓夾具控制器
- 氣動夾具用之氣源套件
- 機電式框架配件
- Electropuls All-Electric Dynamic Test Systems
- Safety Guard for ElectroPuls E1000 Test Instrument
- Safety Guard for ElectroPuls E10000 Test Instrument
- Safety Guard for ElectroPuls E3000 Test Instrument
- Safety Guard for ElectroPuls E20000 Test Instrument
- 適用於 ElectroPuls 測試系統的高剛性支撐桌
- 液壓夾具泵
- Loadframe Support Tables/Bases
- MPX 擺錘式衝擊試驗機配件
- 靜態油壓萬能材料試驗系統機架附件
- 長行程延伸計
- 剝離、摩擦和穿刺測試夾具
- 試片製備裝置
- 靜態軸向夾式引伸計
- 拉伸夾具
- 螺桿側動拉伸夾具
- 高級液壓楔形夾具
- Compact Tension Fixtures for Fracture Mechanics
- Compact Tension Fixtures for 50mm Wide Compact Tension Specimens
- Compact Tension Fixtures for 12.5mm Thick Compact Tension Specimens
- Compact Tension Fixtures for 25 mm Thick Compact Tension Specimens
- Additional Extension Rod 2780-120
- 繩索絞盤拉伸夾具
- Elasticated Fabric
- 疲勞額定機械楔形作用拉伸夾具
- 2742-102 – ±1 kN 機械式疲勞夾具
- 2742-206 ±3 kN, ±25 Nm 疲勞額定機械楔形夾具
- 2742-316 – ±10 kN ±100 Nm 線性扭轉機械楔形夾具
- 2743-402 疲勞額定機械式楔形夾具(±100 kN)
- 纖維絲束拉伸夾具
- 液壓側向動作拉伸夾具
- Hydraulic Wedge Action Grips
- Hydraulic Wedge Action Grips 300kN (67,500 lbf)
- Hydraulic Wedge Action Grips 2000kN (450,000 lbf)
- 油壓鍥型夾具 1500kN (337,500lbf)
- 油壓鍥型夾具 1000 kN (225,000 lbf)
- Hydraulic Wedge Action Grips 600kN (135,000 lbf)
- 機械式楔形夾具
- Mechanical Wedge Lever Action Grips
- Lever Action, Mechanical Wedge Grips; Capacity: 150 kN
- Lever Action, Mechanical Wedge Grips; Capacity: 100 kN
- 150 kN Lever Action Mechanical Wedge Grips
- 微電子拉伸夾具
- Pneumatic Lead Pull Grip. Rated capacity: 500 N
- Micro Pneumatic Grips, Side Action. Rated capacity: 10 N
- 氣動繩索和紗線拉伸夾具
- Pneumatic/Hydraulic Power Supplies
- 氣動側動夾具
- Pneumatic Wedge Action Grips
- 氣動楔形夾具
- 自緊式偏心滾輪拉伸夾具
- 螺紋端與鈕扣端夾具本體與嵌件
- Torsion and Axial-Torsion Grips
- Axial-Torsion Wedge Grips
- Chuck Style
- 筒夾式扭轉夾具
- Large Collet Grip Assembly, Range 6.3 – 14.25 mm (0.25 in – 0.5625 in)
- Small Collet Grip Assembly, Range 0.8 – 6.3 mm (0.03125 – 0.25 in)
- Socket Style
- 織帶絞盤拉伸夾具
- 電線和電纜拉伸夾具
- 測試板
- 橫向夾持式延伸計
- Transverse Averaging Extensometer for “r” Value on Sheet Metal
- Transverse Extensometer, range +/- 0.1 in
- Transverse Extensometer, range +/- 2.5 mm
- 材料測試配件型錄
- 木材測試夾具
服務
- 材料測試系統校準
- ISO/IEC 17025 認證校準實驗室
- 延長保固與保護計畫
- Implementation Assistance
- 安裝與移機
- Instron Connect
- Instron 服務合約
- Return Material Authorization (RMA) Request
- Strain and Extensometers
- 系統移動和重新定位服務
- Temperature Verification
- Thank You for Submitting a Return Material Authorization Request
- Updating or Upgrading Your Instron System and Software
ASTM
- 金屬醫用骨螺釘的 ASTM F543 測試方法
- ASTM A370、ISO 6892-1、ISO 3183 和 API5L:管材拉伸測試
- ASTM A370:鋼鐵產品機械性能測試
- ASTM A370、A416、ISO 15630 預力混凝土多股鋼絞線拉伸測試
- 符合 ASTM E8、A370、A48 和 GOST 1497-1 標準的拉伸測試夾持解決方案
- ASTM A615 – 混凝土加固用變形和普通碳鋼鋼筋的標準規範
- ASTM A746 球墨鑄鐵重力下水道管規範
- ASTM A938 / ISO 7800 線材扭轉測試
- ASTM C109
- ASTM C1550 Flexural Toughness of Fiber Reinforced Concrete
- Flex Testing of Fiber Reinforced Concrete to ASTM C1609-10 (Translated to zh-hant)
- ASTM C170 石材的抗壓強度
- ASTM C297 – Tensile Strength Composite Sandwich Constructions
- ASTM C365
- ASTM C39
- ASTM C633 Adhesion or Cohesion Strength of Thermal Spray Coatings
- ASTM C78 Flexural Strength of Concrete Beams
- ASTM C880 Flexural Strength of Dimension Stone
- ASTM C99 Modulus of Rupture of Dimension Stone
- ASTM D1004 塑膠薄膜或片材的抗撕裂性 (Graves 撕裂)
- 使用微拉伸試片測定塑膠的 ASTM D1708 拉伸性質
- ASTM D1002
- ASTM D1037
- ASTM D1238
- ASTM D1238 – Testing High Fluidity Samples with a Piston Holding Device
- ASTM D1335
- ASTM D1414
- ASTM D1525
- ASTM D1621
- ASTM D1876
- ASTM D1894 塑膠薄膜摩擦係數
- ASTM D2256
- ASTM D2261
- ASTM D2344 短樑強度測試指南
- ASTM D2444 Impact Resistance of Plastic Pipe and Fittings
- ASTM D256對回收碳纖維製成的碳/PPS複合材料的Izod衝擊
- ASTM D256 Impact Strength of 3D Printing Peek
- ASTM D3039 聚合物基複合材料的拉伸性能
- ASTM D3163
- ASTM D3330
- ASTM D3364 Flow Rates for Poly Vinyl Chloride
- ASTM D3410
- ASTM D3574
- ASTM D3763 塑膠材料之高速穿刺特性
- ASTM D3822 紡織纖維拉伸性能
- ASTM D3835: Extrusion of neat and carbon reinforced polyether ether ketone (PEEK)
- ASTM D3846 In-Plane Shear Strength of Reinforced Plastics
- ASTM D4018
- ASTM D412
- ASTM D413 橡膠特性—與柔性基材的黏合強度
- ASTM D429 Rubber Property – Adhesion to Rigid Substrates
- ASTM D4632:土工布抓樣斷裂負荷與伸長率的標準測試方法
- ASTM D5034 紡織品斷裂強度和伸長率抓取測試
- ASTM D5035
- ASTM D5587 梯形法織物撕裂強度
- ASTM D575-91
- ASTM D5766
- ASTM D5961
- ASTM D6110 Determination of Charpy Impact Properties
- ASTM D6272 Flexural Properties of Plastics and Electrical Insulating Materials
- ASTM D638 塑膠拉伸性能
- ASTM D6484
- ASTM D6641
- ASTM D695 硬質塑料壓縮試驗
- ASTM D7136/D7136M-05 Measuring Damage Resistance of Composite to Impact Event
- ASTM D7137
- ASTM D7192 High Speed Puncture Properties of Plastic Film
- ASTM D7269 Testing Aramid Cords: The Proper Grip
- ASTM D7860
- ASTM D882
- ASTM D885 Industrial Filament Yarns Made from Manufactured Organic-Based Fibers
- ASTM D903
- Wood Shear Testing
- Fire Resistant Steel: High-temp testing related to ASTM E119
- ASTM E1820
- ASTM E190
- ASTM E208 Drop Weight Test for Nil-Ductility Temperature of Ferritic Steel
- ASTM E21
- ASTM E23 次尺寸試片之擺錘衝擊測試
- ASTM E290
- ASTM E345
- ASTM E399
- ASTM F1306
- ASTM F1614 Impulse and Fatigue of Athletic Footwear Using Energy Control
- ASTM F1717
- ASTM F2077
- ASTM F2193
- ASTM F2256 Strength Properties of Tissue Adhesives by T-Peel Testing
- ASTM F2267
- ASTM F2346 Characterization and Fatigue Testing of Spinal Intervertebral Disc Prostheses
- ASTM F2412 – Impact Resistance – Safety Shoes
- ASTM F2458 Wound Closure Strength of Tissue Adhesives and Sealants
- ASTM F2516 鎳鈦諾材料拉伸測試
- ASTM F2606
- ASTM F382 Flexural Fatigue Testing Metallic Bone Plates
- ASTM F384 Metallic Angled Orthopaedic Fracture Fixation Devices
- ASTM F606 緊固件、墊圈及鉚釘測試
- ASTM F88 軟性屏障材料密封強度
- Bone Screw Testing
- ASTM F3014
- ASTM F2150 Testing Polymer Hydrogels
- ASTM D624 橡膠和彈性體的撕裂強度測試
- ASTM D790 塑膠彎曲試驗
- ASTM E8 金屬材料拉伸測試
ISO
- ASTM A370、ISO 6892-1、ISO 3183 和 API5L:管材拉伸測試
- ASTM A938 / ISO 7800 線材扭轉測試
- ISO 101132006
- ISO 10275:2007 —拉伸應變硬化指數
- ISO 10310 Non-Contact extensometry for Geosynthetics
- ISO 10555 Tensile Testing of Intravascular Catheters
- ISO 11040 預灌封注射器測試指南
- ISO 11193
- ISO 1133 Melt Mass-Flow Rate and Melt Volume-Flow Rate Thermoplastics
- ISO 1133-2 and ASTM D1238: when Load Cell ensures Repeatability of Results.
- ISO 11339
- 胶粘剂的冲击性能(ISO 11343)
- ISO 11443, ASTM D3835 Determination of Properties of Polymeric Materials with a Capillary Rheometer
- ISO 11443 and ASTM D3835 tests to study Polymer Degradation
- ISO 11443 – Rheology of Heat-Curing Elastomers/Silicone at Room Temperature
- ISO 11443 Fluidity of Plastics Using Capillary and Slit Die Rheometers
- ISO 11443 Research, Design and Quality Assurance for Injection Moulding
- ISO 11443 – Rheology of low viscosity fluid for spray application
- ISO 11443:擠出物膨脹
- ISO 11608 Testing Needle-Based Injection Systems
- ISO 11897 Thermoplastic Flexible Film Packaging, Tear Propagation Edge Folds
- ISO 12111 & ASTM E2368
- ISO 13001 and ASTM D3479 Improving Throughput in Composites Fatigue Tests
- ISO 13934-1
- ISO 13937-2 Tear Properties of Fabrics
- ISO 13937-3 Tear Properties of Fabrics
- ISO 13937-4 織物撕裂性能 – 舌形試樣
- ISO 14125 Flexural Properties of Fiber-Reinforced Plastic Composites
- ISO 14126 In-Plane Compressive Properties of Fiber-Reinforced Plastic Composites
- ISO 14129 面內剪應力/剪應變響應
- ISO 14130 透過短樑法測定表觀層間剪切強度
- ISO 1421:1998 Determination of Tensile Strength and Elongation at Break
- Tensile Strength of Basalt Fiber Reinforced Plastic (BFRP) Rebar
- ISO 14801
- ISO 14879
- ISO 15630-1
- ISO 16402 Flexural Testing of Acrylic Resin Cements Used in Orthopaedics
- ISO 17744 Determination of specific volume as a function of temperature and pressure (pvT diagram)
- ISO 179-2 Determination of Charpy Impact Properties – Instrumented
- ISO 1798 軟質泡棉聚合物材料拉伸強度
- ISO 180 Determination of Izod Impact Strength
- ISO 18489
- ISO 1926 Rigid Cellular Plastics Tensile Properties
- ISO 2062 Single-end Breaking Force and Elongation at Break of Yarns from Packages
- ISO 20795-1 and 20795-2 Flexure Test of Base Polymers
- ISO 2411 Coating Adhesion Rubber-Coated Plastics-Coated Fabrics
- ISO 306決定維卡軟化點溫度(VST)
- ISO 3133, ISO 3349, & ASTM D143
- ISO 3183 Fastener Double Shear Testing
- ISO 34-1
- ISO 36
- ISO 37
- ISO 4587
- ISO 527-2
- ISO 527-3
- ISO 527-4
- ISO 604:塑膠壓縮性質
- ISO 6383-1 Tear Resistance Plastic Film and Sheeting
- ISO 6603-2 Impact Resistance of Composite Materials – Nautical Applications
- ISO 6603-2 Puncture Impact Behavior of Rigid Plastics
- ISO 6603 – ASTM D3763: Quick impact at low temperature
- ISO 6872 Flexural Strength Testing of Dental Ceramics
- ISO 6892:金屬材料拉伸試驗
- ISO 6892-2
- ISO 7206-4, 7206-6 and 7206-8
- ISO 75和ISO 306對高溫聚合物的HDT和VST測試
- ISO 7886-1:無菌皮下注射器測試
- ISO 80369 醫療保健應用中液體和氣體用小口徑連接器
- ISO 8067:軟質泡沫聚合材料撕裂強度測試
- ISO 813 Adhesion Strength of Rubber to Rigid Substrates
- ISO 8256 Tensile Impact Tests on Playing Cards (PVC)
- ISO 8295 塑膠薄膜和薄片的摩擦係數
- ISO 844 Rigid Cellular Plastics Compression Properties
- ISO 898-1
- ISO 9073-4 Tear Resistance Nonwovens
- ISO/TS 11405 Tensile Adhesion and Bond Strength of Dental Materials and Adhesives
- ISO 178 權威指南
其他
- AITM Airbus Test Method for Determination of Compression Strength After Impact
- ANSI/AWS B4.0
- ASTM A370、ISO 6892-1、ISO 3183 和 API5L:管材拉伸測試
- Axial Torsion Fatigue Testing
- Ball Indent Test Fixture
- Blister Pack Testing
- BSS 7260 Post-Impact Compressive Strength of Composite Laminates
- BS EN 319 Perpendicular Tensile Strength of Particleboards and Fiberboards
- Rheological tests on cap liners manufactured for plastic bottle caps
- Fatigue Testing of Compressor Valves
- Fatigue Testing of Computer Keyboards
- Multi-Axial Stress States Cruciform Specimens
- Shear Adhesion Strength Testing Dental Materials and Adhesives
- Impact Performance of Polycrystalline Diamond Cutters
- 鑽頭刀尖的壓扭疲勞測試
- Durability and Fatigue Testing of Elastomeric Materials and Components
- 使用 ElectroPuls® 進行彈簧模擬
- Electro-Thermal Mechanical Testing
- EN 12089: Determination of Bending Behavior of Thermal Insulation Products
- EN 12090: Determination of Shear Behavior of Thermal Insulation Products
- EN 12242
- EN 14477 軟性包裝抗穿刺性
- EN 14509 Shear Strength and Shear Modulus Roofing and Cladding Sandwich Panels
- EN 1465
- EN 1719
- EN 2561:1995 碳纖維增強塑膠 — 單向層壓板 — 平行於纖維方向的拉伸測試
- EN 2597
- EN 50086-2-4 Conduit Systems, Cable Management Underground
- EN 826: Determination of Compression Behavior of Thermal Insulation Products
- EN 868-5
- EN12430 Point Compression of Thermal Insulation
- Extrusion Plastometer Manual Mass Selector
- Dynamic Fatigue Testing Femoral Nails
- High Velocity Three-Point Bending Test – Fiber Cement Materials
- Fatigue Testing of Finger Implants
- FTM2
- 金屬之高應變率測試
- High-speed impact testing on dashboards
- IS 1608
- EN 1939 Peel Adhesion Self Adhesive Tapes
- ISO 29862 / EN 1939 Self-Adhesive Tapes: Determination of Peel Adhesion Properties
- JEDEC JESD22B113
- Edgewise Drop Impact on Liquid Crystal Display (LCD) glass panels
- Low Force Dynamic Fatigue Testing of Tissues and Biomaterials
- In Vitro Microindentation of Bone to Determine Mechanical Properties
- MIL-STD-883
- NADCAP Alignment Standards
- NASM 1312-13 Fastener Double Shear Testing
- NIJ 0115.00
- 藥錠壓碎測試
- AC133 Rebar Coupler Test of Mechanical Connector Systems
- 醫用瓶殘留密封力測試
- Impact Performance of Roofing Tiles
- Impact Performance of Safety Helmets
- Shock Absorbers
- Impact Resistance of Plastic Shotgun Shell Wadding
- 固體火箭推進劑 mechanical properties 測試
- Dynamic Investigation on the Influence of Inflation Pressure in Sports Balls
- 支架材料與結構的疲勞測試
- Surgical Sutures
- Syringe Needle Testing
- TAPPI
- Lower Force Dynamic Fatigue Testing Plastics
- Fatigue and Fracture Testing of Tire Reinforcement Wire
Automotive
- Chassis
- Bumper Impact Testing
- Chassis and Body High Strain Rate Testing
- 複合材料層壓板衝擊後壓縮測試
- Composite Laminates Tensile Testing
- Crash Simulation
- Exhaust Line Durability Test
- Exhaust Mount Fatigue Testing
- Fatigue Testing
- Full Vehicle Testing
- Road Simulation System
- Sheet Metal Bend Testing
- Sheet Metal Tensile Testing
- Structural Durability
- Drivetrain
- Axle Test System
- Clutch Durability Testing
- Drive Shaft Durability Testing
- Drive Shaft Torsion Testing
- Shock Absorbers Impact Test
- Electronics
- 符合 AEC-Q200-005 標準的 PCB 彎曲測試
- Automotive Button and Switch Force Testing
- Display Panel Testing
- Electrical Wire and Insulation Tensile Testing
- Terminal Strength Test
- Engine
- Interior
- Dashboard Drop Weight Impact
- HDT and Vicat Testing
- Headliner Peel Testing
- In Situ Testing
- 旋鈕與按鈕拉伸/扭轉測試
- Plastics Tensile Testing
- Rigid Plastics Bend Testing
- Seating Foam Compression Testing
- Textiles Testing
- Joining
- Safety Systems
- Wheel and Tire
Biomedical Testing
- 21 CFR Part 11
- Biomaterials
- Bioadhesives Peel Testing
- Hard Tissue Testing
- Hydrogel Tensile Testing
- 骨科植入物的衝擊測試
- 藥錠的衝擊表現
- Soft Tissue Testing
- Tensile Testing Polymeric Membranes
- 使用可變式角度剝離夾置具之組織黏著劑測試
- Dental
- Drug Delivery Device and Container Testing
- Guide to PPE Testing
- Implantable Devices
- 隱形眼鏡測試
- Evaluation of Radial Forces from Embolic Filters
- 心臟節律器測試
- 眼部植入物測試
- Radial Force Evaluation of Stent Grafts
- 支架測試
- Medical Consumables
- On Body Delivery Systems
- Orthopedics
Electronics
- Electronic Devices
- 電纜與電線的彎曲測試
- Bend Testing of Devices
- Bend Testing of Screens
- Button and Switch Tactility Testing
- Compression Testing of Batteries
- Headphones Compression Testing
- Insert and Extract Testing on Devices
- Multi-Point Compression Testing of Screens
- Peel Testing of Screens
- Fine Wires
- General Purpose Applications
- Keypad
- Microelectronics
Blog
- Instron Connect:整合系統資訊與支援服務
- 6800 系列的同步數據採集
- 無矽油預充式注射器:功能測試
- 大容量藥物輸送裝置測試
- 同步數據採集解析
- 歐盟機械規範與網路韌性法案
- 增材製造生物醫學設備的疲勞測試
- 校正中的判定規則
- 用於增材製造航太元件的斷裂測試
- 什麼是質地分析儀?
- ISO 11040-8 2026:預充式注射器測試指南
- AI 時代下的半導體測試
- 精準疲勞測試對增材製造汽車零件至關重要
- 積層製造的疲勞性能:設計、測試與資格認證的挑戰
- 通用西林瓶夾具-殘餘密封力測試
- 為什麼增材製造需要不同的力學測試方法
- 髮絲纖維拉伸測試設備
- 落錘試驗機如何提升拉伸強度衝擊測試?
- AT1 自動化系統問答介紹
- 校準 vs 驗證:精準度的語言
- 校正服務商選擇:校正不確定度如何影響您的測試準確性與風險
- 打造更優良的藥物傳輸裝置
- 複合材料測試中,為何精準度至關重要
- 如何將傳感器連接到 Instron 系統:四種方法
- USP 381 及其替代品的轉型
- 您的測試實驗室 Windows 11 準備好了嗎?
- 製藥業焦點:擴展藥物傳遞裝置的測試能力
- 降低高溫材料測試的變異性
- MFI 測試如何做對:高流動與低流動材料的 4 種解決方案
- 適用於 Pendulum 的 Bluehill Impact
- How to Choose the Right Mechanical Testing Automation for Your Biomedical Manufacturing Lab
- 生物醫學產業的機械測試
- CDMO 生物醫學實驗室有效機械測試自動化的 5 個步驟
- 自動化如何改善塑膠測試
- 落錘衝擊測試如何優化延性至脆性轉變溫度的測量
- 選擇擺錘式衝擊試驗機時的 5 大考量因素
- NLR Unveils Instron’s E20000 All-Electric Fatigue Machine
- How to Achieve More Repeatable Test Results in 3D Printing Applications
- The ABCs of XY Stage Adhesive Tack Testing
- Melt Flow Index Tester Maintenance: top tips to optimize repeatability and accuracy
- Top Benefits of Semi-Automation for Materials Testing
- How To Decrease Variability in Test Results with Specimen Protect
- I Hope This Tree Isn’t Afraid of Needles!
- Heat Deflection Temperature and Vicat Softening Temperature Testing
- Definitive Guide to Syringe Testing per ISO 11040 & ISO 7886
- Drop Weight Impact Test: Top Tips for Accurate Results
- AutoX750 延伸計對準提示
- Why is Pendulum Impact Testing Important in Research
- How to Perform a CAI Test More Accurately and Safely
- Using a 3-Jaw Chuck for Materials Testing
- How to measure the Melt Flow Index of recycled and biodegradable plastics
- Mechanical Testing of Additive Manufactured Components
- Falling weight impact testing for simulation precision: meet Lamborghini
- Manual or Automatic Melt Flow Index Testers
- 5 steps to selecting hammers for your pendulum impact testing machine
- How is an Impact Drop Tower used in Testing Automotive Parts
- Wedge Peel Impact Test on Adhesives
- How to test carbon fiber impact strength
- Pendulum Impact Testing Machine or Drop Tower
- Product Spotlight: Component Test Plate
- Origami-based structures under Impact load
- Drop Tower Tensile Impact Testing for High Strain Rate Measurements
- How to Test the HDT of 3D Printing Materials
- How To Investigate Dynamic Failures of Materials
- 生物醫學、塑膠與彈性體產業的材料與應用解決方案
- Will Product Failure Put Your Company at Risk?
- Compression Testing of Concrete Blocks with Recycled Plastic
- Alignment for Materials Testing Webinar
- Braided Rope Tensile Testing
- Traceability Webinar + Q&A
- Biaxial Testing of Medical Devices
- Biomedical Case Study | Ghent University
- Bluehill® Universal Software: Top 5 FAQs
- When You Don’t Take Advantage of Software Updates
- “觸控友善”軟體實際上是什麼意思?
- Micro Three-Point Bend Testing for Microelectronics
- Own Your Data and Results: Export Files, Import to LIMS
- How Important is Calibrating Materials Testing Systems?
- Traceability: What is it, and Why is it Important in Testing of Materials?
- Growth of ITW Young Professionals Network in Europe
- Gage Repeatability and Reliability: Ensuring Accurate Test Results for Measurement Systems
- Metals Market Reacts to Material Trends
- Plastics Analysis for Automotive Applications
- Why Measure Strain Optically?
- Why Measure Strain Optically?
- Opticle Strain Article
- What Value Does ISO 9001 Add?
- Custom Fixture for Plastic Drinkware
- Olympic Edge: Optimizing Athletic Equipment
- Custom Solution for Testing in Extreme Environments
- Non-Contacting Strain Measurement Techniques in Fatigue Testing of Polymer Matrix Composites
- Penn State Students Receive a Behind-the-Scenes Tour
- Small Transitions to Automation Make a Big Impact
- Increase Efficiency Without Sacrificing Safety
- 克服金屬薄板測試挑戰
- Instron Supports MassChallenge Startups
- Step-by-Step Tutorial on Using Melt Flow Tester to ISO 1133 and ASTM D1238
- Importance of Medical Packaging Standards
- The Benefits of Automated Materials Testing
- Steel Reinforcement Bar: A Tensile Testing Guide
- Simulating Body Temperature When Testing Biomedical Devices and Materials
- Building a Business Case for Modernisation: An Interview with Nick Shrubsall
- Overcoming Challenges of Rebar Testing
- Digital Image Correlation for Measuring Full-field Strain and Displacement
- Have You Thought About The Implications If The Material for Airbags Responds Poorly?
- AZoM Interview: 3 Challenges of Plastics Testing
- Contrasting Composites vs. Metals in Aerospace
- Future Engineers Taking a Hands-on Approach at WPI Using Instron Equipment
- Supporting Science, Technology, Engineering, and Mathematics (STEM) Programs
- The MPX Series of Motorized Pendulum Impact Testers: An Interview with Matthew Spiret
- Is This the Next Generation of Smartphone Cases?
- 包裝測試的技巧與訣竅
- Helping to Standardize High-Rate Testing of Composites
- Question From a Customer: Air Bubbles in Extrudate
- Challenges of Rigorous Demands
- Evaluating the Quality of High Performance Plastics Molding
- Is Design Validation Slowing Down Your Time To Market?
- Stress Control and Yielding Material
- How to Test Lap-Shear Specimens
- Understanding Melt Flow Testing and Its Importance
- Helping to Provide the Good Housekeeping Seal of Approval
- Testing a Student-Made Off-Road Vehicle
- Preloading, and How It Affects Your Mechanical Test
- Automated XY Stage System Preventing Shattered Glass and Inaccurate Data
- Oyster Glue Inspiring Stronger Adhesives
- High Frequency Testing of Nitinol Wire
- Consumer Reports Uses Instron for Bend Testing Smartphone
- Quick Tips for Balancing Load Cells
- What is the Best Way to Grip Thin-walled Steel Tubes for Tension Testing?
- WPI Students Test ACL Graft Pretension Methods
- Extensometer Slippage
- Efficiency of Continuously Increasing Load During Tests
- How Do You Prepare Your Specimens?
- 正在尋找保持彎曲測試試樣安全對齊的方法嗎?
- Composites on the Move
- 減少塑膠測試中的變異性
- Does a Charpy or an Izod Impact Test Replicate any Real-Life Scenarios?
- Reminder to Not Let Your Standards Slip
- Quick Tip: Determining if a Specimen is Too Heavy for Your Test
- Backward Strain at Yield — Discontinuous Yielding/YPE Material
- Wedge Action Grips: Which is Moving?
- The Truth About Strain Gauge Load Cells vs. Pressure Transducers
- Thermoset and Thermoplastic Composites … What’s the Difference?
- Testing United States Bridges at Columbia University
- 4-Point Bend Testing of Carbon Fiber
- 管材與管件製造商及供應商應了解的變革
- Charpy Impact Testing: Minimizing Hammer Changes
- Software Module Increases Test Frequency for Fatigue Testing of Composites and Polymers
- What is The Difference Between Proportional and Non-proportional Clamping Force?
- What is the Best Way to Check the Functionality of my ElectroPuls™ Load Cell?
- What is N-value?
- Testing Metals to ASTM E8 with an Automatic Contacting Extensometer
- Energy-Controlled Impulse Testing of Shoes
- Question From a Customer: How to Report Strain at Break Following ASTM D638
- Calling all Hockey Players: How Safe & Durable is Your Equipment?
- Challenges with Steel
- Question from a Customer: What tup do I use on my 1,800 J (1,330 ft-lb) drop tower?
- Carbon Fiber Hits the Road
- Poisson’s Ratio Testing With A Biaxial Extensometer
- Simulating a Spring with the ElectroPuls
- Upper Yield Calculations—Discontinuous Yielding/YPE Material
- What Does Load Measurement Accuracy of 0.5% of Reading Down to 1/100th, 1/500th, 1/1000th of a Load Cell’s Capacity Imply?
- Industry Insights Series with David Fry
- Equipment Considerations for a Well-aligned Test
- Question from a Customer- Bagley Correction
- Google for Test Results
- A New Long-Term Bypass Solution
- Question from a Customer
- What is Stress Whitening, and How Can it Impact Your Test
- Instron at the World’s Largest Wind Turbine Testing Facility
- Analysis at Every Stage of the Plastics Lifecycle
- Instron Supporting Britain’s Economic Growth
- Question From a Customer: Why is Strain Rate Important?
- Materials in Space
- Industry Insights Series with Marco Bronzoni
- Simulating a Physiological Environment
- Tips on Using Environmental Chambers and Furnaces
- What is R-Value?
- Stronger than Steel and more Elastic than Rubber
- Bamboo Bikes – A “Growth” Industry
- Composites Question from a Customer
- Strain Measurement When Testing Composites
- Testing Uncovers Titanic Mystery
- Fatigue Testing of Stents and Stent Materials
- Industry Update: Mechanical Testing of Stents and Stent Materials
- Quick Tip on Gripping
- Hobas Pipe USA Installs Giant Custom-Built Instron Frame
- Selecting a Pressure Transducer for Your Capillary Rheometer
- Question from a Customer
- A Very Deep Investment
- Quick Gripping Tips
- Engaging with Our Readers: Survey Findings
- Damage Tolerance: Is it Important to You?
- Free Whitepaper on Mechanical Testing of Medical Implants
- 30 Years and Counting
- Predicting the Properties of Virtual Materials
- Question from a Customer
- Grip it Right
- Protecting Mobile Devices from Impact Damage
- Creation of a New Generation of Testing Instruments: Part 2
- Creation of a New Generation of Testing Instruments
- What is the Impact on an Airplane Wing?
- Sometimes You Never Know Where This Job Will Take You
- Tennis and Composites – What’s the Connection?
Case Studies
- A Comparative Study of Test Result Variability
- AMRC
- ANH Refractories
- Beijing Naton Medical Group
- Boston University | KABlab
- Covalent 藉由 AVE3 擴展測試能力
- 寶武集團如何透過 ElectroPuls 解決變頻疲勞測試
- Ghent University
- Ghent University2
- INNOPROOF
- 透過自動化實現前瞻性佈局:Kiguchi Technics 對日本勞動力轉型的策略性應對
- LOLIWARE
- Polyset Company
- PRA
- Primo Medical Group
- Realtest Case Study
- Samyang Biopharm
- 西門子如何利用機器學習與 ElectroPuls® 預測 3D 列印零件的疲勞壽命
- Synoste 如何透過將測試轉為內部進行來加速醫療器材研發
- TPRC
- Tubular Services
- TÜV SÜD Case Study
- UCL 如何利用 ElectroPuls 測量癌組織微環境的剛度
- University Research
- Vamp Tech
- Wentworth Institute of Technology
- Whitehouse Laboratories
- ZF Shanghai Case Study
News
- Register Now for the 2025 Metals Testing Showcase
- 25 Ways to Test a Syringe: On-Demand Webinar
- Bluehill Central 2 軟體平台發佈
- Bluehill Universal 軟體新增多爐高溫測試功能
- 慶祝 80 年創新
- Dortmund Biomedical Workshop
- Instron 推出 100 kN 桌上型萬能試驗系統
- Instron Exhibiting at CAMX 2024
- Instron Exhibiting at InterBattery 2025
- Instron Exhibiting at InterBattery 2026
- Instron Exhibiting at JEC World 2024
- Instron Exhibiting at MDM West 2024
- Instron Exhibiting at NEPCON 2024
- Instron Exhibiting at NPE 2024 | The Plastics Show
- Instron Exhibiting at Prefilled Syringes West Coast 2024
- Instron Exhibiting at SAMPE 2024
- Instron Exhibiting at The Battery Show North America 2024
- Instron Exhibiting at The Battery Show Europe 2024
- Instron Introduces AverEdge32 for AVE2
- Instron Introduces Bluehill Central Lab Management Software
- Instron Introduces New 3400 and 6800 Series Universal Testing Systems
- Instron Introduces New 3400 and 6800 Series Universal Testing Systems in 100 kN and 300 kN Capacities
- Instron Introduces New Precision Specimen Loader for Thin Films and Foils
- Instron Introduces TrendTracker Module for Bluehill Central
- Instron Launches All-New Live Virtual Training Classes
- Instron 推出 Labtronic EVO
- Instron 推出全新 AVE3 進階ㄧ影像延伸計
- Instron 推出下一代自動注射器測試系統
- Torsion Add-On 3.0 for Axial Test Systems
- Instron Releases New 9400 Series Drop Towers Featuring Bluehill® Impact Software
- Instron Releases New Bluehill Impact Software
- Instron Releases Traceability Module in Bluehill Universal
- Instron 服務推出 Instron 遠端技術支援
- Instron Statement on Log4j Vulnerability
- Instron Supports Development of New Composites Test Standard
- Instron 將參展 2026 年 JEC 世界複材展 (JEC World 2026)
- Instron to provide free remote training opportunities for students and teachers impacted by COVID-19
- Introducing Instron Connect
- Join Instron at Pharmapack 2026
- Migrate to newer Drop Weight Impact Testing technology to minimize risks
- Instron 推出新的 10 年機械系統保修
- New AT3 Floor Model Automated Testing System
Glossary
- 传感器
- 偏移降伏強度
- 彈性模量
- 抗拉強度
- 材料測試機
- 比例極限
- 致動器
- 異向性或異方性
- 砧座
- 校準
- 毛細管流變儀
- 毛細管流變儀模具
- CEAST:Compagnia Europea Apparecchi Scientifici Torino (CEAST)
- 壓縮永久變形
- 控制器
- 潛變測試
- 橫樑
- 動態機械分析 (DMA)
- 彈性滯後
- 彈性限度
- 伸長率
- 延伸量
- 延伸計
- 疲勞
- 疲勞測試
- 斷裂韌性
- 標距長度
- 夏比衝擊Impact Charpy
- 等向性
- Izod(衝擊)
- 載重
- 荷重元
- 荷重機架
- 載荷串:組件、對中與剛度
- 最大(屈服)載荷(衝擊)
- 熔體流動
- 韌性模數
- 頸縮
- 蒲松比Poisson’s Ratio
- 預先循環
- 壓力傳感器
- 提示測試
- 斜坡
- 正割彈性模量
- 剪切強度
- 試樣
- 試片保護
- 應變
- 應力
- 應力鬆弛
- 應力-Strain 圖
- 抗撕裂性
- 撕裂強度
- 使用擺錘衝擊試驗機進行拉伸衝擊試驗
- 斷裂時間
- 傳感器
- 真應力
- 測量不確定度
- 屈服點
- 屈服強度
Videos
- 薄膜的拉伸測試,符合 ASTM D882 / ISO 527-3 標準
- 2712-04x 系列氣動側動夾具
- 2716 系列機械楔形夾具
- 2820-036 可變角度剝離夾具
- 3-Jaw Chuck for Materials Testing
- 3500KPX | Static Hydraulic Universal Testing System
- 6 Benefits of Storing Testing Files in a Centralized Database
- 90° Pneumatic Peel Fixture: Testing Adhesion of Electrodes in Lithium-Ion Batteries
- 關於 Instron:機械測試領域的領導力量
- Accessing Calibration Certificates & Service History: Quick Tips From Instron® Service
- Accuracy and Usable Range of Load Cells
- Advanced Hydraulic Wedge Action Grips
- HDT 與 Vicat 測試的應用
- ASTM D1002: Lap Shear Testing of Adhesively Bonded Metals
- ASTM D1894 and ISO 8295: Coefficient of Friction on Plastic Film
- ASTM D3330:壓敏膠帶剝離強度測試方法
- ASTM D624: Tear Strength Testing of Rubber and Elastomers
- ASTM D695 / ISO 604: Compressive Properties of Rigid Plastics
- ASTM D903: Peel or Stripping Strength of Adhesive Bonds
- ASTM F1614: Shock Attenuation Testing of Athletic Footwear
- ASTM F88
- AT2 Automated XY Stage: Configured for Plastic Extrudate Crush Testing
- AT2 Automated XY Stage: Throughput and Efficiency
- AT3 Automated Film Tensile Testing to ASTM D882
- AT3 Automated Testing System
- AT3 Automated Testing System: Configured for Elastomer Testing
- AT3 Automated Testing System: Configured for Foil Testing
- AT3 Automated Testing System: Configured for Medical Glove Testing
- AT3 Automated Testing System: Configured for Metals Tensile Testing
- AT3 Automated Testing System: Configured for Thin Film Testing
- AT6 Automated Testing System: Configured for Metals Tensile and Hardness Testing
- AT6 Automated Testing System: Configured for Non-Ambient Elastomer Testing
- AT6 自動化測試系統:用於金屬拉伸測試的雙機架配置
- AT6 Automated Testing System: Testing Plastics, Elastomers, and Thin Films
- Autoinjector Testing System: Simple Test Methods
- Autoinjector: Device Changeover and System Alignment
- Autoinjector Testing System: Root Cause Analysis
- Extend Your Warranty Agreement
- 自動化旋轉測試系統
- 與 Bluehill® Universal 整合的自動試片測量裝置
- AutoX750 Automatic Contacting Extensometer
- AVE 2 Dynamic: High Force Applications
- AVE 2 Dynamic: Low Force Applications
- AverEdge32:用於金屬板材的高級平均橫向應變測量
- Axial Clip-On Extensometer
- A Beginner’s Guide to TestProfiler Webinar
- Bluehill 1, 2, and Lite: Your Software’s Next Steps
- Bluehill® 3 | Your Software’s Next Steps Webinar
- Bluehill Automation:更簡單的自動化程式編寫方式
- Bluehill Central: Lab Management Software from Instron
- Bluehill Impact Tup Calibration Alert for Drop Weight Impact Tester
- Bluehill Universal:高溫增益模組
- Busbar Terminal Weld Testing — For Electric Vehicle Batteries
- Charpy impact test
- Choice Inputs in Bluehill Universal Software
- Compression After Impact with a Drop Weight Impact Testing Machine
- CT6 Cobot Configured for Auto-Injector Testing
- CT6 Cobot Configured for Syringe Testing
- CT6 Cobot Configured for Torsion Testing
- Curved Needle Test System | Penetration Testing to ASTM F3014-14
- Cylindrical Cell Weld Testing — For Electric Vehicle Batteries
- DCPD Measurement for Fracture Toughness and Crack Growth
- Downloading Bluehill Universal Updates: Quick Tips From Instron Service
- Drop-Through Load Cell Adapter for 6800 Series Retrofits
- Electrical Contact Testing on a Universal Testing Machine
- ElectroPuls E20: Hamm-Lippstadt University Case Study
- ElectroPuls® E20000
- ElectroPuls® | G.RAU Inc. | 案例研究
- Environmental Chambers for Non-Ambient Materials Testing: 3119-600 Series
- Expert Tips for Testing Electronics
- Force and Strain | What You Need To Know Webinar
- The Hidden Variables in Your Test Results
- High Volume Hot Tensile Testing | Dual Furnace Setup on 68FM-100
- How To Optimize Your Lab Management with Bluehill Central
- 多特蒙德工業大學如何利用 ElectroPuls 推動患者專用植入物製造
- Inside Instron: Precision Manufacturing at Our Binghamton, NY Facility
- Instron 100 kN 桌上型機種
- Instron 2501 系列壓縮壓盤:開箱與安裝
- Instron 2810-40X 系列彎曲夾具
- Instron 3400 & 6800 Series System Retrofits
- Instron® 68FM Universal Testing Systems: Advanced Performance for High-Force Testing
- Instron® | 9400 系列落錘衝擊試驗機
- Instron® AT3 | Configured for Flex Testing
- Instron® AT3 | Configured for Tensile Testing
- AVE 2 Non-Contacting Video Extensometer
- Instron AVE3 先進影像延伸計
- Instron Connect
- Instron® Connect 與 Instron 專業服務
- Instron Connect Feature Highlights: SightCall
- Instron Connect InSkill: AI-Driven Troubleshooting Tool
- Instron Connect InSkill: Calibration Certs & Service History
- Instron Connect Portal: AI Troubleshooting Tool
- Instron Connect Portal: Calibration Certificates and Service History
- Instron Connect Portal: Creating an Account
- Instron Connect Portal: Downloading Software Updates
- Instron Connect Portal: Raising a Support Request
- Instron Connect Software: Bluehill 3 Screenshare
- Instron Connect Software: Bluehill Universal Screenshare
- Instron Connect Software: Calibration Reminders
- Instron Connect Software: Downloading Bluehill Universal Updates
- Instron® | CT6 Cobot With Universal Testing System
- 加州斯科茨谷(Scotts Valley)Instron 示範實驗室
- Instron® | ElectroPuls® Automated XY Stage
- Instron® Hydraulic Dual Side Acting Grips
- Instron® Professional Services | Do You Have an Instron Connect Agreement?
- Instron Professional Services: System Move and Relocation
- Instron Safety: How To Use a Tensile and Compression Testing System Safely
- Instron Training Center
- Autoinjector Testing System
- Intro to Composites Testing Standards and Methods
- Introducing Instron’s Next Generation Autoinjector Testing System
- Introducing TrendTracker for Bluehill Central Webinar
- Introduction to Instron Universal Testing Machines
- ISO 7886-1 Testing Sterile Hypodermic Syringes
- ISO 80369: Mechanical Testing of Luer Connectors
- ISO 844 | 硬質發泡塑膠的壓縮測試
- 夾面選擇
- Lab Management in Bluehill Central
- 大容量自動注射器測試與部分扭轉瓶蓋移除
- Level Up Your Materials Testing Data Integrity With Test Setup Essentials
- Long Travel XL Extensometer
- Materials Testing for Aerospace Applications
- Mechanical Testing of Additive Manufactured Materials & Components
- 醫療器材塑膠的機械測試網路研討會
- Melt Flow Index Testers
- MFi Series: The Importance of Deadweights
- Moving an Instron Dual Column Table Model Universal Testing System
- Moving an Instron Single Column Universal Testing System
- MPX Series Pendulum Impact Test System With Bluehill® Impact Software
- Multi-Station Test Frame for Simultaneous Mechanical Testing
- Named Transducers in Bluehill Universal
- 背負式荷重元轉接器
- Piggyback Load String Adapters
- Precision Specimen Loader for Thin Films and Foils
- 防止試片打滑:測試快速技巧
- Puncture Test Fixture: Testing Separator Film for Electric Vehicle Batteries
- 在肯特州立大學對歷史進行測試
- 力传感器快接头
- 快速安裝負載元件轉接器
- Quick Tips for Testing: Active Zones in Bluehill Universal
- Quick Tips for Testing: Bluehill® Universal 4.42 Calculation Fail Icons
- Quick Tips for Testing: Cable Management on 3400 and 6800 Series Systems
- Quick Tips for Testing: Clean Your Grips to Avoid Slips
- Quick Tips for Testing: Graduating with Cylinders
- Receiving Your Instron Electromechanical Universal Testing System
- Reducing Operator Risk on ElectroPuls Systems | eLearning Course
- Reducing Operator Risk on Servohydraulic Systems | eLearning Course
- Requesting Tech Support Using Instron Connect: Quick Tips from Instron Service
- Residual Seal Force Testing with the AT2 Automated XY Stage
- Retrofitting and Modernizing Legacy Testing Equipment
- Revision History in Bluehill Universal
- Righting and Moving an Instron Floor Model Universal Testing System
- Ring and Pin Features of Instron® 2580 and 2530 Series Load Cells
- 安全源於設計:6800 與 3400 系列機架
- 設定球面座壓盤
- Specimen Alignment Device CP135054
- Specimen Protect: 6800 and 5900 Series Universal Testing Systems
- Tack Testing Fixture Testing the Adhesion of Electrodes
- Teams in Bluehill Central
- Tensile Grip Guide
- Testing Insulin Delivery Devices
- The Definitive Guide to Metals Tensile Testing to ASTM E8 and ASTM A370
- 符合 ISO 11040 與 ISO 7886 標準的注射器測試權威指南
- Torsion Add-On 3.0 Handset for Universal Testing Systems
- TrendTracker for Bluehill Central Software
- TrendTracker Product Tour
- Understanding Strain Rate to ISO 6892-1 and ASTM E8
- WaveMatrix3: How to Easily Set Up Stress Channel Control Tests
- WaveMatrix3: How to Rapidly Manipulate Datasets to Regenerate Graphs
- WaveMatrix3 | Windows 11 Ready | Webinar
- Webinar: Control Charts and Statistics in Bluehill Central’s TrendTracker Module
- Webinar: How to Expand Your Testing Capabilities With Piggybacking
- Webinar: Introducing Bluehill® Central Software
- Webinar: Overcoming Mechanical Testing Challenges for EV Battery Material Development and Production
- Weld Testing Fixture: Prismatic Cell Weld Testing
- What Is a Universal Testing Machine/Tensile Testing Machine?
- What Is an Extensometer?
- What Is Bend Testing?
- 什麼是壓縮測試?
- 什麼是剝離測試?
- 什麼是拉伸試驗?
- Why Is Preventative Maintenance Important?
- Why Use a Mechanical Tensioner to Secure Your Load Cell